127827-HMC822LP6CE - ANALOG DEVICES

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

PLLS w/ Integrated VCO - SMt

v06.1212

HMC822LP6CE

FRACTIONAL-N PLL w/ INTEGRATED VCO

665 - 825, 1330 - 1650, 2660 - 3300 MHz

Functional Diagram

Features

• Tri-band RF Bandwidth:

665 - 825, 1330 - 1650, 2660 - 3300 MHz

• Ultra Low Phase Noise

-105 dBc/Hz in Band Typ.

• Figure of Merit (FOM) -227 dBc/Hz

• < 180 fs RMS Jitter

• 24-bit Step Size, Resolution 3 Hz typ

• Exact Frequency Mode

• Built-in Digital Self Test

• 40 Lead 6x6 mm SMT Package: 36 mm2

Typical Applications

• Cellular/4G Infrastructure

• Repeaters and Femtocells

• Communications Test Equipment

• CATV Equipment

• Phased Array Applications

• DDS Replacement

• Very High Data Rate Radios

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

PLLS w/ Integrated VCO - SMt

v06.1212

General Description

The HMC822LP6CE is a fully functioned Fractional-N Phase-Locked-Loop (PLL) with an Integrated

Voltage Controlled Oscillator (VCO). The PLL consists of an integrated low noise VCO with a

tri-band output, an autocalibration subsystem for low voltage VCO tuning, a very low noise digital Phase Detector

(PD), a precision controlled charge pump, a low noise reference path divider and a fractional divider.

The fractional PLL features an advanced delta-sigma modulator design that allows both ultra-ne step sizes and

low spurious products. The phase detector (PD) features cycle slip prevention (CSP) technology to allow fas-

ter frequency hopping times. Ultra low in-close phase noise and low spurious also allows wider loop bandwidths for

faster frequency hopping and low micro-phonics.

For theory of operation and register map refer to the “PLLs with Integrated VCOs - RF VCOs Operating Guide”. To

view the Operating Guide, please visit www.hittite.com and choose HMC822LP6CE from the “Search by Part

Number” pull down menu.

HMC822LP6CE

FRACTIONAL-N PLL w/ INTEGRATED VCO

665 - 825, 1330 - 1650, 2660 - 3300 MHz

Parameter Condition Min. Ty p. Max. Units

RF Output Characteristics

VCO Frequency at PLL Input 1330 1650 MHz

RF Output Frequency at fVCO/2 665 825 MHz

RF Output Frequency at fVCO 1330 1650 MHz

RF Output Frequency at 2fVCO 2660 3300 MHz

RF Output Power at fVCO/2 911 13 dBm

RF Output Power at fVCO 2.5 6.5 10.5 dBm

RF Output Power at 2fVCO -9 -4 1dBm

VCO Tuning Sensitivity Measured at fo, 2V 15 MHz/V

VCO Supply Pushing Measured at fo, 2V -2 1.5 MHz/V

RF Output fo/2 Harmonic Doubler Mode -22 -18 dBc

RF Output 3fo/2 Harmonic Doubler Mode -50 -41 dBc

RF Output 2nd Harmonic fo/2/fo/2fo -26 / -30 / -42 -22 / -19 / -36 dBc

RF Output 5fo/2 Harmonic Doubler Mode -60 -56 dBc

RF Output 3rd Harmonic fo/2/fo/2fo -27 / -40 / -60 -23 / -32 / -51 dBc

RF Output 7fo/2 Harmonic Doubler Mode -65 -61 dBc

RF Divider Characteristics

19-Bit N-Divider Range (Integer) Max = 219 - 1 524,287

19-Bit N-Divider Range (Fractional) Fractional nominal divide ratio

varies (-3 / +4) dynamically max 524,283

REF Input Characteristics

Max Ref Input Frequency

Synthesizer phase noise can

degrade by about 5 dB when

operating with a reference

frequency near the low end of

this range.

