ES4810 Digital Audio Processor Product Brief PRELIMINARY ESS Technology, Inc. DESCRIPTION FEATURES The ES4810 Digital Audio Processor (DAPTM3) is an SOC chip designed for Audio Boom-Box and Mini-Combo applications. It integrates a servo controller, RF amplifier, servo DSP, MP3 and WMA decoders, USB 2.0 Driver, 2 channels audio DAC, 2 channels of audio ADC for Karaoke, SD/MS/MMC card reader and MP3 encoder. The ES4810 has the largest feature set and is the most highly integrated and cost-effective solution currently available. * CD Optical loader with integrated servo controller and RF amplifier. * Disc format supports CD-R/RW, CD. * File system supports ISO9660, UDF, NTFS, and FAT32. * Audio DSP decodes MP3, WMA, AAC, and OGG. Can also encode MP3 and store into USB flash or memory cards. * * * * * * * * * * The ES4810 provides auxiliary control pins for AM/FM tuner control, LCD driver and system management. The ES4810's internal RISC processor can be used in place of a microcontroller to provide all system controls and user interface. The ES4810 digital audio processor is available in a 208pin Plastic Quad Flat Pack (PQFP) device package. USB 2.0 FS to support USB flash drive for music playback. Digital audio SPDIF In and Out. VDAC for file browsing and management. 2-channel audio DAC, 2-channel ADC. 2-channel PWM supports class D digital amplifiers. SD/MMC/MS card reader interface. Audio equalizer and bass enhancement support. LCD panel control and FM/AM tuner control. Serial UART port. 1.5V power supply with 3.3V tolerant I/Os, power consumption < 1W. * Lead-free leads. SYSTEM BLOCK DIAGRAM A sample system block diagram for the ES4810 digital audio board design is shown in Figure 1. CD/CD-R/CD-RW for MP3 Encode Sony 213C Samsung B35 Sanyo DA11 FM/AM Tuner ADC Motor CPU Motor Driver UART MCU SDRAM (2 MB) 4 Mbit ROM/FLASH System Control LCD Driver LCD Panel IR Remote ES4810 DAP3 S/PDIF Audio Audio A/V Receiver Audio Output Microphone Input USB 2.0 Flash Memory Cards - SD/MMC/MS Figure 1 ES4810 System Block Diagram ESS Technology, Inc. SAM0646-080406 1 PRELIMINARY ES4810 PRODUCT BRIEF ORDERING INFORMATION ORDERING INFORMATION Part Number Description Package ES4810FAA Digital Audio Processor 208-pin PQFP ES4810SAA Digital Audio Processor with extended temperature range for automotive applications 208-pin LQFP The first letter F in the part number identifies the package type PQFP. The first letter S in the part number identifies the package type LQFP. No part of this publication may be reproduced, stored in a retrieval system, transmitted, or translated in any form or by any means, electronic, mechanical, manual, optical, or otherwise, without the prior written permission of ESS Technology, Inc. ESS Technology, Inc. 48401 Fremont Blvd. Fremont, CA 94538 Tel: (510) 492-1088 Fax: (510) 492-1898 2 http://www.esstech.com ESS Technology, Inc. makes no representations or warranties regarding the content of this document. All specifications are subject to change without prior notice. ESS Technology, Inc. assumes no responsibility for any errors contained herein. U.S. patents pending. (c) 2006 ESS Technology, Inc. MPEG is the Moving Picture Experts Group of the ISO/IEC. References to MPEG in this document refer to the ISO/IEC JTC1 SC29 committee draft ISO 11172 dated January 9, 1992. Vibratto, SmartBright, SmartLogo, SmartColor, and Music Slideshow are trademarks of ESS Technology, Inc. Dolby is a trademark of Dolby Laboratories, Inc. Trusurround, Trusurround XT, SRS, and (o) symbol are trademarks of SRS Labs., Inc. All other trademarks are trademarks of their respective companies and are used for identification purposes only. SAM0646-080406