ATC 700 B Series NPO Porcelain and Ceramic Multilayer Capacitors * Case B Size (.110" x .110") * Capacitance Range 0.1 pF to 5100 pF * Low ESR/ESL * Zero TCC * Low Noise * High Self-Resonance * Rugged Construction * Established Reliability (QPL) * Available with Encapsulation Option* ATC, the industry leader, is announcing new improved ESR/ESL performance for the 700 B Series RF/Microwave Capacitors. The superior high self-resonance and zero TCC characteristic of this Series provide excellent performance over a broad range of RF and microwave applications requiring minimum drift, including RF power. Porcelain and ceramic construction provide a rugged, hermetic package. ATC offers an encapsulation option for applications requiring extended protection against arc-over and corona. Typical functional applications: Bypass, Coupling, Tuning and DC Blocking. ELECTRICAL AND MECHANICAL SPECIFICATIONS QUALITY FACTOR (Q): Greater than 10,000 (0.1 pF to 200 pF) @ 1 MHz. Greater than 2000 (220 pF to 1000 pF) @ 1 MHz. Greater than 2000 (1100 pF to 5100 pF) @ 1 KHz. TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC): 0 30 PPM/C (-55C to +125C) INSULATION RESISTANCE (IR): 0.1 pF to 470 pF: 106 Megohms min. @ +25C at rated WVDC. 105 Megohms min. @ +125C at rated WVDC. 510 pF to 5100 pF: 105 Megohms min. @ +25C at rated WVDC. 104 Megohms min. @ +125C at rated WVDC. Typical circuit applications: Filters, Oscillators, Timing and RF Power Amplifiers. *For leaded styles only. WORKING VOLTAGE (WVDC): See Capacitance Values ENVIRONMENTAL TESTS Case B: 250% of rated WVDC for 5 secs. ATC 700 B Series Capacitors are designed and manufactured to meet and exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123. THERMAL SHOCK: MIL-STD-202, Method 107, Condition A. MOISTURE RESISTANCE: MIL-STD-202, Method 106. LOW VOLTAGE HUMIDITY: MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC applied while subjected to an environment of 85C with 85% relative humidity for 240 hours min. LIFE TEST: MIL-STD-202, Method 108, for 2000 hours, at 125C. 200% WVDC applied. Table, page 2. DIELECTRIC WITHSTANDING VOLTAGE (DWV): RETRACE: Less than (0.02% or 0.02 pF), whichever is greater. AGING EFFECTS: None PIEZOELECTRIC EFFECTS: None (No capacitance variation with voltage or pressure). CAPACITANCE DRIFT: (0.02% or 0.02 pF), whichever is greater. OPERATING TEMPERATURE RANGE: 0.1 to 5100 pF: from -55C to +125C (No derating of working voltage) TERMINATION STYLES: Available in various surface mount and leaded styles. See Mechanical Configurations, page 3. TERMINAL STRENGTH: Terminations for chips and pellets withstand a pull of 5 lbs. min., 15 lbs. typical, for 5 seconds in direction perpendicular to the termination sur-face of the capacitor. Test per MIL-STD-202, method 211. ATC # 001-814 Rev. L 1/07 ATC 700 B Capacitance Values CAP. CODE CAP. (pF) 0R1 0R2 0R3 0R4 0R5 0R6 0R7 0R8 0R9 1R0 1R1 1R2 1R3 1R4 1R5 1R6 1R7 1R8 1R9 2R0 2R1 2R2 2R4 2R7 3R0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.4 2.7 3.0 TOL. RATED WVDC CAP. CODE CAP. (pF) 3R3 3R6 3R9 4R3 4R7 5R1 5R6 6R2 6R8 7R5 8R2 9R1 100 110 120 130 150 160 180 200 220 240 270 300 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 