TCSD–20–D–02–01–N–R
TCSD
TMM
6,6 mm
WWW.SAMTEC.COM
SAMTEC USA • Tel: 1-800-SAMTEC-9 or 812-944-6733 • Fax: 812-948-5047 SAMTEC UK • Tel: 01236 739292 • Fax: 01236 727113 SAMTEC GERMANY • Tel: +49 (0) 89 / 89460-0 • Fax: +49 (0) 89 / 89460-299
SAMTEC FRANCE • Tel: 01 60 95 06 60 • Fax: 01 60 95 06 61 SAMTEC ITALY • Tel: 39 039 6890337 • Fax: 39 039 6890315
SAMTEC ASIA PACIFIC • Tel: 65 6745-5955 • Fax: 65 6841-1502 SAMTEC CHINA • Tel: 86-21-5385-4089 • Fax: 86-21-5385-4047 SAMTEC JAPAN • Tel: 81-424-42-8318 • Fax: 81-424-42-8319
SAMTEC TAIWAN • Tel: (02) 2364-6077 • Fax: (02) 2367-9531 SAMTEC HONG KONG • Tel: 852-26904858 • Fax: 852-26904842
Due to technical progress, all designs, specifications and components are subject to change without notice.
FACTSHEET F-202-1
–M
=Middle Reverse
5
–R
=Reversed
TCSD SERIES
Mates with:
TMM, TMMH, STMM,
MMT, TW, MTMM, EHT
TYPE
STRIP
2mm IDC CABLE STRIPS
–O
=Outside Reverse
5
3Requires –DXX 5
Requires –DXX
• Low profile, only 5mm
(.200") assembled
height
• Four-finger contacts
optimize normal,
insertion and
withdrawal forces
• Ask about our
custom IDC design
capabilities
NO. PINS
PER ROW
END
OPTION
–“XX.XX”
=Assembled Length
OTHER
OPTION
–F
=Gold flash on contact area,
150µ"(3,81µm) Tin on balance
Assembled Length
in INCHES (±1/8")
2 inches minimum
Leave blank for standard plating:
30µ"(0,76µm) Gold on contact area
–05, –08,
–10, –12, –13,
–15, –17, –20,
–22, –25
(Call for other sizes)
–RW
=Reverse Wiring
01
02
Blue or black wire
opposite position #1.
1
Specify “XX” as position
number. Same position
will be polarized on
both ends.
01 PLATING
OPTION N
LENGTH
Note: TCSD Series
assemblies are non-
standard, non-returnable.
=Double End
–D
POLARIZING
KEY
Specify PK-01-07 for
polarizing key.
Also polarizes SMM
Series socket strips
4
2"
min.
4" minimum
“XX”
± 1/8"
Double
Row
Connectors
Outer
Most
(End of
assembly)
–D “XX”
=Daisy Chain
–P “XX”
=Position Polarization
01
02
–S
=Single End
TCSD=Socket Strip
(2,00)
.0787
(2,00)
.0787
No. of Positions X (2,00) .0787
+ (4,00) .157
(5,08)
.200
(1,00)
.039
(4,00)
.158
01
(3,17)
.125
(1,02)
.040
–N
=Notch Polarization
2
–B “XX”
=Breakout
“XX”
5"max.
2"min.
Specify “XX” as number of
conductors to be broken out.
Breakout starts with Number 1
lead indicated by brown wire or
red stripe. Shown on top side.
For complete specifications
see www.samtec.com?TCSD
Insulator Material:
Black Glass Filled
Polyester
Contact:
BeCu
Current Rating:
1A
Operating Temp Range:
-40°C to +105°C
Plating:
Au or Sn over 50µ"
(1,27µm) Ni
Lead Size Accepted:
(0,48mm) .019" to
(0,53mm) .021"
Contact Resistance:
10 mΩ maximum
Insertion Depth:
(2,87mm) .113" to
(3,17mm) .125"
Insertion Force:
2 oz. (0,56N) average
Withdrawal Force:
1.4 oz (0,39N) average
Wire:
28 AWG 7/36 Stranded,
Tinned, Copper with
Gray PVC Insulator
SPECIFICATIONS
FEATURES
