Cannon 75 Ohm Connectors
QT-BNC
17
www.ittcannon.com
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
This innovative termination technique provides the QT-BNC with
ahigh pressure, gas tight center conductor joint of exceptional
mechanical integrity, without crimping the center contact. The
QT-BNC is a 75 ohm pre-assembled connector with an integral
central contact and rear crimp ferrule. This connector may be
terminated onto cable in under 20 seconds, significantly
reducing installation costs.
Applications
•Central Office Switching • Cross Connect Equipment • Telecommunications
Features and Benefits
Designed to simplify field installa-
tions with less piece parts
Plastic rear cap is color coded for
easy identification of cable type
Optional right angle strain relief
boot accessory (show above)
Compatible with select competitive
crimp tools and die sets
Telcordia Audited and Approved
3:1 reduction in assembly time
than conventional 3 piece crimp
BNC plugs
RoHS Compliant Part Numbers
Specifications
Bump 4000 total at 390 m/s2
Cable Retention Cable Axial Force Torque
M17/29-RG59/ 133 N (30 lbs) min. 0,9 Nm (8.0 in. lbs)
734 type 311 N (70 lbs) min. 0,9 Nm (8.0 in. lbs)
735A type 111N(25 lbs) min. 0,45 Nm (4.0 in. lbs)
BT3002 111N(25 lbs) min. 0,45 Nm (4.0 in. lbs)
Connector Durability 500 mating cycles min.
Contact Current Rating 1.5 A dc max.
Contact/Insulator Retention 22,3 N (5 lbs) min. axial force
Contact Resistance Outer contact: 1.0 mΩmax.; Braid to body: 1.0 mΩmax.
Corona Level 375 V ac rms min. at 21 km (70,000 ft)
Coupling Mechanism Retention 445 N (100 lbs) min.
DWV 1500 V ac rms at sea level
Frequency Range DC to 2.0 GHz
Impedance 75Ωnominal
Insertion Force 22,3 N (5 lbs) max.
Insertion Loss 0.2 dB max. at 2 GHz
Insulation Resistance 5000 MΩmin.
Operating Temperature –40°C to 85°C (–40°F to 185°F)
Operating Voltage 500 V ac rms at sea level
RF Leakage –60 dB typical up to 2 GHz
Shock 490 m/s2for 11 ms
Termination Resistance (QT Center contact) 3 mΩmax. (excluding pole resistance)
Vibration (a) Frequency range from 10 Hz to 500 Hz. (b) Displacement: 0.75 (.029),
(c) Acceleration: 98 m/s2,.(d) Duration: 6 hours.
VSWR 1.2 max. (DC to 1 GHz); 1.3 max. (1 to 2 GHz)
Description Material Finish
Connector Body Phosphor bronze 3.5 µM (140 µ in.) Nickel
Insulators Polymers rated to UL 94V-0 —
Center Contact Male Beryllium copper 1.27 µM (50 µ in.) Gold
Coupling Nut Die Cast, Copper Zinc Alloy 2.0 µM (80 µ in.) Nickel
Crimp Ferrule Annealed Copper Alloy 3.8 µM (150 µ in.) Nickel
Spring Stainless Steel —