B B, C B, C, D 500 RATED WVDC TOL. B, C, D B, C, J K, M 500 F, G, J, K, M CAP. CODE CAP. (pF) 330 360 390 430 470 510 560 620 680 750 820 910 101 111 121 131 151 161 181 201 221 241 271 301 33 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 160 180 200 220 240 270 300 RATED WVDC TOL. 500 F, G, J, K, M 300 200 CAP. CODE CAP. (pF) 331 361 391 431 471 511 561 621 681 751 821 911 102 112 122 152 182 222 272 302 332 392 472 512 330 360 390 430 470 510 560 620 680 750 820 910 1000 1100 1200 1500 1800 2200 2700 3000 3300 3900 4700 5100 TOL. RATED WVDC 200 100 F, G, J, K, M 50 VRMS = 0.707 x WVDC * SPECIAL VALUES, TOLERANCES, HIGHER WVDC AND MATCHING AVAILABLE. * ENCAPSULATION OPTION AVAILABLE. PLEASE CONSULT FACTORY. Capacitance values in bold type indicate porcelain dielectric. All other capacitance values indicate ceramic dielectric. All 700 B Capacitors are available laser marked with ATC's identification, capacitance code and tolerance. ATC PART NUMBER CODE ATC700 B 33 1 J W 500 X C Series Packaging T - Tape and Reel, 1000 pc. qty., 7" Reel std.* TV - Vertical Orientation of Product, Tape and Reel, 1000 pc. qty., 7" Reel std.* C - ATC Cap-Pac(R), 100 pc. qty. std.* I - Special Packaging. Consult Factory. *Consult ATC for other quantities Case Size Capacitance Code: First 2 significant digits for capacitance. R=Decimal Point Indicates number of zeros following digits of capacitance in picofarads except for decimal values. Capacitance Tolerance Laser Marking CAPACITANCE TOLERANCE Code Tol. B C D 0.1 pF 0.25 pF 0.5 pF F G 1% 2% K J WVDC Termination Code M 5% 10% 20% The above part number refers to a 700 B Series (case size B) 330 pF capacitor, J tolerance (5%), 500 WVDC, with W termination (Tin/Lead, Solder Plated over Nickel Barrier), laser marking and ATC Cap-Pac(R) packaging. ATC accepts orders for our parts using designations with or without the "ATC" prefix. Both methods of defining the part number are equivalent, i.e., part numbers referenced with the "ATC" prefix are interchangeable to parts referenced without the "ATC" prefix. Customers are free to use either in specifying or procuring parts from American Technical Ceramics. A M E R I C A N 2 w Consult factory for additional performance data. T E C H N I C A L ATC North America 631-622-4700 * sales@atceramics.com w For additional information and catalogs contact your ATC representative or call direct at (631) 622-4700. C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w . a t c e r a m i c s ATC Asia +86-755-8366-4318 * sales@atceramics-asia.com . c o m ATC 700 B Capacitors: Mechanical Configurations ATC SERIES & CASE SIZE ATC TERM. CODE MIL-PRF55681 700B W CDR14BP BODY DIMENSIONS INCHES (mm) OUTLINES CASE SIZE & TYPE W/T IS A TERMINATION SURFACE LENGTH (L) WIDTH (W) .110 .015 (2.79 0.38) Tin /Lead, Solder Plated over Nickel Barrier Termination T .110 +.020 -.010 (2.79 +0.51 -0.25) .110 .015 (2.79 0.38) Heavy Tin/Lead Coated, over Nickel Barrier Termination T .110 +.035 -.010 (2.79 +0.89 -0.25) .110 .015 (2.79 0.38) T .110 +.020 -.010 (2.79 +0.51 -0.25) .110 .015 (2.79 0.38) T .110 +.020 -.010 (2.79 +0.51 -0.25) Y W B Solder Plate L Y 700B P CDR14BP