Features
Wide current range
High voltage ratings up to 3200V
High surge current capabilities
Stud cathode and stud anode version
Standard JEDEC types
Typical Applications
Converters
Power supplies
Machine tool controls
High power drives
Medium traction applications
Parameters Units
SD600N/R
04 to 20 22 to 32
IF(AV) 600 600 A
@ TC92 54 °C
IF(RMS) 940 940 A
IFSM @ 50Hz 13000 10500 A
@ 60Hz 13600 11000 A
I2t@
50Hz 845 551 KA2s
@ 60Hz 772 503 KA2s
VRRM range 400 to 2000 2200 to 3200 V
TJ- 40 to 180 - 40 to 150 °C
Major Ratings and Characteristics
case style
B-8
SD600N/R SERIES
STANDARD RECOVERY DIODES
600A
1
Stud Version
Bulletin I2070 rev. C 03/03
www.irf.com
SD600N/R Series
2
Bulletin I2070 rev. C 03/03
www.irf.com
SD600N/R 35
Voltage VRRM , maximum repetitive VRSM , maximum non- IRRM max.
Type number Code peak reverse voltage repetitive peak rev. voltage @ TJ = TJ max.
VVmA
04 400 500
08 800 900
12 1200 1300
16 1600 1700
20 2000 2100
22 2200 2300
28 2800 2900
32 3200 3300
ELECTRICAL SPECIFICATIONS
Voltage Ratings
IF(AV) Max. average forward current 600 600 A 180° conduction, half sine wave
@ Case temperature 92 54 °C
IF(AV) Max. average forward current 570 375 A 180° conduction, half sine wave
@ Case temperature 100 100 °C
IF(RMS) Max. RMS forward current 940 940 A DC @ TC = 75°C (04 to 20), TC = 36°C (25 to 32)
IFSM Max. peak, one-cycle forward, 13000 10500 t = 10ms No voltage
non-repetitive surge current 13600 11000 t = 8.3ms reapplied
10900 8830 t = 10ms 100% VRRM
11450 9250 t = 8.3ms reapplied Sinusoidal half wave,
I2t Maximum I2t for fusing 845 551 t = 10ms No voltage Initial TJ = TJ max.
772 503 t = 8.3ms reapplied
598 3 9 0 t = 10ms 100% VRRM
546 356 t = 8.3ms reapplied
I2√t Maximum I2√t for fusing 8450 5510 KA2√s t = 0.1 to 10ms, no voltage reapplied
VF(TO)1 Low level value of threshold
voltage
VF(TO)2 High level value of threshold
voltage
rf1Low level value of forward
slope resistance
rf2High level value of forward
slope resistance
VFM Max. forward voltage drop 1.31 1.44 V Ipk= 1500A, TJ = TJ max, tp = 10ms sinusoidal wave
SD600N/R
04 to 20 22 to 32
Parameter Units Conditions
0.31 0.38 (I > π x IF(AV)),TJ = TJ max.
0.35 0.40 (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max.
mΩ
0.87 0.88 (I > π x IF(AV)),TJ = TJ max.
0.78 0.84 (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max.
V
KA2s
A
Forward Conduction
SD600N/R Series
Bulletin I2070 rev. C 03/03
www.irf.com 3
Parameter Units Conditions
SD600N/R
04 to 20 22 to 32
TJMax. junction operating temperature range -40 to 180 -40 to 150
Tstg Max. storage temperature range -55 to 200 -55 to 200
RthJC Max. thermal resistance, junction to case 0.1 DC operation
RthCS Max. thermal resistance, case Mounting surface, smooth, flat and
to heatsink greased
T Max. allowed mounting torque ±10% 50 Nm Not lubricated threads
wt Approximate weight 454 g
Case style B - 8 See Outline Table
°C
0.04 K/W
Thermal and Mechanical Specifications
180° 0.012 0.008
120° 0.014 0.014
90° 0.017 0.019 K/W TJ = TJ max.
60° 0.025 0.026
30° 0.042 0.042
Conduction angle Sinusoidal conduction Rectangular conduction Units Conditions
∆RthJC Conduction
(The following table shows the increment of thermal resistence RthJC when devices operate at different conduction angles than DC)
Ordering Information Table
1 2 346
Device Code SD 60 0 N 32 P C
1- Diode
2- Essential part number
3- 0 = Standard recovery
4- N = Stud Normal Polarity (Cathode to Stud)
R = Stud Reverse Polarity (Anode to Stud)
5- Voltage code: Code x 100 = VRRM (See Voltage Ratings table)
6-P = Stud base B-8 3/4" 16UNF-2A
7- C = ceramic cap
NOTE: For Metric Device M24 x 1.5 Contact Factory
7
5
SD600N/R Series
4
Bulletin I2070 rev. C 03/03
www.irf.com
Outlines Table
Case Style B-8
All dimensions in millimeters (inches)
26 (1.023) MAX.
