Data sheet...
Creation date March 7, 2013 3:55:24 PM CET
Catalogue status 20.12.2012 / We reserve the right to make technical changes. 1
RS-SERIES
RS 30 48VDC LD BL/SL 1U
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
General ordering data
Order No. 1100420000
Type RS 30 48VDC LD BL/SL 1U
Version RS-SERIES, Relays, No. of contacts: 1, CO contact,
AgNi 0.15 gold flashed, Rated control voltage:
48 V DC ±10 %, Continuous current: 6 A, Screw
connection
GTIN (EAN) 4008190073244
Qty. 10 pc(s).
Clip-on RS 30. 31. 32 relay bases are available in widths
from 11.2 to 25 mm, depending on the type.
The RSM relay multiplexers are available as 4, 8 and
16-way modules. To reduce the wiring work, the DC
variants are fitted with a common plus or minus potential.
The optional IEC603-1 plug-in connector enables the
connection of pre-assembled lines.
The screw connection system is used to connect the
conductor with a rated cross-section of 2.5 mm².
Data sheet...
RS-SERIES
RS 30 48VDC LD BL/SL 1U
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date March 7, 2013 3:55:24 PM CET
Catalogue status 20.12.2012 / We reserve the right to make technical changes. 2
Ratings
Conductor connection system
Screw connection
Humidity 40 °C / 93 % rel. humidity,
no condensation
Dimensions and weights
Width 11.2 mm Height 74 mm
Depth 56 mm Net weight 34.8 g
Temperatures
Operating temperature -25 °C...+40 °C Storage temperature -40 °C...+60 °C
Connection data
Clamping range, rated connection 2.5 mm² Clamping range, rated connection, min. 0.5 mm²
Clamping range, rated connection, max. 4 mm² Stripping length, rated connection 8 mm
Input
Rated control voltage 48 V DC ±10 % Rated current DC 8 mA
Power rating
0.45 W
Pull-in (sparkover) / drop-out voltage DC
coil 51 V
Pull-in / drop-out current, DC coil 10 mA / 2 mA
Output
Max. switching voltage, AC 250 V Continuous current 6 A
making current 8 A Max. switching power 2000 VA
Switch-on delay ≤ 12 ms Switch-off delay ≤11ms
Duration of Bounce ≤ 3 ms Min. switching power 250 mW
Max. switching frequency at rated load 0.1 Hz
Contact specifications
No. of contacts 1 Contact design CO contact
Contact material AgNi 0.15 gold flashed Mechanical service life 20 x 106 switching cycles
Electrical service life of AC coil > 7x105 Switching cycles Electrical service life, DC coil > 5x105 switching cycles
Insulation coordination
Rated voltage
250 V
Clearance and creepage distances for
control side - load side > 3 mm
Impulse withstand voltage 4 kV Protection degree IP 20
Pollution severity 2 Surge voltage category III
Other technical data
Version Relay coupler Free-wheel diode Yes
Reverse polarity protection Available
Further details of approvals / standards
Standards DIN EN 50178
Data sheet...
RS-SERIES
RS 30 48VDC LD BL/SL 1U
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date March 7, 2013 3:55:24 PM CET
Catalogue status 20.12.2012 / We reserve the right to make technical changes. 3
Classifications
ETIM 2.0 EC001437 ETIM 3.0 EC001437
UNSPSC 30-21-19-17 eClass 4.1 40-02-06-14
eClass 5.1 27-37-16-01 eClass 6.0 27-37-16-01
eClass 7.0 27-37-16-01
Approvals
Approvals
Downloads
Declaration of Conformity K032_09_10.pdf