W B Pellet L Y 700B T N/A B W Solderable Nickel Barrier L Y 700B 700B CA MS CDR13BP CDR21BP W B Gold Chip L THICKNESS (T) .102 (2.59) max. OVERLAP (Y) WL RoHS Compliant Tin Plated over Nickel Barrier Termination RoHS Compliant Gold Plated over Nickel Barrier Termination Length ( LL ) .120 (3.05) max. W L Microstrip MATERIALS .015 (0.38) .010 (0.25) TL LL B LEAD AND TERMINATION DIMENSIONS AND MATERIALS Width ( WL ) Thickness ( TL ) T TL 700B AR CDR22BP B .135 .015 (3.43 0.38) LL WL W Axial Ribbon L B Radial Ribbon W T LL 700B RR CDR24BP .110 .015 (2.79 0.38 WL L .250 (6.35) min. .093 .005 .004 .001 (.102 (2.36 0.13) .025) .500 (12.7) min. #26 AWG., .016 (.406) dia. nominal N/A T .102 (2.59) max. LL 700B RW CDR23BP T B Radial Wire L W .145 .020 (3.68 0.51) LL 700B AW CDR25BP W B L Axial Wire T Additional lead styles available: Narrow Microstrip (NM), Narrow Axial Ribbon (NA) and Vertical Narrow Microstrip (H). Other lead lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant. For a complete military catalog, request American Technical Ceramics document ATC 001-818. A M E R I C A N 3 T E C H N I C A L ATC North America 631-622-4700 * sales@atceramics.com w w C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w . a t c e r a m i c s ATC Asia +86-755-8366-4318 * sales@atceramics-asia.com . c o m ATC 700 B Capacitors: Non-Magnetic Mechanical Configurations * ATC SERIES & CASE SIZE ATC TERM. CODE MIL-PRF55681 700B WN Meets Requirements 700B 700B 700B 700B 700B 700B 700B PN TN MN AN FN RN BN BODY DIMENSIONS INCHES (mm) OUTLINES Meets Requirements Meets Requirements Meets Requirements Meets Requirements Meets Requirements Meets Requirements Meets Requirements CASE SIZE & TYPE W/T IS A TERMINATION SURFACE LENGTH (L) WIDTH (W) .110 .015 (2.79 0.38) T .110 +.025 -.010 (2.79 +0.64 -0.25) .110 .015 (2.79 0.38) T .110 +.035 -.010 (2.79 +0.89 -0.25) .110 .015 (2.79 0.38) T .110 +.025 -.010 (2.79 +0.64 -0.25) Y B Non-Mag Solder Plate W L Y B Non-Mag Pellet W L Y B Non-Mag W Solderable Barrier L B LEAD AND TERMINATION** DIMENSIONS AND MATERIALS THICKNESS (T) OVERLAP (Y) Tin/Lead, Solder Plated over Non-Magnetic Barrier Termination .102 (2.59) max. .015 (0.38) .010 (0.25) WL Tin Plated over Non-Magnetic Barrier Termination Length ( LL ) .120 (3.05) max. W Non-Mag Microstrip L Heavy Tin/Lead Coated, over Non-Magnetic Barrier Termination RoHS Compliant TL LL MATERIALS Width ( WL ) Thickness ( TL ) T B TL .135 .015 (3.43 0.38) LL WL Non-Mag Axial Ribbon W L T LL B Non-Mag Radial Ribbon W .110 .015 (2.79 0.38) WL L .250 (6.35) min. .093 .005 .004 .001 (2.36 (.102 0.13) .025) .500 (12.7) min. #26 AWG., .016 (.406) dia. nominal N/A T .106 (2.69) max. LL B Non-Mag Radial Wire T L W .145 .020 (3.68 0.51) LL B W Non-Mag Axial Wire L T *Capacitors with values greater than 200 pF contain a trace magnetic element that may exhibit weak magnetic properties. **Additional lead styles available: Narrow Microstrip (DN), Narrow Axial Ribbon (GN) and Vertical Narrow Microstrip (HN). Other lead lengths are available; consult factory; All leads are high purity silver attached with high temperature solder and are RoHS compliant. Suggested Mounting Pad Dimensions A M