10.5 (0.41) DIA.
12 (0.47) MIN.
47 (1. 85)
27.5 (1.08) 115 (4.52)
MIN.
38 (1.5)
DIA. MAX.
245 (9.6 45)
255 (10.04)
MAX.
MAX.
CERAMIC HOUSING
SW 45
C.S. 70mm
5(0.20) ± 0.3(0.01)
2
80 (3.15) MAX.
21 (0.83) M AX.
3/4"-16UNF-2A *
Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics
70
80
90
100
110
120
130
140
150
160
170
180
0 200 400 600 800 1000
30° 60°90°
180° DC
120°
A verage Forward Curr e n t (A )
Conducti on Peri od
Maxim um Allo wable Case Te mperat u re (°C)
R (DC) = 0.1 K/W
thJC
SD600N/R Series (400V to 2000V)
80
90
100
110
120
130
140
150
160
170
180
0 100 200 300 400 500 600 700
30° 60° 90° 120°180°
A verage Forward Curren t ( A)
Conduction Angle
M aximum Allowabl e Case Temper ature (° C)
R (DC) = 0 .1 K/W
thJC
SD600N/R Series (400V to 2000V)
* FOR METRIC DEVICE: M24 X 1.5 - LENGHT 21 (0.83) MAX.
CONTACT FACTORY
SD600N/R Series
Bulletin I2070 rev. C 03/03
www.irf.com 5
20 40 60 80 100 120 140 160 180
M aximu m All owabl e A mbient Tem pe ratu re (°C)
1 K/W
R = 0.02 K/W - Delta R
thS
A
0.04 K/W
0.08 K/W
0.1 K/W
0.2 K/W
0.4 K/W
0.6 K/W
1.8 K/W
0
100
200
300
400
500
600
700
800
0 100 200 300 400 500 600
180°
120°
90°
60°
30° RMS Lim it
Conduction Angle
Max imum Aver age Forwar d Power Loss (W)
A v erage Forward Cu rrent (A)
SD600N/R Series
(400V to 2000V)
T = 180°C
J
Fig. 5 - Forward Power Loss Characteristics
50
60
70
80
90
100
110
120
130
140
150
0 100 200 300 400 500 600 700
30° 60° 90° 120° 180°
Av erage Forward Current ( A)
Conduction Angle
M aximum All owable Case Temperature (° C)
SD600N/R Series (2500V to 3200V)
R (DC) = 0 .1 K/W
thJC
30
40
50
60
70
80
90
100
110
120
130
140
150
0 200 400 600 800 1000
30° 60° 90°
180° DC
120°
Av erage Fo rward C urren t (A )
Conduction Per i od
M aximum A l lowabl e Case Temper atu re (° C)
SD600N/R Series (2500V to 3200V)
R (DC) = 0.1 K/W
thJC
Fig. 3 - Current Ratings Characteristics Fig. 4 - Current Ratings Characteristics
20 40 60 80 100 120 140 160 180
Maxi mu m Allowabl e A mbi en t Temperature (° C )
1 K/W
R = 0.02 K/W - Delta R
thSA
0.04 K/W
0.08 K/W
0.1 K/W
0.2 K/W
0.4 K/W
0.6 K/W
1.8 K/W
0
100
200
300
400
500
600
700
800
900
1000
1100
0 200 400 600 800 1000
DC
180°
120°
90°
60°
30°
RMS Lim it
Conduction Period
Ma ximum Av er age Forward Pow e r Lo ss (W)
A verage Forward C urrent ( A)
SD600N/R Series
(400V to 2000V)
T = 180°C
J
Fig. 6 - Forward Power Loss Characteristics
SD600N/R Series
6
Bulletin I2070 rev. C 03/03
www.irf.com
2000
4000
6000
8000
10000
12000
110100
Number Of Equal Ampl i tu de Hal f Cycl e Current Pul ses (N)
Peak Half Sine Wav e Forward C urren t (A )
At Any Rated Load Condi tion And W ith
Rated V Applied Following Surge.
