Cannon 75 Ohm Connectors QT-BNC This innovative termination technique provides the QT-BNC with a high pressure, gas tight center conductor joint of exceptional mechanical integrity, without crimping the center contact. The QT-BNC is a 75 ohm pre-assembled connector with an integral central contact and rear crimp ferrule. This connector may be terminated onto cable in under 20 seconds, significantly reducing installation costs. Applications * Central Office Switching * Cross Connect Equipment * Telecommunications Features and Benefits Designed to simplify field installations with less piece parts Optional right angle strain relief boot accessory (show above) Plastic rear cap is color coded for easy identification of cable type Compatible with select competitive crimp tools and die sets Telcordia Audited and Approved 3:1 reduction in assembly time than conventional 3 piece crimp BNC plugs RoHS Compliant Part Numbers Specifications Bump Cable Retention Connector Durability Contact Current Rating Contact/Insulator Retention Contact Resistance Corona Level Coupling Mechanism Retention DWV Frequency Range Impedance Insertion Force Insertion Loss Insulation Resistance Operating Temperature Operating Voltage RF Leakage Shock Termination Resistance (QT Center contact) Vibration VSWR Description Connector Body Insulators Center Contact Male Coupling Nut Crimp Ferrule Spring 4000 total at 390 m/s2 Cable Axial Force Torque M17/29-RG59/ 133 N (30 lbs) min. 0,9 Nm (8.0 in. lbs) 734 type 311 N (70 lbs) min. 0,9 Nm (8.0 in. lbs) 735A type 111 N (25 lbs) min. 0,45 Nm (4.0 in. lbs) BT3002 111 N (25 lbs) min. 0,45 Nm (4.0 in. lbs) 500 mating cycles min. 1.5 A dc max. 22,3 N (5 lbs) min. axial force Outer contact: 1.0 m max.; Braid to body: 1.0 m max. 375 V ac rms min. at 21 km (70,000 ft) 445 N (100 lbs) min. 1500 V ac rms at sea level DC to 2.0 GHz 75 nominal 22,3 N (5 lbs) max. 0.2 dB max. at 2 GHz 5000 M min. -40C to 85C (-40F to 185F) 500 V ac rms at sea level -60 dB typical up to 2 GHz 490 m/s2 for 11 ms 3 m max. (excluding pole resistance) (a) Frequency range from 10 Hz to 500 Hz. (b) Displacement: 0.75 (.029), (c) Acceleration: 98 m/s2,.(d) Duration: 6 hours. 1.2 max. (DC to 1 GHz); 1.3 max. (1 to 2 GHz) Finish 3.5 M (140 in.) Nickel -- 1.27 M (50 in.) Gold 2.0 M (80 in.) Nickel 3.8 M (150 in.) Nickel -- Material Phosphor bronze Polymers rated to UL 94V-0 Beryllium copper Die Cast, Copper Zinc Alloy Annealed Copper Alloy Stainless Steel Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 17 Cannon 75 Ohm Connectors QT-BNC QT BNC Plug 32,50 (1.280) O 14,45 (0.569) 12,70 (0.500) Part Number Cap Color Cable Type W58-124-9019910 Red 735A W58-124-901991A Red 735A W58-124-9019916 Red 735A W58-124-9039910 Yellow RG59B W58-124-9039916 Yellow RG59B W58-124-9069910 Blue 734 W58-124-9069916 Blue 734 W58-124-908991A White BT3002 / TZC75024 W58-124-919991A Red 0.4/2.42/4.07 W58-124-901991S Red 735A QT-BNC w/Boot W58-124-901991R Red 735A QT-BNC w/Boot 735A RTA Boot Only for 735A 33533-47-010006 45.43 25.00 RIGHT ANGLE BOOT. CABLE 30.75 25.00 Assembly Instructions: BBAI 1243 (RG-59) BBAI 1262 (735, 734) BBAI 1268 (BT 3002, TCZ75024) R9 .00 Mating Interface o 9.85 0.06 o 1.34 0.02 5.28 MIN. 0.4 0.3 SHOWN IN TERMINATED POSITION. TO END OF CONTACT. Tooling Accessories: Dual Action QT-BNC Hand Crimp Tool QT-BNC Pneumatic Crimp Tool Powered Coaxial Cable Strip Tools and Cutter Heads Please refer to the Tooling section pages 22-25 for part numbers. Last digit in p/n signifies packaging type: 0 = single bag A = 25 pc tray 6 = 100 pc bag S = single R = 100 pc bag RTA Boot = 1000 pc bag Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 18