(R) Manual Swipe Magnetic Card Reader 3S4YR-HSR Economical, Manually Operated Card Reader Compact, rugged design Wide operating temperature range Stable operation with card swipe speed within a range of 10 to 150 cm/second Choose enclosed or open housing to match application Single and double track configurations TTL-compatible interface (clock & data) Ordering Information Magnetic Tracks Supported (R, R/W) 1 2 3 Center JIS II IC Contact Interface Cover Cable Color Part Number R -- -- -- -- No TTL Yes Yes Black 3S4YR-HSR3 R -- -- -- -- No TTL No Yes Black 3S4YR-HSR3-01 -- R -- -- -- No TTL Yes Yes Black 3S4YR-HSR4 -- R -- -- -- No TTL No Yes Black 3S4YR-HSR4-01 -- -- R -- -- No TTL Yes Yes Black 3S4YR-HSR5 -- -- R -- -- No TTL No Yes Black 3S4YR-HSR5-01 R R -- -- -- No TTL Yes Yes Black 3S4YR-HSR6 R R -- -- -- No TTL No Yes Black 3S4YR-HSR6-001 -- R R -- -- No TTL Yes Yes Black 3S4YR-HSR7 -- R R -- -- No TTL No Yes Black 3S4YR-HSR7-001 TYPICAL APPLICATIONS * Remote Terminals for Computers * Credit Card Readers * ID Card Checkers * Electronic Locks * Automatic Gate Machines * Point-of-Sale Systems (POS) 3S4YR-HSR 3S4YR-HSR Specifications Part number 3S4YR-HSR Recommended card type ISO 7810, 7811/1-5, 7812, 7813 Recording method FM decoding (F2F) Card feeding speed 10 to 150 cm/sec (4 to 59 in/sec) Service life Single track 300,000 passes min. Double track 600,000 passes min. Single track 25 mA Double track 50 mA Operation -10 to 55C (14 to 131F) without condensation Storage -30 to 70C (-22 to 158F) Operation 10% to 95% RH without condensation Storage 10% to 95% RH 5 VDC 10% Operating power supply Current consumption Mounting location Ambient temperature Ambient humidity Anywhere not directly subject to water or sunlight Vibration 10 to 55 Hz, 2 mm double amplitude, for 30 minutes in X, Y, and Z directions Shock 300 m/sec2 (30 G) in each of X, Y, and Z directions Dimensions With cover 100L x 32.5W x 32H mm (3.94L x 1.28W x 1.26H in) Without cover Weight 100L x 27W x 29.5H mm (3.94L x 1.06W x 1.16H in) Approx. 90 g (3.2 oz) enclosed; 60 g (2.1 oz) open Engineering Data OUTPUT CIRCUIT DIAGRAM VCC Output signal levels: IOL Output high current VCC = 5.5 V I OH = 200 A max. Output sink current VOL = 0.4 V I OL = 16 mA max. Max. 16. mA Ground 2 3S4YR-HSR 3S4YR-HSR I/O INFORMATION Single Track Connector Double Track Connector 5-pin JAE connector part number IL-5S-S3L-N. Shipped with JAE angle pin header, part number IL-5P-S3FP2-N attached. 9-pin JAE connector part number IL-9S-S3L-N. Shipped with JAE angle pin header, part number IL-9P-S3FP2-N attached. Pin # Signal Input/Output Description Pin # Signal Input/Output Description 1 RDP Output Read data 1 RDP1 Output Read data, track 1 or 3 2 RCP Output Read clock 2 RCP1 Output Read clock, track 1 or 3 3 CLS Output Card load 3 CLS1 Output Card load, track 1 or 3 4 DC5 -- +5 VDC 4 RDP2 Output Read data, track 2 5 GND -- Ground 5 RCP2 Output Read clock, track 2 6 CLS2 Output Card load, track 2 7 -- -- Not used, no connection 8 DC5 -- +5 VDC 9 GND -- Ground Dimensions Unit: mm (inch) 3S4YR-HSR OPEN MODELS 3S4YR-HSR ENCLOSED MODELS 29.5 (1.16) 32 (1.26) 7 (0.28) 7 (0.28) Connector Connector Wire length 250 20 (9.84 0.79) 100 (3.94) 100 (3.94) 3 (0.12) 1.2 (0.05) 1.2 (0.05) 27 (1.06) 32.5 (1.28) 17 (0.67) 17 (0.67) Magnetic head 92 (3.62) 2 (0.08) 8 (0.31) 4 (0.16) Two M3 x 5 mounting holes Two M3 x 5 mounting holes 16 (0.63) 16 (0.63) Two 1.9 (0.07) dia. holes 8.25 (0.32) Wire length 250 20 (9.84 0.79) 92 (3.62) 5.5 (0.22) 4 (0.16) Connector Note: Unless otherwise specified, tolerance is 0.3. 3 3S4YR-HSR 3S4YR-HSR NOTE: DIMENSIONS ARE IN MILLIMETERS. To convert millimeters to inches, divide by 25.4 OMRON ELECTRONICS, INC. OMRON CANADA, INC. One East Commerce Drive Schaumburg, IL 60173 885 Milner Avenue Scarborough, Ontario M1B5V8 1-800-55-OMRON 416-286-6465 Cat. No. GC CR3 7/00 Specifications subject to change without notice. 18 Printed in U.S.A.