For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
1
v06.1212
HMC822LP6CE
FRACTIONAL-N PLL w/ INTEGRATED VCO
665 - 825, 1330 - 1650, 2660 - 3300 MHz
Functional Diagram
Features
• Tri-band RF Bandwidth:
665 - 825, 1330 - 1650, 2660 - 3300 MHz
• Ultra Low Phase Noise
-105 dBc/Hz in Band Typ.
• Figure of Merit (FOM) -227 dBc/Hz
• < 180 fs RMS Jitter
• 24-bit Step Size, Resolution 3 Hz typ
• Exact Frequency Mode
• Built-in Digital Self Test
• 40 Lead 6x6 mm SMT Package: 36 mm2
Typical Applications
• Cellular/4G Infrastructure
• Repeaters and Femtocells
• Communications Test Equipment
• CATV Equipment
• Phased Array Applications
• DDS Replacement
• Very High Data Rate Radios
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
2
v06.1212
General Description
The HMC822LP6CE is a fully functioned Fractional-N Phase-Locked-Loop (PLL) with an Integrated
Voltage Controlled Oscillator (VCO). The PLL consists of an integrated low noise VCO with a
tri-band output, an autocalibration subsystem for low voltage VCO tuning, a very low noise digital Phase Detector
(PD), a precision controlled charge pump, a low noise reference path divider and a fractional divider.
The fractional PLL features an advanced delta-sigma modulator design that allows both ultra-ne step sizes and
low spurious products. The phase detector (PD) features cycle slip prevention (CSP) technology to allow fas-
ter frequency hopping times. Ultra low in-close phase noise and low spurious also allows wider loop bandwidths for
faster frequency hopping and low micro-phonics.
For theory of operation and register map refer to the “PLLs with Integrated VCOs - RF VCOs Operating Guide”. To
view the Operating Guide, please visit www.hittite.com and choose HMC822LP6CE from the “Search by Part
Number” pull down menu.
HMC822LP6CE
FRACTIONAL-N PLL w/ INTEGRATED VCO
665 - 825, 1330 - 1650, 2660 - 3300 MHz
Parameter Condition Min. Ty p. Max. Units
RF Output Characteristics
VCO Frequency at PLL Input 1330 1650 MHz
RF Output Frequency at fVCO/2 665 825 MHz
RF Output Frequency at fVCO 1330 1650 MHz
RF Output Frequency at 2fVCO 2660 3300 MHz
RF Output Power at fVCO/2 911 13 dBm
RF Output Power at fVCO 2.5 6.5 10.5 dBm
RF Output Power at 2fVCO -9 -4 1dBm
VCO Tuning Sensitivity Measured at fo, 2V 15 MHz/V
VCO Supply Pushing Measured at fo, 2V -2 1.5 MHz/V
RF Output fo/2 Harmonic Doubler Mode -22 -18 dBc
RF Output 3fo/2 Harmonic Doubler Mode -50 -41 dBc
RF Output 2nd Harmonic fo/2/fo/2fo -26 / -30 / -42 -22 / -19 / -36 dBc
RF Output 5fo/2 Harmonic Doubler Mode -60 -56 dBc
RF Output 3rd Harmonic fo/2/fo/2fo -27 / -40 / -60 -23 / -32 / -51 dBc
RF Output 7fo/2 Harmonic Doubler Mode -65 -61 dBc
RF Divider Characteristics
19-Bit N-Divider Range (Integer) Max = 219 - 1 524,287
19-Bit N-Divider Range (Fractional) Fractional nominal divide ratio
varies (-3 / +4) dynamically max 524,283
REF Input Characteristics
Max Ref Input Frequency
Synthesizer phase noise can
degrade by about 5 dB when
operating with a reference
frequency near the low end of
this range.
