DC/DC CONVERTERS 240 to 300W Intermediate Bus Converters 1
2 YEAR WARRANTY
NEW Product
All specifications are typical at nominal input, full load at 25°C ambient unless otherwise stated SPECIFICATIONS
File Name: quarter_brick_narrowibc.PDF Rev: 17 Dec 2003
•48V input with isolated 12V output
•Efficiencies up to 96%
•Open loop regulation
•Fully rated 240W @ 70ºC, 200 LFM
•Over-current protection
•Operates with no load
•Auto restart after fault condition
•Remote ON/OFF
•Parallelable
•Over-temperature protection
This series is a new, high efficiency, Quarter-Brick, isolated, Intermediate Bus Converter
series that provides up to 300 Watts of output power. The series is designed to convert
48 Volts ±10% to a loosely regulated 12 Volts at full rated load up to 25A and efficiencies
up to 96%.The 12 Volt power is a great power source for a variety of non-isolated,
point-of-load converters or embedded solutions. This converter is available in four
package types, standard quarter-brick through-hole, through-hole vertical, standard
quarter-brick surface-mount, and quarter-brick surface-mount solder ball. In addition,
this series features remote ON/OFF, no-load operation, input under-voltage protection as
well as output over-voltage and over-current protection.
International Safety Standard Approvals
UL/cUL CAN/CSA 22.2 No. 60950
UL 60950 File No. E139421
TÜV TÜV Product Service (EN60950) Certificate No. B03 04 19870213
Quarter-Brick Series
Narrow Input IBC
TÜV
OUTPUT SPECIFICATIONS
Output voltage 12V
Current share accuracy Full load 10%
Line regulation Low line to high line ±10% max.
Load regulation Full load to min. load 6% max.
Minimum load 0A
Overshoot 3.0% max.
Undershoot 200mV max.
Ripple and noise 5 to 20MHz 150mV pk-pk
(See Note 1)
Transient response Deviation <100mV
(See Note 2) <100µs recovery to
within total error band
Over-voltage setpoint 13.8V
INPUT SPECIFICATIONS
Input voltage range Nominal 48VDC ±10%VDC
Input current No load 100mA typ.
Remote OFF 2mA typ.
Input reflected ripple (See Note 3) 34mA rms
100mA pk-pk
Remote ON/OFF ON >1.7VDC
OFF <0.8VDC
Under-voltage lockout Power up 41.0V
Power down 38.6V
Start-up time Power up <50ms
(See Note 4) Power down <20ms
EMC CHARACTERISTICS
Conducted emissions EN55022 (See Note 5) Level A
EN55022 (See Note 5) Level B
Immunity:
ESD air EN61000-4-2 4kV
ESD contact EN61000-4-2 4kV
Radiated field enclosure EN61000-4-3 3V/m
Conducted (DC power) EN61000-4-6 3V
Conducted (signal) EN61000-4-6 3V
GENERAL SPECIFICATIONS
Efficiency Half load Up to 96% typ.
Insulation Input/output 2000VDC
Switching frequency Fixed 300kHz typ.
Approvals and EN60950 (TÜV Product Service)
standards (See Note 6) UL/cUL60950
Material flammability UL94V-0
Weight 56.66g (2oz)
MTBF MIL-HDBK-217F 1,000,000 hours
Representative model: 25A @ 48Vin, 40°C ambient
100% load ground benign
Telcordia SR-332 2,828,160 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance Operating ambient, 0°C to +80°C
(300LFM airflow) temperature
Non-operating -55°C to +125°C