SENSITRON SEMICONDUCTOR LTP400-VY2C Technical Data Data Sheet 3654, Rev. A High Flux LED Features: * * * * * * * High power LED lamp. High flux output. Designed for high current operation. Low thermal resistance. Low profile Reliable Packaged in tubes for use with automatic insertion equipment. Mechanical Dimensions: In Inches / mm Notes: 1. All dimensions are in millimeters. 2. Tolerance is 0.25 mm (.010") unless otherwise specified. 3. Protruded resin under flange is 1.5 mm (.059") max. 4. Lead spacing is measured where the leads emerge from the package. 5. Specification are subject to change without notice. * 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 * * World Wide Web Site - http://www.sensitron.com * E-Mail Address - sales@sensitron.com * SENSITRON SEMICONDUCTOR LTP400-VY2C Technical Data Data Sheet 3654, Rev. A Absolute Maximum Ratings (TA = 25 C) Parameter Power Dissipation Continuous Forward Current Reverse Voltage Derating Linearly from 25 C Operating Temperature Range Storage Temperature Range Lead Soldering Temperature { 1.6mm(0.063inch) From Body Symbol PAD IAF VR Topr Tstg Parameters 200 70 5 0.40 -25 ~ +85 -40 ~ +85 Unit mW mA V mA/C C C - 260 5 (for 5 seconds) C Symbol - Parameters A1GaInP/GaP Ultra Yellow Water Clear Unit - 21/2 65 Degree v 2800 mlm D 592 nm 20 nm Electro-Optical Characteristic (TA = 25 C) Parameter Chip Material Light Color Lens Color Viewing Angle Typical @IF = 20 mA Total Flux Dominant Wavelength @IF = 20 mA Spectral Line Half-Width @IF = 20 mA Forward Voltage @IF = 20 mA Max. Reverse Current @ 5V VF IR 2.6 (Max) 2.25 (Typ.) 10 V A * 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 * * World Wide Web Site - http://www.sensitron.com * E-Mail Address - sales@sensitron.com * SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users' fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user's units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. * 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 * * World Wide Web - http://www.sensitron.com * E-Mail Address - sales@sensitron.com *