WWW.PHIHONG.COM 12W Wall Plug Adapter PSA12x Adapter Series Meets EISA and Ecodesign Requirements Features Double Insulated Class B EMI Ecodesign ErP Directive 2009/125/EC level 2 annex 1b Compliant Less Than 0.3W No-Load Current Over-Voltage Protection Efficiency Level V Compliance Applications Wireless Communications Networking Portable Equipment Peripherals Safety Approvals cUL/UL (A-Model) BSMI (A-Model) TUV (E-Model) CE (E-Model) Mechanical Characteristics (1) Length: 71.5mm (2.81in) Width: 33.75mm (1.33in) Height: 46mm (1.81in) Weight: 85g (3.00oz) Output Specifications Model (3) PSA12x-120 (1) (2) (3) (4) (4) DC Output Voltage 12V Load Min. 0A Max. 1.0A Ripple (2) P-P (max.) 240mV Regulation Line & Load 5% Efficiency Level Dimensions for PSA12A-120 model Measured with an oscilloscope with 20MHz (or over) Bandwidth. Outputs should be bypassed at a connector with a 0.1uF ceramic capacitor and a 10uF electrolytic capacitor. Minimum order requirement of 2500 pieces for both US and EU models. X = A for US version, E for EU version Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 7/17/2012 PSA12x Characteristics Input: AC Input Voltage Rating WWW.PHIHONG.COM Over-Voltage Protection Output voltage shall not exceed 20V 100 to 240 V AC Short-Circuit Protection AC Input Voltage Range 90 to 264V AC AC Input Frequency 50 to 60Hz Input Current 0.5A (RMS) maximum at 120V AC 0.25A (RMS) maximum at 240V AC Protected against short circuit. Continuous short circuit will not produce fire, smoke or excessive heat Environmental: Temperature Operation Non-operation Humidity 0 to +40C -40 to +80C 10 to 90% Emissions 0.25A maximum at 264V AC FCC Class B EN55022 Class B Inrush Current Immunity 30A for 120V AC at maximum load 60A for 230V AC at maximum load EN50082-1: EN61000-4-2 EN61000-4-5 Leakage Current Input Power Saving <0.3W maximum at no load (EN55024) Level 4 Level 3 Dielectric Withstand (Hi-pot) Test Primary to Secondary: 3000V AC for 1 min., 10mA Output: Efficiency DC Output Connector 77.76% minimum average efficiency 2.1 x 5.5mm Center Positive Standard Hold-up Time Mating Connector 10mS minim at 120V AC and maximum load Dimension Diagram Unit: mm - PSA12A-120 Kycon KLD-0202-A or equivalent Dimension Diagram Unit: mm - PSA12E-120 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Phihong: PSA12A-120-R PSA12E-120-R