10 50 200 MHz
Ref Input Range AC Coupled 1 2 3.3 Vpp
Ref Input Capacitance 5pF
14-Bit R-Divider Range 116,383
Electrical Specications, TA = +25° C
VPPCP, VDDCP, VCC1, VCC2 = 5V ±4%; RVDD, AVDD, DVDD3V, VCCPD, VCCHF, VCCPS =
3.3V ±6% GNDCP = GNDLS = Ground Paddle = 0V
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
3
v06.1212
Parameter Condition Min. Ty p. Max. Units
Phase Detector (PD)
PD Frequency Fractional Feedback Mode [1] 0.1 100 MHz
PD Frequency Fractional Feedforward Mode
(and Register 6 [17:16] = 10) 0.1 80 MHz
PD Frequency Integer Mode [1] 0.1 125 MHz
Charge Pump
Output Current 0.02 2.54 mA
Charge Pump Gain Step Size 20 µA
PD/Charge Pump SSB Phase Noise 50 MHz Ref, Input Referred
1 kHz -141 dBc/Hz
10 kHz Add 1 dB for Fractional -149 dBc/Hz
100 kHz Add 3 dB for Fractional -153 dBc/Hz
Logic Inputs
VIH Input High Voltage DVDD3V-0.4 DVDD3V V
VIL Input Low Voltage 0 0.4 V
Logic Outputs
VOH Output High Voltage DVDD3V-0.4 DVDD3V V
VOL Output Low Voltage 00.4 V
Power Supply Voltages
Analog 3.3V Supplies AVDD, VCCHF, VCCPS,
VCCPD, RVDD 3.0 3.3 3.5 V
Digital Supply DVDD3V 3.0 3.3 3.5 V
Analog 5V Supplies VPPCP, VDDCP, VCC1, VCC2 4.8 55.2 V
Power Supply Currents
+5V Analog Charge Pump VPPCP, VDDCP 5.3 mA
+5V VCO Core and PLL Buffer VCC2 56 mA
+5V VCO Divider and RF Buffer VCC1 36 mA
+3.3V Analog AVDD, VCCHF, VCCPS,
VCCPD, RVDD 45 mA
+3.3V Digital DVDD3V 6.5 mA
Power Down - Crystal Off Reg 01h=0,
Crystal Not Clocked 10 µA
Power Down - Crystal On, 100 MHz Reg 01h=0,
Crystal Clocked 100 MHz 10 200 µA
Power on Reset
Typical Reset Voltage on DVDD 700 mV
Min DVDD Voltage for No Reset 1.5 V
Power on Reset Delay 250 µs
HMC822LP6CE
FRACTIONAL-N PLL w/ INTEGRATED VCO
665 - 825, 1330 - 1650, 2660 - 3300 MHz
Electrical Specications (Continued)
Note 1: This maximum phase detector frequency can only be achieved if the minimum N value is respected. eg. In the case of fractional feedback
mode, the maximum PFD rate = fvco/20 or 100 MHz, whichever is less.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
4
v06.1212
Electrical Specications (Continued)
HMC822LP6CE
FRACTIONAL-N PLL w/ INTEGRATED VCO
665 - 825, 1330 - 1650, 2660 - 3300 MHz
Parameter Condition Min. Ty p. Max. Units
VCO Open Loop Phase Noise at fo/2
10 kHz Offset -95 -89 dBc/Hz
100 kHz Offset -124 -121 dBc/Hz
1 MHz Offset -148 -145 dBc/Hz
10 MHz Offset -162 dBc/Hz
100 MHz Offset -163 dBc/Hz
VCO Open Loop Phase Noise at fo
10 kHz Offset -89 -83 dBc/Hz
100 kHz Offset -118 -115 dBc/Hz
1 MHz Offset -142 -139 dBc/Hz
10 MHz Offset -162 dBc/Hz
100 MHz Offset -164 dBc/Hz
VCO Open Loop Phase Noise at 2fo
10 kHz Offset -83 -83 dBc/Hz
100 kHz Offset -112 -115 dBc/Hz
1 MHz Offset -136 -139 dBc/Hz
10 MHz Offset -155 dBc/Hz
100 MHz Offset -160 dBc/Hz
Closed Loop Phase Noise PLL + VCO at fvco/2
Integer, 25 MHz PD 1 kHz Offset -113 dBc/Hz
Integer, 25 MHz PD 10 kHz Offset -118 dBc/Hz
Integer, 25 MHz PD 100 kHz Offset -118 dBc/Hz
Fractional, 25 MHz PD 1 kHz Offset -109 dBc/Hz
Fractional, 25 MHz PD 10 kHz Offset -111 dBc/Hz
Fractional, 25 MHz PD 100 kHz Offset -116 dBc/Hz
Closed Loop Phase Noise PLL + VCO at fvco
Integer, 25 MHz PD 1 kHz Offset -107 dBc/Hz
Integer, 25 MHz PD 10 kHz Offset -112 dBc/Hz
Integer, 25 MHz PD 100 kHz Offset -112 dBc/Hz
Fractional, 25 MHz PD 1 kHz Offset -103 dBc/Hz
Fractional, 25 MHz PD 10 kHz Offset -105 dBc/Hz
Fractional, 25 MHz PD 100 kHz Offset -110 dBc/Hz
Closed Loop Phase Noise PLL + VCO at 2fo
Integer, 25 MHz PD 1 kHz Offset -101 dBc/Hz
Integer, 25 MHz PD 10 kHz Offset -106 dBc/Hz
Integer, 25 MHz PD 100 kHz Offset -106 dBc/Hz
Fractional, 25 MHz PD 1 kHz Offset -97 dBc/Hz
Fractional, 25 MHz PD 10 kHz Offset -99 dBc/Hz
Fractional, 25 MHz PD 100 kHz Offset -104 dBc/Hz
Figure of Merit Normalized 1 Hz
Integer Mode Measured w/ 50 MHz PD
at 30 kHz Offset -229 dBc/Hz
Fractional Mode Measured w/ 50 MHz PD
at 30 kHz Offset -227 dBc/Hz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
5
v06.1212
HMC822LP6CE
FRACTIONAL-N PLL w/ INTEGRATED VCO
665 - 825, 1330 - 1650, 2660 - 3300 MHz
[1] Fractional Mode, 50 MHz Crystal, R=1, ~80 kHz Loop BW, (Loop lter values: Contact factory for component values) 2mA Charge Pump, -385µA
Offset.
