FACTSHEET F-202-1 TCSD TMM 6,6 mm TCSD-20-D-02-01-N-R 2mm IDC CABLE STRIPS TCSD SERIES Mates with: TMM, TMMH, STMM, MMT, TW, MTMM, EHT TYPE STRIP END OPTION NO. PINS PER ROW 01 LENGTH PLATING OPTION OTHER OPTION N FEATURES * Low profile, only 5mm (.200") assembled height -N * Four-finger contacts optimize normal, insertion and withdrawal forces -"XX.XX" -05, -08, -10, -12, -13, -15, -17, -20, -22, -25 * Ask about our custom IDC design capabilities = Notch Polarization = Assembled Length -F Assembled Length in INCHES (1/8") 2 inches minimum = Gold flash on contact area, 150"(3,81m) Tin on balance Leave blank for standard plating: 30"(0,76m) Gold on contact area (Call for other sizes) SPECIFICATIONS For complete specifications see www.samtec.com?TCSD Insulator Material: Black Glass Filled Polyester Contact: BeCu Current Rating: 1A Operating Temp Range: -40C to +105C Plating: Au or Sn over 50" (1,27m) Ni Lead Size Accepted: (0,48mm) .019" to (0,53mm) .021" Contact Resistance: 10 m maximum Insertion Depth: (2,87mm) .113" to (3,17mm) .125" Insertion Force: 2 oz. (0,56N) average Withdrawal Force: 1.4 oz (0,39N) average Wire: 28 AWG 7/36 Stranded, Tinned, Copper with Gray PVC Insulator -S -D = Single End = Double End = Daisy Chain "XX" 1/8" Double Row Connectors 01 02 Specify "XX" as position number. Same position will be polarized on both ends. 1 4" minimum Outer Most (End of assembly) 4 -R -B "XX" TCSD = Socket Strip = Reversed = Breakout Specify "XX" as number of conductors to be broken out. (1,02) .040 (3,17) .125 5 01 "XX" 5"max. 2"min. Breakout starts with Number 1 lead indicated by brown wire or red stripe. Shown on top side. 2 -RW No. of Positions X (2,00) .0787 + (4,00) .157 (1,00) .039 POLARIZING KEY -M = Middle Reverse Requires -DXX = Reverse Wiring 5 -O (5,08) .200 = Outside Reverse 01 (2,00) .0787 Note: TCSD Series assemblies are nonstandard, non-returnable. -D "XX" 2" min. (4,00) .158 Specify PK-01-07 for polarizing key. Also polarizes SMM Series socket strips -P "XX" = Position Polarization (2,00) .0787 02 Blue or black wire opposite position #1. 3 Requires -DXX Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM SAMTEC USA * Tel: 1-800-SAMTEC-9 or 812-944-6733 * Fax: 812-948-5047 SAMTEC UK * Tel: 01236 739292 * Fax: 01236 727113 SAMTEC GERMANY * Tel: +49 (0) 89 / 89460-0 * Fax: +49 (0) 89 / 89460-299 SAMTEC FRANCE * Tel: 01 60 95 06 60 * Fax: 01 60 95 06 61 SAMTEC ITALY * Tel: 39 039 6890337 * Fax: 39 039 6890315 SAMTEC ASIA PACIFIC * Tel: 65 6745-5955 * Fax: 65 6841-1502 SAMTEC CHINA * Tel: 86-21-5385-4089 * Fax: 86-21-5385-4047 SAMTEC JAPAN * Tel: 81-424-42-8318 * Fax: 81-424-42-8319 SAMTEC TAIWAN * Tel: (02) 2364-6077 * Fax: (02) 2367-9531 SAMTEC HONG KONG * Tel: 852-26904858 * Fax: 852-26904842 5