10 50 200 MHz

Ref Input Range AC Coupled 1 2 3.3 Vpp

Ref Input Capacitance 5pF

14-Bit R-Divider Range 116,383

Electrical Specications, TA = +25° C

VPPCP, VDDCP, VCC1, VCC2 = 5V ±4%; RVDD, AVDD, DVDD3V, VCCPD, VCCHF, VCCPS =

3.3V ±6% GNDCP = GNDLS = Ground Paddle = 0V

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

PLLS w/ Integrated VCO - SMt

v06.1212

Parameter Condition Min. Ty p. Max. Units

Phase Detector (PD)

PD Frequency Fractional Feedback Mode [1] 0.1 100 MHz

PD Frequency Fractional Feedforward Mode

(and Register 6 [17:16] = 10) 0.1 80 MHz

PD Frequency Integer Mode [1] 0.1 125 MHz

Charge Pump

Output Current 0.02 2.54 mA

Charge Pump Gain Step Size 20 µA

PD/Charge Pump SSB Phase Noise 50 MHz Ref, Input Referred

1 kHz -141 dBc/Hz

10 kHz Add 1 dB for Fractional -149 dBc/Hz

100 kHz Add 3 dB for Fractional -153 dBc/Hz

Logic Inputs

VIH Input High Voltage DVDD3V-0.4 DVDD3V V

VIL Input Low Voltage 0 0.4 V

Logic Outputs

VOH Output High Voltage DVDD3V-0.4 DVDD3V V

VOL Output Low Voltage 00.4 V

Power Supply Voltages

Analog 3.3V Supplies AVDD, VCCHF, VCCPS,

VCCPD, RVDD 3.0 3.3 3.5 V

Digital Supply DVDD3V 3.0 3.3 3.5 V

Analog 5V Supplies VPPCP, VDDCP, VCC1, VCC2 4.8 55.2 V

Power Supply Currents

+5V Analog Charge Pump VPPCP, VDDCP 5.3 mA

+5V VCO Core and PLL Buffer VCC2 56 mA

+5V VCO Divider and RF Buffer VCC1 36 mA

+3.3V Analog AVDD, VCCHF, VCCPS,

VCCPD, RVDD 45 mA

+3.3V Digital DVDD3V 6.5 mA

Power Down - Crystal Off Reg 01h=0,

Crystal Not Clocked 10 µA

Power Down - Crystal On, 100 MHz Reg 01h=0,

Crystal Clocked 100 MHz 10 200 µA

Power on Reset

Typical Reset Voltage on DVDD 700 mV

Min DVDD Voltage for No Reset 1.5 V

Power on Reset Delay 250 µs

HMC822LP6CE

FRACTIONAL-N PLL w/ INTEGRATED VCO

665 - 825, 1330 - 1650, 2660 - 3300 MHz

Electrical Specications (Continued)

Note 1: This maximum phase detector frequency can only be achieved if the minimum N value is respected. eg. In the case of fractional feedback

mode, the maximum PFD rate = fvco/20 or 100 MHz, whichever is less.

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

PLLS w/ Integrated VCO - SMt

v06.1212

Electrical Specications (Continued)

