SPEC NO: DSAB0115 REV NO: V.2 DATE: APR/17/2002 PAGE: 1 OF 5
APPROVED : J. Lu CHECKED :Joe Lee DRAWN:Y.G
SURFACE MOUNT DISPLAY
APSC03-41EWW HIGH EFFICIENCY RED
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the lead emerge package.
4. Specifications are subject to change without notice.
Features
!0.3 INCH DIGIT HEIGHT.
!LOW CURRENT OPERATION.
!EXCELLENT CHARACTER APPEARANCE.
!I.C. COMPATIBLE.
!MECHANICALL Y RUGGED.
!WHITE F ACE,WHITE SEGMENT.
!PACKAGE:1100PCS/REEL.
Package Dimensions& Internal Circuit Diagram
Description
The High Efficiency Red source color devices are made
with Gallium Arsenide Phosphide on Gallium Phosphide
Orange Light Emitting Diode.
SPEC NO: DSAB0115 REV NO: V.2 DATE: APR/17/2002 PAGE: 2 OF 5
APPROVED : J. Lu CHECKED :Joe Lee DRAWN:Y.G
Electrical / Optical Characteristics at TA=25°°
°°
°C
Absolute Maximum Ratings at TA=25°°
°°
°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Selection Guide
.oNtraP.oNtraP .oNtraP .oNtraP.oNtraPeciDeciD eciD eciDeciDepyTsneLepyTsneL epyTsneL epyTsneLepyTsneL )dcm(vI)dcm(vI )dcm(vI )dcm(vI)dcm(vI Am01@ noitpircseDnoitpircseD noitpircseD noitpircseDnoitpircseD
.niM.niM .niM .niM.niM.pyT.pyT .pyT .pyT.pyT
WWE14-30CSPA)PaG/PsAaG(DERYCNEICIFFEHGIHDESUFFIDETIHW9.112.4 ,edohtaCnommoC lamiceDdnaH.tR
lobmySlobmyS lobmyS lobmySlobmySretemaraPretemaraP retemaraP retemaraPretemaraPeciveDeciveD eciveD eciveDeciveD.pyT.pyT .pyT .pyT.pyT.xaM.xaM .xaM .xaM.xaMstinUstinU stinU stinUstinUsnoitidnoCtseTsnoitidnoCtseT snoitidnoCtseT snoitidnoCtseTsnoitidnoCtseT
λkaep htgnelevaWkaePdeRycneiciffEhgiH726mnAm02=FI
λDhtgnelevaWetanimoDdeRycneiciffEhgiH526mnAm02=FI
λ∆ 2/1 htdiw-flaHeniLlartcepSdeRycneiciffEhgiH54mnAm02=FI
CecnaticapaCdeRycneiciffEhgiH51FpzHM1=f;V0=FV
V
F
egatloVdrawroFdeRycneiciffEhgiH0.25.2V Am02=FI
I
R
tnerruCesreveRdeRycneiciffEhgiH01AuV5=RV
retemaraPretemaraP retemaraP retemaraPretemaraP deRycneiciffEhgiHdeRycneiciffEhgiH deRycneiciffEhgiH deRycneiciffEhgiHdeRycneiciffEhgiHstinUstinU stinU stinUstinU
noitapissidrewoP 501Wm
tnerruCdrawroFCD 03Am
]1[tnerruCdrawroFkaeP 061Am
egatloVesreveR 5V
erutarepmeTegarotS/gnitarepO 04- °58+oTC °C
SPEC NO: DSAB0115 REV NO: V.2 DATE: APR/17/2002 PAGE: 3 OF 5
APPROVED : J. Lu CHECKED :Joe Lee DRAWN:Y.G
High Efficiency Red APSC03-41EWW
SPEC NO: DSAB0115 REV NO: V.2 DATE: APR/17/2002 PAGE: 4 OF 5
APPROVED : J. Lu CHECKED :Joe Lee DRAWN:Y.G
Recommended Soldering Pattern
(Units : mm)
APSC03-41EWW
SMT Reflow Soldering Instruction
Number of reflow process shall be less than 2 times and cooling
process to normal temperature is required between first and
second soldering process.
SPEC NO: DSAB0115 REV NO: V.2 DATE: APR/17/2002 PAGE: 5 OF 5
APPROVED : J. Lu CHECKED :Joe Lee DRAWN:Y.G
Tape Specification
(Units : mm)
