Hyper TOPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LS T676, LA T676, LO T676, LY T676 Besondere Merkmale Features * Gehausetyp: weies P-LCC-2 Gehause, farbloser klarer Verguss * Besonderheit des Bauteils: extrem breite Abstrahlcharakteristik; ideal fur Hinterleuchtungen und Einkopplungen in Lichtleiter * Wellenlange: 633 nm (super-rot), 615 nm (amber), 606 nm (orange), 587 nm (gelb) * Abstrahlwinkel: Lambertscher Strahler (120) * Technologie: InGaAlP * optischer Wirkungsgrad: 11 lm/W (gelb, orange, amber), 7 lm/W (super-rot) * Gruppierungsparameter: Lichtstarke, Wellenlange * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: Reflow Loten und Wellenloten (TTW) * Vorbehandlung: nach JEDEC Level 2 * Gurtung: 8-mm Gurt mit 2000/Rolle, o180 mm oder 8000/Rolle, o330 mm * ESD-Festigkeit: ESD-sicher bis 2 kV nach JESD22-A114-D * Erweiterte Korrosionsfestigkeit: Details siehe Seite 9 * package: white P-LCC-2 package, colorless clear resin * feature of the device: extremely wide viewing angle; ideal for backlighting and coupling in light guides * wavelength: 633 nm (super-red), 615 nm (amber), 606 nm (orange), 587 nm (yellow) * viewing angle: Lambertian Emitter (120) * technology: InGaAlP * optical efficiency: 11 lm/W (yellow, orange, amber), 7 lm/W (super-red) * grouping parameter: luminous intensity, wavelength * assembly methods: suitable for all SMT assembly methods * soldering methods: reflow soldering and TTW soldering * preconditioning: acc. to JEDEC Level 2 * taping: 8 mm tape with 2000/reel, o180 mm or 8000/reel, o330 mm * ESD-withstand voltage: up to 2 kV acc. to JESD22-A114-D * Superior Corrosion Robustness: details see page 9 Anwendungen Applications * Informationsanzeigen im Innen- und Auenbereich (z. B. im Verkehrsbereich; Laufschriftanzeigen) * optischer Indikator * Einkopplung in Lichtleiter * Hinterleuchtung (LCD, Handy, Schalter, Tasten, Displays, Werbebeleuchtung) * Innenbeleuchtung im Automobilbereich (z. B. Instrumentenbeleuchtung) * Ersatz von Kleinst-Gluhlampen * Signal- und Symbolleuchten * indoor and outdoor displays (e.g. displays for traffic; light writing displays) * optical indicators * coupling into light guides * backlighting (LCD, cellular phones, switches, keys, displays, illuminated advertising) * interior automotive lighting (e.g. dashboard backlighting) * substitution of micro incandescent lamps * signal and symbol luminaire 2010-05-12 1 LS T676, LA T676, LO T676, LY T676 Bestellinformation Ordering Information Typ Emissionsfarbe Lichtstarke1) Seite 15 Lichtstrom2) Seite 15 Bestellnummer Type Color of Emission Luminous Intensity1) page 15 Luminous Flux2) page 15 IF = 20 mA IV (mcd) IF = 20 mA V (mlm) Ordering Code LS T676-Q1R2-1 LS T676-R1S1-1 LS T676-P2S1-1 super-red 71 ... 180 112 ... 224 56 ... 224 380 (typ.) 480 (typ.) 420 (typ.) Q65110A2151 Q65110A2152 Q65110A2153 LA T676-R1S2-24 LA T676-S1T1-24 LA T676-Q2T1-24 amber 112 ... 280 180 ... 355 90 ... 355 600 (typ.) 760 (typ.) 665 (typ.) Q65110A9274 Q65110A9275 Q65110A9273 LO T676-R1S2-24 LO T676-S1T1-24 LO T676-Q2T1-24 orange 112 ... 280 180 ... 355 90 ... 355 600 (typ.) 760 (typ.) 665 (typ.) Q65110A2148 Q65110A2149 Q65110A2150 LY T676-R1S2-26 LY T676-S1T1-26 LY T676-Q2T1-26 yellow 112 ... 280 180 ... 355 90 ... 355 600 (typ.) 760 (typ.) 665 (typ.) Q65110A2154 Q65110A2155 Q65110A2156 Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 5 fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LO T676-R1S2-24 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen R1, R2, S1 oder S2 enthalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Wellenlangengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Wellenlangengruppe geliefert. Z.B.: LO T676-R1S2-24 bedeutet, dass auf dem Gurt nur eine der Wellenlangengruppen -2, -3, oder -4 enthalten ist (siehe Seite 5 fur nahere Information). LS T676-R1S1-1 bedeutet, dass das Bauteil innerhalb der auf Seite 4 spezifizierten Grenzen geliefert wird. