APT40GF120JRD 1200V 60A E E Fast IGBT & FRED The Fast IGBTTM is a new generation of high voltage power IGBTs. Using NonPunch Through Technology the Fast IGBTTM combined with an APT freewheeling ultraFast Recovery Epitaxial Diode (FRED) offers superior ruggedness and fast switching speed. 27 2 T- C G SO "UL Recognized" ISOTOP (R) * Low Forward Voltage Drop * High Freq. Switching to 20KHz * Low Tail Current * Ultra Low Leakage Current * RBSOA and SCSOA Rated * Ultrafast Soft Recovery Antiparallel Diode G E All Ratings: TC = 25C unless otherwise specified. MAXIMUM RATINGS (IGBT) Symbol Parameter APT40GF120JRD Collector-Emitter Voltage 1200 VCGR Collector-Gate Voltage (RGE = 20K) 1200 I C1 Continuous Collector Current @ TC = 25C I C2 Continuous Collector Current @ TC = 90C Pulsed Collector Current I CM2 Pulsed Collector Current 1 PD Total Power Dissipation @ TC = 90C UNIT Volts 20 60 40 Amps 120 80 390 Watts -55 to 150 Operating and Storage Junction Temperature Range C 300 EL I Max. Lead Temp. for Soldering: 0.063" from Case for 10 Sec. PR TL @ TC = 25C M I CM1 1 A Gate-Emitter Voltage IN VGE RY VCES TJ,TSTG C STATIC ELECTRICAL CHARACTERISTICS (IGBT) BVCES VGE(TH) VCE(ON) I CES I GES Characteristic / Test Conditions MIN TYP MAX 5.5 6.5 Collector-Emitter On Voltage (VGE = 15V, I C = 40A, Tj = 25C) 2.9 3.4 Collector-Emitter On Voltage (VGE = 15V, I C = 40A, Tj = 125C) 3.5 4.1 1200 Collector-Emitter Breakdown Voltage (VGE = 0V, I C = 0.8mA) Gate Threshold Voltage 4.5 (VCE = VGE, I C = 700A, Tj = 25C) Collector Cut-off Current (VCE = VCES, VGE = 0V, Tj = 25C) 2 Collector Cut-off Current (VCE = VCES, VGE = 0V, Tj = 125C) UNIT Volts 0.8 2 TBD 100 Gate-Emitter Leakage Current (VGE = 20V, VCE = 0V) mA nA CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. USA APT Website - http://www.advancedpower.com 405 S.W. Columbia Street Bend, Oregon 97702 -1035 Phone: (541) 382-8028 FAX: (541) 388-0364 F-33700 Merignac - France Phone: (33) 5 57 92 15 15 FAX: (33) 5 56 47 97 61 EUROPE Avenue J.F. Kennedy Bat B4 Parc Cadera Nord 052-6256 Rev A Symbol DYNAMIC CHARACTERISTICS (IGBT) Test Conditions Characteristic Input Capacitance Coes Output Capacitance Cres Reverse Transfer Capacitance Qg Total Gate Charge Qge Gate-Emitter Charge Qgc Gate-Collector ("Miller") Charge td(on) tr td(off) tf Eon Turn-on Delay Time 230 345 Gate Charge VGE = 15V 320 30 Resistive Switching (25C) 35 VGE = 15V 130 A Turn-on Delay Time Turn-off Delay Time Fall Time Turn-on Switching Energy PR 140 I C = I C2 R G = 5 4.5 TJ = +150C 5.0 Inductive Switching (25C) VCLAMP(Peak) = 0.66VCES 35 100 R G = 5 105 TJ = +25C 8.0 Fall Time 4 Total Switching Losses gfe Forward Transconductance VCE = 20V, I C = I C2 ns 340 I C = I C2 Ets mJ 9.5 VGE = 15V Turn-off Delay Time ns 400 4 Turn-on Delay Time ns 90 VGE = 15V 4 nC 35 Inductive Switching (150C) VCLAMP(Peak) = 0.66VCES Rise Time pF 145 RG = 5 Fall Time UNIT 215 I C = I C2 Total Switching Losses tf f = 1 MHz VCC = 0.8VCES Ets td(off) 700 200 Turn-off Delay Time Rise Time 490 I C = I C2 Rise Time Turn-off Switching Energy tr 4700 VCC = 0.5VCES Eoff td(on) 3500 IN tf 3 IM td(off) MAX VCE = 25V EL tr TYP Capacitance VGE = 0V Cies td(on) MIN RY Symbol APT40GF120JRD mJ 6 S THERMAL AND MECHANICAL CHARACTERISTICS (IGBT and FRED) Symbol RJC RJA WT 052-6256 Rev A Torque Characteristic MIN TYP MAX Junction to Case (IGBT) 0.32 Junction to Case (FRED) 0.66 C/W 20 Junction to Ambient Package Weight UNIT 1.03 oz 29.2 gm 10 lb*in 1.1 N*m Mounting Torque (Mounting = 8-32 or 4mm Machine and Terminals = 4mm Machine) 1 Repetitive Rating: Pulse width limited by maximum junction temperature. 