10129127 - JDS Uniphase - Datasheet.Live

COMMUNICATIONS MODULES & SUBSYSTEMS

Key Features • Protocol and data rate independent – including

10 G/OC-192 applications

• Simple-to-install, rugged, plug-and-play module

• Deployable in central office and customer premise locations

• Front panel switch allows configuration as a booster, an

inline, or a pre-amplifier

• Typical 14 dBm saturated output power; 26 dB small

signal gain; 6 dB noise figure

The WaveReady™ 3000 series BrightAmp configurable single-channel optical

amplifier is designed to provide simple and economical C-band optical

amplification for single-channel applications, in a flexible and ready-to-use

package. This erbium-doped fiber amplifier (EDFA) is network-ready and

includes a switch on the front panel that enables field personnel to install and

configure the module in seconds as a booster or inline/pre-amplifier.

Front panel LEDs indicate module status, while integrated electronics provide

simple alarm and control functionality. An RS-232 interface and Ethernet port

(through a communications module) allow for remote management.

A flexible package design allows the module to be deployed in either the

WaveReady 3500 or 3100 systems which mount onto 19- or 23-inch

telecommunications racks.

Applications

• Single-channel optical amplification

• Reach extension

Compliance

• NEBS 3 compliant

• GR-1312 compliant

• FDA Class 1M laser device

• FCC Class A device

• UL 60950 Third Edition

Metro-Access Single Channel Erbium Doped Fiber Amplifier

BrightAmp

NORTH AMERICA:800 498-JDSU (5378) WEBSITE:www.jdsu.comWORLDWIDE:+800 5378-JDSU

METRO-ACCESS SINGLE CHANNEL

ERBIUM DOPED FIBER AMPLIFIER

Reach Extension

Performance Specifications1

Parameter Minimum Typical Maximum

Optical Characteristics

Operating wavelength range 1530 nm - 1560 nm

Return loss -40 dB -45 dB -

Booster Optical Characteristics

Output power (-8 dBm < Pin < 3 dBm) 13 dBm 14 dBm 17 dBm

Output power stability over temperature and lifetime - - 0.5 dB

Pre/Inline Amplifier Optical Characteristics

Maximum output power (including Amplified 11 dBm - - 11 dBm

Spontaneous Emission) at input of -30 to -8 dBm

Gain (input -30 ≤Pin ≤-26 dBm)225 dB 26 dB -

Polarization ratio (E-vector is vertical) >100:1 - -

Noise figure (Pin ≤-15 dBm)2- 6 dB 6.5 dB

Electrical Characteristics

DC supply voltage - -48 V -

Alarm relay signals - Dry contact -

Physical Dimensions

Size (H x W x L) - 6.8 x 1.0 x 8.8 inches -

(17.27 x 2.54 x 22.35 cm)

Weight - 1.5 lbs (0.68 kg) -

Environmental Characteristics

Operating ambient temperature -5°C - 55°C

Storage temperature -40°C - 85°C

Relative humidity (non-condensing) 5 % - 95 %

Note: This product should be deployed in accordance with your company’s deployment directives.

1. Unless otherwise noted, all specifications are guaranteed over the life, operating temperatures, wavelength range, and input voltage range specified.

2. BrightAmp can be used over the wavelength range of 1530 to 1565 nm. The performance specifications remain the same except for the following:

Gain (input -30 ≤Pin ≤-26 dBm): 22 dB (Minimum), 23 dB (Typical)

Noise figure (Pin ≤-15 dBm): 6 dB (Typical), 7 dB (Maximum)

Customer

Equipment

Customer

Equipment

Tx Rx

SMF

1530 to 1565 nm

13 to 17 dBm

SMF

1530 to 1565 nm

-8 to 3 dBm

Customer

Equipment

Customer

Equipment

Tx Rx

SMF

1530 to 1565 nm

Small signal gain of more than 26 dB

and output power limit of 11 dBm

SMF

1530 to 1565 nm

-30 to -8 dBm

METRO-ACCESS SINGLE CHANNEL

ERBIUM DOPED FIBER AMPLIFIER

NORTH AMERICA:800 498-JDSU (5378) WEBSITE:www.jdsu.comWORLDWIDE:+800 5378-JDSU

All statements, technical information and recommendations related to the products herein are based upon information believed to be

reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any

inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves

the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, including

withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products

herein are free from any intellectual property claims of others. Please contact JDSU for more information. BrightSwitch, FiberShelf,

JDSU and the JDSU logo are trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders.

Ordering Information

For more information on this or other products and their availability, please contact your local JDSU account manager or

JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at

customer.service@jdsu.com.

Sample: 10129127 Associated Parts

Interface Specifications

Parameter Specification

Optical (physical) SC/PC bulkheads. SMF on input A and output B

Electrical (physical) 96-pin connector (power, alarms, craft)

Craft Menu and TL1 interfaces. Accessibility to craft interfaces depends on the mounting solution

Alarms Relay, dry contact, MAJ (major; unit fail and LOS), MIN (minor; pump current threshold).

Relay closed when alarm is active

Front panel LEDs Power (CARD); Major Alarm (MAJ); Minor Alarm (MIN); Loss of input signal (LOS A)

Front panel configuration switch 2 positions (booster-amp and inline/pre-amp)

Product Code Description

10129127 BrightAmp Configurable Single-Channel Optical Amplifier

Product Code Description

10129126 DenseMount Shelf

10132805 COMM Module

Safety Information

The BrightAmp is an FDA Class 1M Laser Product and requires no special eye safety precautions.

CLASS 1M

LASER PRODUCT