Free Running Phase Noise
-180
-160
-140
-120
-100
-80
-60
-40
103104105106107108
750 MHz FF
1500 MHz FF
3000 MHz FF
OFFSET FREQUENCY (Hz)
PHASE NOISE (dBc/Hz)
-180
-170
-160
-150
-140
-130
-120
-110
-100
-90
-80
800 MHz FF
1650 MHz FF
3200 MHz FF
102103104105106107108
OFFSET FREQUENCY (Hz)
PHASE NOISE (dBc/Hz)
0
1
2
3
4
5
920 960 1000 1040 1080 1120 1160
VCO FREQUENCY
TUNE VOLTAGE AFTER CALABRATION (V)
0
15
31
fmin fmax
0
10
20
30
40
50
60
012345
TUNING CAP 31, 1316 MHz AT 2V
TUNING CAP 15, 1466 MHz AT 2V
TUNING CAP 0, 1685 MHz AT 2V
TUNING VOLTAGE (V)
kvco (MHz/V)
Typical Operating Range
-180
-170
-160
-150
-140
-130
-120
-110
-100
-90
-80
851 MHz FF
1701 MHz FF
3402 MHz FF
102103104105106107108
OFFSET FREQUENCY (Hz)
PHASE NOISE (dBc/Hz)
Typical Closed Loop Fractional Phase
Noise [1]
Closed Loop Integer Phase Noise
Typical VCO Sensitivity vs. Cap @
Fo Voltage
Typical VCO Sensitivity vs. Cap @
Fo Voltage
Free Running VCO Phase Noise
Over Temperature
-170
-160
-150
-140
-130
-120
-110
+27C
+85C
-40C
1300 1350 1400 1450 1500 1550 1600 1650 1700
PHASE NOISE (dBc/Hz)
FREQUENCY (MHz)
1 MHz Offset
100 kHz Offset
10 MHz Offset
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
6
v06.1212
Figure of Merit
-15
-10
-5
0
5
10
15
20
600 700 800 9001000 2000 3000 4000
OUTPUT FREQUENCY (MHz)
OUTPUT POWER (dBm)
Divide-by-2
Fundamental
Doubler
-40C
27C
85C
-240
-230
-220
-210
-200
102103104105106
NORMALIZED PHASE NOISE (dBc/Hz)
FREQUENCY OFFSET (Hz)
FOM Floor
FOM 1/f Noise
Typ FOM vs Offset
HMC822LP6CE
FRACTIONAL-N PLL w/ INTEGRATED VCO
665 - 825, 1330 - 1650, 2660 - 3300 MHz
Typical Output Power - Narrow Band
Match
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
7
v06.1212
HMC822LP6CE
FRACTIONAL-N PLL w/ INTEGRATED VCO
665 - 825, 1330 - 1650, 2660 - 3300 MHz
Pin Descriptions
Pin Number Function Description
1AVDD DC Power Supply for analog circuitry.
2, 5, 6, 8, 9,
11 - 14, 18 - 22, 24,
26, 34, 37, 38
N/C The pins are not connected internally; however, all data shown herein
was measured with these pins connected to RF/DC ground externally.