HMC822LP6CE

FRACTIONAL-N PLL w/ INTEGRATED VCO

665 - 825, 1330 - 1650, 2660 - 3300 MHz

Parameter Condition Min. Ty p. Max. Units

VCO Open Loop Phase Noise at fo/2

10 kHz Offset -95 -89 dBc/Hz

100 kHz Offset -124 -121 dBc/Hz

1 MHz Offset -148 -145 dBc/Hz

10 MHz Offset -162 dBc/Hz

100 MHz Offset -163 dBc/Hz

VCO Open Loop Phase Noise at fo

10 kHz Offset -89 -83 dBc/Hz

100 kHz Offset -118 -115 dBc/Hz

1 MHz Offset -142 -139 dBc/Hz

10 MHz Offset -162 dBc/Hz

100 MHz Offset -164 dBc/Hz

VCO Open Loop Phase Noise at 2fo

10 kHz Offset -83 -83 dBc/Hz

100 kHz Offset -112 -115 dBc/Hz

1 MHz Offset -136 -139 dBc/Hz

10 MHz Offset -155 dBc/Hz

100 MHz Offset -160 dBc/Hz

Closed Loop Phase Noise PLL + VCO at fvco/2

Integer, 25 MHz PD 1 kHz Offset -113 dBc/Hz

Integer, 25 MHz PD 10 kHz Offset -118 dBc/Hz

Integer, 25 MHz PD 100 kHz Offset -118 dBc/Hz

Fractional, 25 MHz PD 1 kHz Offset -109 dBc/Hz

Fractional, 25 MHz PD 10 kHz Offset -111 dBc/Hz

Fractional, 25 MHz PD 100 kHz Offset -116 dBc/Hz

Closed Loop Phase Noise PLL + VCO at fvco

Integer, 25 MHz PD 1 kHz Offset -107 dBc/Hz

Integer, 25 MHz PD 10 kHz Offset -112 dBc/Hz

Integer, 25 MHz PD 100 kHz Offset -112 dBc/Hz

Fractional, 25 MHz PD 1 kHz Offset -103 dBc/Hz

Fractional, 25 MHz PD 10 kHz Offset -105 dBc/Hz

Fractional, 25 MHz PD 100 kHz Offset -110 dBc/Hz

Closed Loop Phase Noise PLL + VCO at 2fo

Integer, 25 MHz PD 1 kHz Offset -101 dBc/Hz

Integer, 25 MHz PD 10 kHz Offset -106 dBc/Hz

Integer, 25 MHz PD 100 kHz Offset -106 dBc/Hz

Fractional, 25 MHz PD 1 kHz Offset -97 dBc/Hz

Fractional, 25 MHz PD 10 kHz Offset -99 dBc/Hz

Fractional, 25 MHz PD 100 kHz Offset -104 dBc/Hz

Figure of Merit Normalized 1 Hz

Integer Mode Measured w/ 50 MHz PD

at 30 kHz Offset -229 dBc/Hz

Fractional Mode Measured w/ 50 MHz PD

at 30 kHz Offset -227 dBc/Hz

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

PLLS w/ Integrated VCO - SMt

v06.1212

HMC822LP6CE

FRACTIONAL-N PLL w/ INTEGRATED VCO

665 - 825, 1330 - 1650, 2660 - 3300 MHz

[1] Fractional Mode, 50 MHz Crystal, R=1, ~80 kHz Loop BW, (Loop lter values: Contact factory for component values) 2mA Charge Pump, -385µA

Offset.

Free Running Phase Noise

-180

-160

-140

-120

-100

-80

-60

-40

103104105106107108

750 MHz FF

1500 MHz FF

3000 MHz FF

OFFSET FREQUENCY (Hz)

PHASE NOISE (dBc/Hz)

-180

-170

-160

-150

-140

-130

-120

-110

-100

-90

-80

800 MHz FF

1650 MHz FF

3200 MHz FF

102103104105106107108

OFFSET FREQUENCY (Hz)

PHASE NOISE (dBc/Hz)

920 960 1000 1040 1080 1120 1160

VCO FREQUENCY

TUNE VOLTAGE AFTER CALABRATION (V)

fmin fmax

012345

TUNING CAP 31, 1316 MHz AT 2V

TUNING CAP 15, 1466 MHz AT 2V

TUNING CAP 0, 1685 MHz AT 2V

TUNING VOLTAGE (V)

kvco (MHz/V)

Typical Operating Range

-180

-170

-160

-150

-140

-130

-120

-110

-100

-90

-80

851 MHz FF

1701 MHz FF

3402 MHz FF

102103104105106107108

OFFSET FREQUENCY (Hz)

PHASE NOISE (dBc/Hz)

Typical Closed Loop Fractional Phase

Noise [1]

