FEATURES
* Surge overload rating: 125 Amperes peak
* Low forward voltage drop
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
BR805
THRU
BR810
BR-8/10
Dimensions in inches and (millimeters)
Maximum Average Forward Rectified Output Current at
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC Method)
SYMBOL
V
RRM
V
DC
I
O
I
FSM
V
RMS
Volts
Volts
Volts
Amps
125 Amps
UNITS
50 100 200 400 600 800 1000
7035 140 280 420 700
560
50 200 400 600 800 1000
100
BR805 BR81 BR82 BR84 BR86 BR88 BR810
8.0
DC Blocking Voltage per element
V
F
I
R
1.1
500
uAmps
Maximum DC Reverse Current at Rated
Maximum Forward Voltage Drop per element at 4.0A DC Volts
@T
A
= 25
o
C
@T
C
= 100
o
C
10
Operating Temperature Range T
STG
-55 to + 150
0
C
T
J
-55 to + 125
0
C
Storage Temperature Range
VOLTAGE RANGE - 50 to 1000 Volts
CURRENT - 8.0 Amperes
RECTIFIER SPECIALISTS
R
DC COMPONENTS CO., LTD.
TECHNICAL SPECIFICATIONS OF
SINGLE-PHASE SILICON BRIDGE RECTIFIER
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
* Lead: MIL-STD-202, Method 208 guaranteed
* Polarity: Symbols molded or marked on body
* Mounting position: Any
* Weight: 6.9 grams
Tc = 50
o
C
I
2
t Rating for Fusing (t<8.3ms) I
2
t 166 A
2
Sec
Typical Junction Capacitance ( Note1)
C
J
200 pF
Typical Thermal Resistance (Note 2)
RθJA
21
0
C
/W
NOTES : 1.
Measured at 1 MH
Z
and applied reverse voltage of 4.0 volts
2. Thermal Resistance from Junction to Ambient and from junction to lead mounted on P.C.B. with 0.5 x 0.5" (13x13mm) copper pads.
236
NEXT
BACK
EXIT
NEXT
BACK
EXIT
NEXT
BACK
EXIT
R
DC COMPONENTS CO., LTD.
RATING AND CHARACTERISTIC CURVES (BR805 THRU BR810)
Heat-SinkK Mounting
PC Board Mounting
237
NEXT
BACK
EXIT
NEXT
BACK
EXIT
NEXT
BACK
EXIT