3VPPCP Power Supply for charge pump analog section
4CP Charge Pump Output
7VDDCP Power Supply for the charge pump digital section
10 RVDD Reference Supply
15 XREFP Reference Oscillator Input
16 DVDD3V DC Power Supply for Digital (CMOS) Circuitry
17 CEN Chip Enable. Connect to logic high for normal operation.
23 VTUNE VCO Varactor. Tuning Port Input.
25 VCC2 VCO Analog Supply 2
27 VCC1 VCO Analog Supply 1
28 RF_ N [1] RF Positive Output
29 RF_P [1] RF Negative Output
30 SEN PLL Serial Port Enable (CMOS) Logic Input
31 SDI PLL Serial Port Data (CMOS) Logic Input
32 SCK PLL Serial Port Clock (CMOS) Logic Input
33 LD_SDO Lock Detect, or Serial Data, or General Purpose (CMOS) Logic Output (GPO)
35 VCCHF DC Power Supply for Analog Circuitry
36 VCCPS DC Power Supply for Analog Prescaler
39 VCCPD DC Power Supply for Phase Detector
40 BIAS
External bypass decoupling for precision bias circuits.
Note: 1.920V ±20mV reference voltage (BIAS) is generated internally and cannot
drive an external load. Must be measured with 10GΩ meter such as Agilent 34410A,
normal 10MΩ DVM will read erroneously.
[1] For doubler mode of operation, pin 28 (RF_N) and pin 29 (RF_P) outputs must be shorted together.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
8
v06.1212
Outline Drawing
Part Number Package Body Material Lead Finish MSL Rating Package Marking [1]
HMC822LP6CE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 H822
XXXX
[1] 4-Digit lot number XXXX
Package Information
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST
BE SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR
SUGGESTED PCB LAND PATTERN.
Absolute Maximum Ratings
AVDD, RVDD, DVDD3V, VCCPD,
VCCHF, VCCPS -0.3V to +3.6V
VP P C P, V D D C P, V C C 1 -0.3V to +5.5V
VCC2 -0.3V to +5.5V
Operating Temperature -40°C to +85°C
Storage Temperature -65°C to 150°C
Maximum Junction Temperature 150 °C
Thermal Resistance (RTH)
(junction to ground paddle) 9 °C/W
Reow Soldering
Peak Temperature 260°C
Time at Peak Temperature 40 sec
ESD Sensitivity (HBM) Class 1B
Stresses above those listed under Absolute Maximum
Ratings may cause permanent damage to the device.
This is a stress rating only; functional operation of the
device at these or any other conditions above those
indicated in the operational section of this specication
is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device
reliability.
HMC822LP6CE
FRACTIONAL-N PLL w/ INTEGRATED VCO
665 - 825, 1330 - 1650, 2660 - 3300 MHz
Recomended Operating Conditions
Parameter Condition Min. Typ. Max. Units
Temperature
Junction Temperature 125 °C
Ambient Temperature -40 85 °C
Supply Voltage
AVDD, RVDD, DVDD3V, VCCPD, VCCHF,
VCCPS 3.0 3.3 3.5 V
VPPCP, VDDCP, VCC1, VCC2 4.8 55.2 V
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
9
v06.1212
HMC822LP6CE
FRACTIONAL-N PLL w/ INTEGRATED VCO
665 - 825, 1330 - 1650, 2660 - 3300 MHz
The circuit board used in the application should use RF circuit design techniques. Signal lines should have
50 Ohm impedance while the package ground leads and exposed paddle should be connected directly
to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the
top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request.
Evaluation PCB Schematic
To view this Evaluation PCB Schematic please visit www.hittite.com and choose HMC822LP6CE from the
“Search by Part Number” pull down menu to view the product splash page.
Evaluation PCB, fo & fo/2 Modes
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
10
v06.1212
Item Description
J1, J2 PCB Mount SMA RF Connector
J3 Dual Row Terminal Strip
J4 - J6 Connector Header
C1, C15 - C17, C25 10 µF Capacitor, 0805 Pkg.
C2, C3, C6, C7, C11, C12,
C14, C18, C27, C43, C45 0.47 µF Capacitor, 0402 Pkg.
C4, C13 22 pF Capacitor, 0402 Pkg.
C5, C33 1000 pF Capacitor, 0402 Pkg.
C8 1.5 pF Capacitor, 0402 Pkg.
C19 - C24, C28, C30, C32, C34 0.1 µF Capacitor, 0402 Pkg.
C26 1 µF Capacitor, 0603 Pkg.
C29 47 pF Capacitor, 0402 Pkg.
C35 3300 pF Capacitor, 0402 Pkg.
C36 270 pF Capacitor, 0402 Pkg.