Closed Loop Integer Phase Noise

Typical VCO Sensitivity vs. Cap @

Fo Voltage

Typical VCO Sensitivity vs. Cap @

Fo Voltage

Free Running VCO Phase Noise

Over Temperature

-170

-160

-150

-140

-130

-120

-110

+27C

+85C

-40C

1300 1350 1400 1450 1500 1550 1600 1650 1700

PHASE NOISE (dBc/Hz)

FREQUENCY (MHz)

1 MHz Offset

100 kHz Offset

10 MHz Offset

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

PLLS w/ Integrated VCO - SMt

v06.1212

Figure of Merit

-15

-10

-5

600 700 800 9001000 2000 3000 4000

OUTPUT FREQUENCY (MHz)

OUTPUT POWER (dBm)

Divide-by-2

Fundamental

Doubler

-40C

27C

85C

-240

-230

-220

-210

-200

102103104105106

NORMALIZED PHASE NOISE (dBc/Hz)

FREQUENCY OFFSET (Hz)

FOM Floor

FOM 1/f Noise

Typ FOM vs Offset

HMC822LP6CE

FRACTIONAL-N PLL w/ INTEGRATED VCO

665 - 825, 1330 - 1650, 2660 - 3300 MHz

Typical Output Power - Narrow Band

Match

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

PLLS w/ Integrated VCO - SMt

v06.1212

HMC822LP6CE

FRACTIONAL-N PLL w/ INTEGRATED VCO

665 - 825, 1330 - 1650, 2660 - 3300 MHz

Pin Descriptions

Pin Number Function Description

1AVDD DC Power Supply for analog circuitry.

2, 5, 6, 8, 9,

11 - 14, 18 - 22, 24,

26, 34, 37, 38

N/C The pins are not connected internally; however, all data shown herein

was measured with these pins connected to RF/DC ground externally.

3VPPCP Power Supply for charge pump analog section

4CP Charge Pump Output

7VDDCP Power Supply for the charge pump digital section

10 RVDD Reference Supply

15 XREFP Reference Oscillator Input

16 DVDD3V DC Power Supply for Digital (CMOS) Circuitry

17 CEN Chip Enable. Connect to logic high for normal operation.

23 VTUNE VCO Varactor. Tuning Port Input.

25 VCC2 VCO Analog Supply 2

27 VCC1 VCO Analog Supply 1

28 RF_ N [1] RF Positive Output

29 RF_P [1] RF Negative Output

30 SEN PLL Serial Port Enable (CMOS) Logic Input

31 SDI PLL Serial Port Data (CMOS) Logic Input

32 SCK PLL Serial Port Clock (CMOS) Logic Input

33 LD_SDO Lock Detect, or Serial Data, or General Purpose (CMOS) Logic Output (GPO)

35 VCCHF DC Power Supply for Analog Circuitry

36 VCCPS DC Power Supply for Analog Prescaler

39 VCCPD DC Power Supply for Phase Detector

40 BIAS

External bypass decoupling for precision bias circuits.

Note: 1.920V ±20mV reference voltage (BIAS) is generated internally and cannot

drive an external load. Must be measured with 10GΩ meter such as Agilent 34410A,

normal 10MΩ DVM will read erroneously.

[1] For doubler mode of operation, pin 28 (RF_N) and pin 29 (RF_P) outputs must be shorted together.

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

PLLS w/ Integrated VCO - SMt

v06.1212

Outline Drawing

Part Number Package Body Material Lead Finish MSL Rating Package Marking [1]

HMC822LP6CE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 H822

XXXX

[1] 4-Digit lot number XXXX

Package Information

NOTES:

1. LEADFRAME MATERIAL: COPPER ALLOY

2. DIMENSIONS ARE IN INCHES [MILLIMETERS].

3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE

4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.

PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.

5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.

6. ALL GROUND LEADS AND GROUND PADDLE MUST

BE SOLDERED TO PCB RF GROUND.

