Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC423MS8 / 423MS8E v02.0705 MIXERS - DBL-BAL - SMT 9 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.6 - 1.3 GHz Typical Applications Features The HMC423MS8 / HMC423MS8E is ideal for: Integrated LO Amplifier w/ Pdiss <50 mW * Base Stations Conversion Loss / Noise Figure: 8 dB * Portable Wireless Low LO Drive: 0 dBm * CATV/DBS Input IP3: +15 dBm * ISM Single Positive Supply: 3V, 15 mA Functional Diagram General Description The HMC423MS8 & HMC423MS8E are double balanced mixer ICs with integrated LO amplifiers. This mixer can operate as an upconverter or downconverter between 0.6 GHz and 1.3 GHz. With the integrated LO amplifier, the mixer requires an LO drive level of only 0 dBm, and requires only 15mA from a single positive +3V rail. The mixer has 8 dB of conversion loss, an input P1dB of +8 dBm and an input third order intercept point of +15 dBm at 1.3 GHz. Electrical Specifi cations, TA = +25 C IF = 100 MHz LO = 0 dBm, Vdd = 3V Parameter Min. Typ. Units Max. Frequency Range, RF & LO 0.6 - 1.3 GHz Frequency Range, IF DC - 0.4 GHz Conversion Loss 8 11 Noise Figure (SSB) 8 11 dB LO to RF Isolation 25 35 dB LO to IF Isolation 15 25 dB RF to IF Isolation 12 20 dB IP3 (Input) 13 15 dBm 1 dB Compression (Idd) 6.5 8 dBm 15 mA Supply Current (Idd) * Unless otherwise noted, all measurements performed as downconverter, IF= 100 MHz. 9 - 278 dB For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC423MS8 / 423MS8E v02.0705 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.6 - 1.3 GHz Conversion Gain vs. Temperature @ LO = 0 dBm Isolation @ LO = 0 dBm 0 RF/IF LO/RF LO/IF -10 -5 ISOLATION (dB) -10 +25 C -40 C +85 C -15 -20 0.4 0.6 0.8 1 1.2 -20 9 -30 -40 1.4 -50 0.4 1.6 0.6 0.8 Conversion Gain vs. LO Drive 1.2 1.6 0 LO RF -5 RETURN LOSS (dB) -5 -10 -4 dBm -2 dBm 0 dBm +2 dBm +4 dBm -15 -20 0.4 1.4 Return Loss @ LO = 0 dBm 0 CONVERSION GAIN (dB) 1 FREQUENCY (GHz) FREQUENCY (GHz) 0.6 0.8 1 -10 -15 -20 1.2 1.4 -25 0.5 1.6 1 FREQUENCY (GHz) 1.5 MIXERS - DBL-BAL - SMT CONVERSION GAIN (dB) 0 2 FREQUENCY (GHz) Conversion Gain vs. Vdd @ LO = 0 dBm IF Bandwidth @ LO = 0 dBm 0 0 RESPONSE (dB) CONVERSION GAIN (dB) -5 -5 -10 +2.7V +3.0V +3.3V +5.0V -15 -20 0.4 -10 -15 -20 CONVERSION GAIN RETURN LOSS -25 -30 0.6 0.8 1 1.2 FREQUENCY (GHz) 1.4 1.6 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 279 HMC423MS8 / 423MS8E v02.0705 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.6 - 1.3 GHz Upconverter Performance Conversion Gain @ LO = 0 dBm Input P1dB vs. Temperature @ LO = 0 dBm 15 0 13 +25 C -40 C +85 C -5 INPUT P1dB (dBm) 9 CONVERSION GAIN (dB) 14 -10 -15 12 11 10 9 8 7 0.6 0.8 1 1.2 1.4 5 0.6 1.6 0.8 1 20 18 18 INPUT IP3 (dBm) 20 16 14 10 0.6 LO = -2 dBm LO = 0 dBm LO = +2 dBm 0.7 0.8 0.9 1.4 16 14 +25 C -40 C +85 C 12 1 1.1 1.2 1.3 10 0.6 0.7 FREQUENCY (GHz) 0.8 0.9 0 1 2 0 XX 5 1 12 0 2 70 61 3 >92 89 87 4 >92 >92 >92 1.1 1.2 1.3 Harmonics of LO nLO mRF 1 FREQUENCY (GHz) MxN Spurious @ IF Port nLO Spur @ RF Port 3 4 LO Freq. (GHz) 1 2 25 27 31 45 26 0.7 30 57 0.85 34 70 49 78 1 73 77 >92 >92 RF = 1.0 GHz @ -10 dBm LO = 0.9 GHz @ 0 dBm All values in dBc relative to the IF. Measured as downconverter. 3 4 15 42 40 16 50 42 38 19 48 52 1.15 40 22 54 58 1.3 42 26 44 59 1.45 39 31 50 60 LO = 0 dBm All values in dBc below input LO level @ RF port. * Two-tone input power = 0 dBm each tone, 1 MHz spacing. 9 - 280 1.6 Input IP3 vs. Temperature @ LO = 0 dBm* Input IP3 vs. LO Drive* 12 1.2 FREQUENCY (GHz) FREQUENCY (GHz) INPUT IP3 (dBm) MIXERS - DBL-BAL - SMT 6 -20 0.4 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC423MS8 / 423MS8E v02.0705 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.6 - 1.3 GHz Absolute Maximum Ratings +13 dBm LO Drive (Vdd = +3V) +13 dBm Vdd +7 Vdc IF DC Current 18 mA Channel Temperature (Tc) 150 C Continuous Pdiss (T = 85C) (Derate 4.8 mW/C above 85 C) 0.32 W Storage Temperature -65 to +150 C Operating Temperature -40 to +85 C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 9 MIXERS - DBL-BAL - SMT RF / IF Input (Vdd = +3V) Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC423MS8 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC423MS8E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H423 XXXX [2] H423 XXXX [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 281 HMC423MS8 / 423MS8E v02.0705 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.6 - 1.3 GHz Pin Description MIXERS - DBL-BAL - SMT 9 Pin Number Function Description 1 LO This pin is AC coupled and matched to 50 Ohm from 0.6 - 1.3 GHz. 2, 3, 6, 7 GND Pins must connect to RF ground. 4 Vdd Power supply for the LO Amplifier. One external RF bypass capacitor (10,000 pF) is required. 5 IF This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source/sink more than 18 mA of current or die nonfunction and possible die failure will result. 8 RF This pin is DC coupled and matched to 50 Ohm from 0.6 - 1.3 GHz Interface Schematic Application Circuit 9 - 282 C1 10,000 pF L1 4.7 nH For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC423MS8 / 423MS8E v02.0705 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.6 - 1.3 GHz Evaluation PCB MIXERS - DBL-BAL - SMT 9 List of Materials for Evaluation PCB 105190 [1] Item Description J1 - J3 PCB Mount SMA Connector, Johnson J4, J5 DC Pin C1 10k pF Chip Capacitor, 0603 Pkg. L1 4.7 nH Inductor, 0805 Pkg. U1 HMC423MS8 / HMC423MS8E Mixer PCB [2] 104964 Evaluation Board, 1.00" x 1.00" [1] Reference this number when ordering complete evaluation PCB The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [2] Circuit Board Material: Rogers 4350 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 283 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: HMC423MS8E 105190-HMC423MS8 HMC423MS8 HMC423MS8ETR HMC423MS8TR