C37, C38 68 pF Capacitor, 0402 Pkg.
C39 - C42, C44 4.7 µF Tantalum Capacitor, 0805 Pkg
R1, R2, R5, R8, R11, R15,
R18, R19, R21, R24 0 Ohm Resistor, 0402 Pkg.
R3, R4 1 Ohm Resistor, 0402 Pkg.
R6, R7 0 Ohm Resistor, 0805 Pkg.
R12, R20, R29 51 Ohm Resistor, 0402 Pkg.
R22, R25 20 kOhm Resistor, 0402 Pkg.
R26 - R28 1k Ohm Resistor, 0402 Pkg.
L1 8.2 nH Inductor, 0402 Pkg.
L2, L3 47 nH Inductor, 0402 Pkg.
TP3, TP4 Test Point PC Compact SMT
U1 HMC822LP6CE PLL with Integrated VCO
U2 HMC860LP3E
Low Noise Quad Linear Regulator
Y1 3.3V, 50 MHz VCXO Crystal Oscillator
PCB [2] 125998 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25FR and FR4
List of Materials for
Evaluation PCB 127827, fo & fo/2 Mode [1]
HMC822LP6CE
FRACTIONAL-N PLL w/ INTEGRATED VCO
665 - 825, 1330 - 1650, 2660 - 3300 MHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
11
v06.1212
The circuit board used in the application should use RF circuit design techniques. Signal lines should have
50 Ohm impedance while the package ground leads and exposed paddle should be connected directly
to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the
top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request.
Evaluation PCB Schematic
To view this Evaluation PCB Schematic please visit www.hittite.com and choose HMC822LP6CE from the
“Search by Part Number” pull down menu to view the product splash page.
Evaluation PCB, 2xfo Mode
HMC822LP6CE
FRACTIONAL-N PLL w/ INTEGRATED VCO
665 - 825, 1330 - 1650, 2660 - 3300 MHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
12
v06.1212
List of Materials for
Evaluation PCB 128159, 2xfo Mode [1]
HMC822LP6CE
FRACTIONAL-N PLL w/ INTEGRATED VCO
665 - 825, 1330 - 1650, 2660 - 3300 MHz
Item Description
J1, J2 PCB Mount SMA RF Connector
J3 Dual Row Terminal Strip
J4 - J6 Connector Header
C1, C15 - C17, C25 10 µF Capacitor, 0805 Pkg.
C2, C3, C6, C12,
C14, C18, C27, C43, C45 0.47 µF Capacitor, 0402 Pkg.
C4, C13 22 pF Capacitor, 0402 Pkg.
C5, C33 1000 pF Capacitor, 0402 Pkg.
C7, C11 470 nF Capacitor, 0402 Pkg.
C8 8.2 pF Capacitor, 0402 Pkg.
C19 - C24, C28, C30, C32, C34 0.1 µF Capacitor, 0402 Pkg.
C26 1 µF Capacitor, 0603 Pkg.
C29 1 pF Capacitor, 0402 Pkg.
C31 0.5 pF Capacitor, 0402 Pkg.
C35 3300 pF Capacitor, 0402 Pkg.
C36 270 pF Capacitor, 0402 Pkg.
C37, C38 68 pF Capacitor, 0402 Pkg.
C39 - C42, C44 4.7 µF Tantalum Capacitor, 0805 Pkg
C46 27 pF Capacitor, 0402 Pkg.
C47 47 pF Capacitor, 0402 Pkg.
R1, R2, R8, R11, R15, R18, R19, R21, R24 0 Ohm Resistor, 0402 Pkg.
R3, R4 1 Ohm Resistor, 0402 Pkg.
R12, R20, R23, R29 51 Ohm Resistor, 0402 Pkg.
R13, R14, R30 220 kOhm Resistor, 0402 Pkg.
R22, R25 20 kOhm Resistor, 0402 Pkg.
R26 - R28 1 kOhm Resistor, 0402 Pkg.
R31 0 Ohm Resistor, 0201 Pkg.
R32, R33 0 Ohm Resistor, 0805 Pkg.
L1 10 nH Inductor, 0402 Pkg.
L2, L3 47 nH Inductor, 0402 Pkg.
L4 1.8 nH Inductor, 0402 Pkg.
TP1 - TP4 Test Point PC Compact SMT
U1 HMC822LP6CE PLL with Integrated VCO
U2 HMC860LP3E
Low Noise Quad Linear Regulator
Y1 3.3V, 50 MHz VCXO Crystal Oscillator
PCB [2] 127729 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25FR and FR4
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D