7. REFER TO HITTITE APPLICATION NOTE FOR

SUGGESTED PCB LAND PATTERN.

Absolute Maximum Ratings

AVDD, RVDD, DVDD3V, VCCPD,

VCCHF, VCCPS -0.3V to +3.6V

VP P C P, V D D C P, V C C 1 -0.3V to +5.5V

VCC2 -0.3V to +5.5V

Operating Temperature -40°C to +85°C

Storage Temperature -65°C to 150°C

Maximum Junction Temperature 150 °C

Thermal Resistance (RTH)

(junction to ground paddle) 9 °C/W

Reow Soldering

Peak Temperature 260°C

Time at Peak Temperature 40 sec

ESD Sensitivity (HBM) Class 1B

Stresses above those listed under Absolute Maximum

Ratings may cause permanent damage to the device.

This is a stress rating only; functional operation of the

device at these or any other conditions above those

indicated in the operational section of this specication

is not implied. Exposure to absolute maximum rating

conditions for extended periods may affect device

reliability.

HMC822LP6CE

FRACTIONAL-N PLL w/ INTEGRATED VCO

665 - 825, 1330 - 1650, 2660 - 3300 MHz

Recomended Operating Conditions

Parameter Condition Min. Typ. Max. Units

Temperature

Junction Temperature 125 °C

Ambient Temperature -40 85 °C

Supply Voltage

AVDD, RVDD, DVDD3V, VCCPD, VCCHF,

VCCPS 3.0 3.3 3.5 V

VPPCP, VDDCP, VCC1, VCC2 4.8 55.2 V

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

PLLS w/ Integrated VCO - SMt

v06.1212

HMC822LP6CE

FRACTIONAL-N PLL w/ INTEGRATED VCO

665 - 825, 1330 - 1650, 2660 - 3300 MHz

The circuit board used in the application should use RF circuit design techniques. Signal lines should have

50 Ohm impedance while the package ground leads and exposed paddle should be connected directly

to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the

top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request.

Evaluation PCB Schematic

To view this Evaluation PCB Schematic please visit www.hittite.com and choose HMC822LP6CE from the

“Search by Part Number” pull down menu to view the product splash page.

Evaluation PCB, fo & fo/2 Modes

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

PLLS w/ Integrated VCO - SMt

v06.1212

Item Description

J1, J2 PCB Mount SMA RF Connector

J3 Dual Row Terminal Strip

J4 - J6 Connector Header

C1, C15 - C17, C25 10 µF Capacitor, 0805 Pkg.

C2, C3, C6, C7, C11, C12,

C14, C18, C27, C43, C45 0.47 µF Capacitor, 0402 Pkg.

C4, C13 22 pF Capacitor, 0402 Pkg.

C5, C33 1000 pF Capacitor, 0402 Pkg.

C8 1.5 pF Capacitor, 0402 Pkg.

C19 - C24, C28, C30, C32, C34 0.1 µF Capacitor, 0402 Pkg.

C26 1 µF Capacitor, 0603 Pkg.

C29 47 pF Capacitor, 0402 Pkg.

C35 3300 pF Capacitor, 0402 Pkg.

C36 270 pF Capacitor, 0402 Pkg.

C37, C38 68 pF Capacitor, 0402 Pkg.

C39 - C42, C44 4.7 µF Tantalum Capacitor, 0805 Pkg

R1, R2, R5, R8, R11, R15,

R18, R19, R21, R24 0 Ohm Resistor, 0402 Pkg.

R3, R4 1 Ohm Resistor, 0402 Pkg.

R6, R7 0 Ohm Resistor, 0805 Pkg.

R12, R20, R29 51 Ohm Resistor, 0402 Pkg.

R22, R25 20 kOhm Resistor, 0402 Pkg.

R26 - R28 1k Ohm Resistor, 0402 Pkg.

L1 8.2 nH Inductor, 0402 Pkg.

L2, L3 47 nH Inductor, 0402 Pkg.