E R I C A N 4 T E C H N I C A L ATC North America 631-622-4700 * sales@atceramics.com w w C E R A M I C S ATC Europe ATC Asia +46 8 6800410 * sales@atceramics-europe.com +86-755-8366-4318 * sales@atceramics-asia.com w . a t c e r a m i c s . c o m ATC 700 B Performance Data ESR VS. CAPACITANCE ATC SERIES 700, CASE B Q VS. CAPACITANCE ATC SERIES 700, CASE B 100000 1 150 MHz 1000 MHz 0.1 Q ESR (Ohms) 10000 1000 500 MHz 500 MHz 1000 MHz 150 MHz 100 (Typical) (Typical) 0.01 10 1 10 100 1 10 100 CAPACITANCE (pF) (1.0 pF to 51 pF) CAPACITANCE (pF) (1.0 pF to 51 pF) ESR VS. CAPACITANCE ATC SERIES 700, CASE B Q VS. CAPACITANCE ATC SERIES 700, CASE B 1 1000 100 1000 MHz 0.1 500 MHz Q ESR (Ohms) 150 MHz 1000 MHz 500 MHz 10 150 MHz (Typical) (Typical) 0.01 1 10 100 1000 10 100 CAPACITANCE (pF) (56 pF to 200 pF) CAPACITANCE (pF) (56 pF to 200 pF) ESR VS. CAPACITANCE ATC SERIES 700, CASE B Q VS. CAPACITANCE ATC SERIES 700, CASE B 1 1000 100 500 MHz 0.1 500 MHz 10 Q ESR (Ohms) 150 MHz 150 MHz (Typical) (Typical) 0.01 1 100 1000 10000 100 1000 CAPACITANCE (pF) (220 pF to 5100 pF) CAPACITANCE (pF) (220 pF to 5100 pF) A M E R I C A N 5 T E C H N I C A L ATC North America 631-622-4700 * sales@atceramics.com w w 10000 C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w . a t c e r a m i c s ATC Asia +86-755-8366-4318 * sales@atceramics-asia.com . c o m ATC 700 B Performance Data SERIES RESONANCE VS. CAPACITANCE ATC SERIES 700, CASE B CURRENT RATING VS. CAPACITANCE ATC SERIES 700, CASE B 100 100 RMS CURRENT (Amps) FREQUENCY (GHz) 10 The current rating is based on a 65C mounting surface and a device thermal resistance () of 20C/W. A power dissipation of 3 W will result in a case temperature of 125C. 1 0.1 10 1000 MHz 500 MHz 1 0.1 0.1 1 10 100 1000 0.1 10000 1 CAPACITANCE(pF) ( F) CAPACITANCE 10 100 CAPACITANCE (pF) (0.1 pF to 51 pF) CURRENT RATING VS. CAPACITANCE ATC SERIES 700, CASE B CURRENT RATING VS. CAPACITANCE ATC SERIES 700, CASE B 100 00 The current rating is based on a 65C mounting surface and a device thermal resistance () of 20C/W. A power dissipation of 3 W will result in a case temperature of 125C. 10 RMS CURRENT (Amps) RMS CURRENT (Amps) 30 MHz Dotted line = Power dissipation limited Solid line = Voltage limited (Vrms) (Typical) 0.01 150 MHz 150 MHz 500 MHz 1000 MHz 30 MHz Dotted line = Power dissipation limited Solid line = Voltage limited (Vrms) The current rating is based on a 65C mounting surface and a device thermal resistance () of 20C/W. A power dissipation of 3 W will result in a case temperature of 125C. 30 MHz 10 1 150 MHz 500 MHz Dotted line = Power dissipation limited Solid line = Voltage limited (Vrms) 1 10 100 100 1000 1000 CAPACITANCE (pF) (56 pF to 200 pF) CAPACITANCE CHANGE VS. TEMPERATURE ATC SERIES 700, CASE B 1 TC= 0 30 PPM/C 0.8 % CHANGE IN CAPACITANCE 10000 CAPACITANCE (pF) (220 pF to 5100 pF) 0.6 0.4 0.2 0 -0.2 -0.4 -0.6 -0.8 -1 -55 -35 -15 5 25 45 65 85 105 125 TEMPERATURE (Degrees C) Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document #001-992 Rev. A 10/03). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice. (c) 1996 American Technical Ceramics Corp. All Rights Reserved ATC # 001-814 Rev. L 1/07