RRM
Initial T = 180°C
@ 60 Hz 0.0083 s
@ 50 Hz 0.0100 s
J
SD600N/ R Series
(400V to 2000V)
2000
4000
6000
8000
10000
12000
14000
0.01 0.1 1
Pulse Tr ain D u rati on (s)
Peak Half Sine W ave For ward Current (A)
M aximum Non Repetitiv e Su rge Curr e n t
V er sus Pulse Tr ai n Duration.
I nitial T = 180 °C
No Voltage Reapplied
Rated V Reapplied
RRM
J
SD600N/R Series
(400V to 2000V)
Fig. 9 - Maximum Non-Repetitive Surge Current Fig. 10 - Maximum Non-Repetitive Surge Current
25 50 75 100 125 150
Maxi mum A ll o wable Am bient Te mperatu re (°C)
1 K/W
R = 0.02 K/W - Delta R
thSA
0.04 K/W
0.06 K/W
0.1 K/W
0.2 K/W
0.4 K/W
0
100
200
300
400
500
600
700
800
900
0 100 200 300 400 500 600
180°
120°
90°
60°
30° RMS Lim it
Conduction Angle
Max imu m Av erage For ward Power Loss (W )
Average For ward Cu rr en t (A )
SD600N/ R Se ri e s
(2500V to 3200V)
T = 150°C
J
25 50 75 100 125 150
Maxi mum Allowabl e A mbient Temperatu re (°C)
1 K/W
R = 0.02 K/W - Delta R
thS
A
0.04 K/W
0.06 K/W
0.1 K/W
0.2 K/W
0.4 K/W
0
100
200
300
400
500
600
700
800
900
1000
1100
0 100 200 300 400 500 600 700 800 900
DC
180°
120°
90°
60°
30°
RMS Limit
Conduction Per i od
Maximum Aver age Forwar d Power Loss (W )
Average For ward Curr en t (A )
SD600N/R Series
(2500V to 3200V)
T = 150°C
J
Fig. 7 - Forward Power Loss Characteristics
Fig. 8 - Forward Power Loss Characteristics
SD600N/R Series
Bulletin I2070 rev. C 03/03
www.irf.com 7
2000
4000
6000
8000
10000
1 10 100
Number Of Equ al Ampli tude Hal f Cy cle Curr ent Pul ses (N)
Peak Hal f Sine Wav e Forward Curren t (A )
Initial T = 150°C
@ 60 Hz 0.0083 s
@ 50 Hz 0.0100 s
J
SD600N/ R Series
(2500V to 3200V)
A t A ny Rated Lo ad C o n dition An d With
Rat ed V A pplied Following Surge.
RRM
2000
4000
6000
8000
10000
12000
0.01 0.1 1
Pulse Tr ai n D u ration (s)
Peak Half Sine Wave Forward Curr ent (A)
Initial T = 150 °C
No Voltage Reapplied
Rated V Reapplied
J
RRM
Versus P ulse Train Duration.
SD600N/R Series
(2500V to 3200V)
Maxi mum N o n Repeti tive Surge Cu rr en t
100
1000
10000
01234
T = 25°C
J
Instantan e o us Fo rward Voltage (V)
In stan tan e o us Forward C urren t ( A)
T = 180°C
J
SD600N/ R Series
(400V to 2000V)
100
1000
10000
012345
T = 25°C
J
Instan t an e o us Fo rward Voltage (V )
Instan t ane o us Forwar d C urrent ( A)
T = 150°C
J
SD600N/ R Series
(2500V to 3200V)
Fig. 13 - Forward Voltage Drop Characteristics Fig. 14 - Forward Voltage Drop Characteristics
Fig. 11 - Maximum Non-Repetitive Surge Current Fig. 12 - Maximum Non-Repetitive Surge Current
Fig. 15 - Thermal Impedance ZthJC Characteristics
0.001
0.01
0.1
1
0.001 0.01 0.1 1 10
Square Wave Pulse Duration (s )
thJC
Tran sien t Therm al Impe dance Z ( K/W)
Steady State Valu e :
R = 0 .1 K/W
(D C Oper ati on)
thJC
SD600N/R Series
SD600N/R Series
8
Bulletin I2070 rev. C 03/03
www.irf.com
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7309
Visit us at www.irf.com for sales contact information. 03/03
Data and specifications subject to change without notice.
This product has been designed and qualified for Industrial Level.
Qualification Standards can be found on IR's Web site.