2 Leakages include the FRED and IGBT. 3 See MIL-STD-750 Method 3471 4 Switching losses include the FRED and IGBT. APT Reserves the right to change, without notice, the specifications and information contained herein. APT40GF120JRD ULTRAFAST SOFT RECOVERY PARALLEL DIODE All Ratings: TC = 25C unless otherwise specified. MAXIMUM RATINGS (FRED) Symbol VR Characteristic / Test Conditions Maximum Peak Repetitive Reverse Voltage VRWM Maximum Working Peak Reverse Voltage IF(AV) Maximum Average Forward Current (TC = 60C, Duty Cycle = 0.5) 1200 Volts 100 RY RMS Forward Current 60 Amps 540 Non-Repetitive Forward Surge Current (TJ = 45C, 8.3mS) IN A IFSM UNIT Maximum D.C. Reverse Voltage VRRM IF(RMS) APT40GF120JRD STATIC ELECTRICAL CHARACTERISTICS (FRED) Characteristic / Test Conditions MIN IM Symbol TYP 2.0 IF = 120A Volts 2.0 IF = 60A, TJ = 150C PR EL Maximum Forward Voltage UNIT 2.5 IF = 60A VF MAX DYNAMIC CHARACTERISTICS (FRED) Characteristic MIN TYP MAX 85 trr1 Reverse Recovery Time, IF = 1.0A, diF /dt = -15A/s, VR = 30V, TJ = 25C 70 trr2 Reverse Recovery Time TJ = 25C 70 trr3 IF = 60A, diF /dt = -480A/s, VR = 650V TJ = 100C 130 tfr1 Forward Recovery Time TJ = 25C 170 tfr2 IF = 60A, diF /dt = 480A/s, VR = 650V TJ = 100C 170 IRRM1 Reverse Recovery Current TJ = 25C 18 30 IRRM2 IF = 60A, diF /dt = -480A/s, VR = 650V TJ = 100C 29 40 Qrr1 Recovery Charge TJ = 25C 630 Qrr2 IF = 60A, diF /dt = -480A/s, VR = 650V TJ = 100C 1820 Vfr1 Forward Recovery Voltage TJ = 25C 12 Vfr2 IF = 60A, diF /dt = 480A/s, VR = 650V TJ = 100C 12 Rate of Fall of Recovery Current TJ = 25C 900 IF = 60A, diF /dt = -480A/s, VR =650V TJ = 100C 600 diM/dt UNIT ns Amps nC Volts A/s 052-6256 Rev A Symbol APT40GF120JRD Vr D.U.T. trr/Qrr Waveform 30H PEARSON 411 CURRENT TRANSFORMER PR EL IM IN A RY +15v diF /dt Adjust 0v -15v Figure 25, Diode Reverse Recovery Test Circuit and Waveforms 1 IF - Forward Conduction Current 2 diF /dt - Current Slew Rate, Rate of Forward Current Change Through Zero Crossing. 3 IRRM - Peak Reverse Recovery Current. 4 trr - Reverse Recovery Time Measured from Point of IF 1 4 6 Zero 5 3 Current Falling Through Zero to a Tangent Line { 6 diM/dt} Extrapolated Through Zero Defined by 0.75 and 0.50 IRRM. 0.5 IRRM 0.75 IRRM 2 5 Qrr - Area Under the Curve Defined by IRRM and trr. 6 diM/dt - Maximum Rate of Current Change During the Trailing Portion of trr. Qrr = 1/2 (trr . IRRM) Figure 8, Diode Reverse Recovery Waveform and Definitions SOT-227 (ISOTOP(R)) Package Outline 11.8 (.463) 12.2 (.480) 31.5 (1.240) 31.7 (1.248) 7.8 (.307) 8.2 (.322) r = 4.0 (.157) (2 places) W=4.1 (.161) W=4.3 (.169) H=4.8 (.187) H=4.9 (.193) (4 places) 8.9 (.350) 9.6 (.378) Hex Nut M4 (4 places) 25.2 (0.992) 0.75 (.030) 12.6 (.496) 25.4 (1.000) 0.85 (.033) 12.8 (.504) 4.0 (.157) 4.2 (.165) (2 places) 3.3 (.129) 3.6 (.143) 14.9 (.587) 15.1 (.594) 1.95 (.077) 2.14 (.084) * Emitter 052-6256 Rev A 30.1 (1.185) 30.3 (1.193) Collector * Source terminals are shorted internally. Current handling capability is equal for either Source terminal. 38.0 (1.496) 38.2 (1.504) * Emitter Dimensions in Millimeters and (Inches) Gate