TP3, TP4 Test Point PC Compact SMT

U1 HMC822LP6CE PLL with Integrated VCO

U2 HMC860LP3E

Low Noise Quad Linear Regulator

Y1 3.3V, 50 MHz VCXO Crystal Oscillator

PCB [2] 125998 Evaluation Board

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: Rogers 4350 or Arlon 25FR and FR4

List of Materials for

Evaluation PCB 127827, fo & fo/2 Mode [1]

HMC822LP6CE

FRACTIONAL-N PLL w/ INTEGRATED VCO

665 - 825, 1330 - 1650, 2660 - 3300 MHz

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

PLLS w/ Integrated VCO - SMt

v06.1212

The circuit board used in the application should use RF circuit design techniques. Signal lines should have

50 Ohm impedance while the package ground leads and exposed paddle should be connected directly

to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the

top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request.

Evaluation PCB Schematic

To view this Evaluation PCB Schematic please visit www.hittite.com and choose HMC822LP6CE from the

“Search by Part Number” pull down menu to view the product splash page.

Evaluation PCB, 2xfo Mode

HMC822LP6CE

FRACTIONAL-N PLL w/ INTEGRATED VCO

665 - 825, 1330 - 1650, 2660 - 3300 MHz

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

PLLS w/ Integrated VCO - SMt

v06.1212

List of Materials for

Evaluation PCB 128159, 2xfo Mode [1]

HMC822LP6CE

FRACTIONAL-N PLL w/ INTEGRATED VCO

665 - 825, 1330 - 1650, 2660 - 3300 MHz

Item Description

J1, J2 PCB Mount SMA RF Connector

J3 Dual Row Terminal Strip

J4 - J6 Connector Header

C1, C15 - C17, C25 10 µF Capacitor, 0805 Pkg.

C2, C3, C6, C12,

C14, C18, C27, C43, C45 0.47 µF Capacitor, 0402 Pkg.

C4, C13 22 pF Capacitor, 0402 Pkg.

C5, C33 1000 pF Capacitor, 0402 Pkg.

C7, C11 470 nF Capacitor, 0402 Pkg.

C8 8.2 pF Capacitor, 0402 Pkg.

C19 - C24, C28, C30, C32, C34 0.1 µF Capacitor, 0402 Pkg.

C26 1 µF Capacitor, 0603 Pkg.

C29 1 pF Capacitor, 0402 Pkg.

C31 0.5 pF Capacitor, 0402 Pkg.

C35 3300 pF Capacitor, 0402 Pkg.

C36 270 pF Capacitor, 0402 Pkg.

C37, C38 68 pF Capacitor, 0402 Pkg.

C39 - C42, C44 4.7 µF Tantalum Capacitor, 0805 Pkg

C46 27 pF Capacitor, 0402 Pkg.

C47 47 pF Capacitor, 0402 Pkg.

R1, R2, R8, R11, R15, R18, R19, R21, R24 0 Ohm Resistor, 0402 Pkg.

R3, R4 1 Ohm Resistor, 0402 Pkg.

R12, R20, R23, R29 51 Ohm Resistor, 0402 Pkg.

R13, R14, R30 220 kOhm Resistor, 0402 Pkg.

R22, R25 20 kOhm Resistor, 0402 Pkg.

R26 - R28 1 kOhm Resistor, 0402 Pkg.

R31 0 Ohm Resistor, 0201 Pkg.

R32, R33 0 Ohm Resistor, 0805 Pkg.

L1 10 nH Inductor, 0402 Pkg.

L2, L3 47 nH Inductor, 0402 Pkg.

L4 1.8 nH Inductor, 0402 Pkg.

TP1 - TP4 Test Point PC Compact SMT

U1 HMC822LP6CE PLL with Integrated VCO

U2 HMC860LP3E

Low Noise Quad Linear Regulator

Y1 3.3V, 50 MHz VCXO Crystal Oscillator

PCB [2] 127729 Evaluation Board