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Wellenlangengruppen nicht bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LO T676-R1S2-24 means that only one group R1, R2, S1 or S2 will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. E.g. LO T676-R1S2-24 means that only 1 wavelength group -2, -3, or -4 will be shippable (see page 5 for explanation). LS T676-R1S1-1 means that the device will be shiped within the specified limits as stated on page 4. In order to ensure availability, single wavelength groups will not be orderable. 2010-05-12 2 LS T676, LA T676, LO T676, LY T676 Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Werte Values Einheit Unit Betriebstemperatur Operating temperature range Top - 40 ... + 100 C Lagertemperatur Storage temperature range Tstg - 40 ... + 100 C Sperrschichttemperatur Junction temperature Tj + 125 C Durchlassstrom Forward current (TA=25C) IF 30 mA Stostrom Surge current t 10 s, D = 0.005, TA=25C IFM Sperrspannung3) Seite 15 Reverse voltage3) page 15 (TA=25C) VR 12 V Leistungsaufnahme Power consumption (TA=25C) Ptot 80 mW Rth JA 500 K/W Rth JS 280 K/W LS, LO, LA LY Warmewiderstand Thermal resistance Sperrschicht/Umgebung4) Seite 15 Junction/ambient4) page 15 Sperrschicht/Lotpad Junction/solder point 2010-05-12 3 1 0.2 A LS T676, LA T676, LO T676, LY T676 Kennwerte Characteristics (TA = 25 C) Bezeichnung Parameter Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 20 mA Symbol Symbol (typ.) Dominantwellenlange5) Seite 15 Dominant wavelength5) page 15 IF = 20 mA Werte Values Einheit Unit LS LA LO LY peak 645 622 610 591 dom 633 6 615 606* 587* nm +9/-6 +3/-6 +8/-7 nm Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 20 mA (typ.) 16 16 16 15 nm Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV (typ.) 2 120 120 120 120 Grad deg. Durchlassspannung6) Seite 15 Forward voltage6) page 15 IF = 20 mA (min.) (typ.) (max.) VF VF VF 1.8 2.0 2.3 1.83 1.85 1.9 2.0 2.0 2.0 2.33 2.35 2.4 Sperrstrom Reverse current VR = 12 V (typ.) (max.) IR IR 0.01 0.01 0.01 0.01 A 10 10 10 10 A V V V Temperaturkoeffizient von peak Temperature coefficient of peak IF = 20 mA; -10C T 100C (typ.) TCpeak 0.14 0.13 0.13 0.13 nm/K Temperaturkoeffizient von dom Temperature coefficient of dom IF = 20 mA; -10C T 100C (typ.) TCdom 0.05 0.06 0.07 0.10 nm/K Temperaturkoeffizient von VF Temperature coefficient of VF IF = 20 mA; -10C T 100C (typ.) TCV - 2.0 - 1.8 - 1.7 - 2.5 mV/K Optischer Wirkungsgrad Optical efficiency IF = 20 mA (typ.) opt 7 * Einzelgruppen siehe Seite 5 Individual groups on page 5 2010-05-12 4 11 11 11 lm/W LS T676, LA T676, LO T676, LY T676 Wellenlangengruppen (Dominantwellenlange)5) Seite 15 Wavelength Groups (Dominant Wavelength)5) page 15 Gruppe Group yellow orange amber Einheit Unit min. max. min. max. min max 2 580 583 600 603 609 621 nm 612 616 3 583 586 603 nm 606 616 620 nm 4 586 589 606 5 589 592 609 620 624 nm nm 6 592 595 nm 1 Helligkeits-Gruppierungsschema Brightness Groups Helligkeitsgruppe Brightness Group Lichtstarke1) Seite 15 Luminous Intensity1) page 15 IV (mcd) P2 Q1 Q2 R1 R2 S1 S2 T1 56 ... 71 ... 90 ... 112 ... 140 ... 180 ... 224 ... 280 ... 71 90 112 140 180 224 280 355 Lichtstrom2) Seite 15 Luminous Flux2) page 15 V (mlm) 190 (typ.) 240 (typ.) 300 (typ.) 380 (typ.) 480 (typ.) 600 (typ.) 760 (typ.) 950 (typ.) Anm.: Die Standardlieferform von Serientypen beinhaltet entweder eine untere Familiengruppe, eine obere Familiengruppe oder eine Sammelgruppe, die aus nur 3 bzw. 4 bzw. 6 Helligkeitsgruppen bestehen. Einzelne Helligkeitsgruppen konnen nicht bestellt werden. Note: The standard shipping format for serial types includes either a lower family group, an upper family group or a grouping of all individual brightness groups of 3 or 4 or 6 individual brightness groups. Individual brightness groups cannot be ordered. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: R1-3 Example: R1-3 Helligkeitsgruppe Brightness Group Wellenlange Wavelength R1 3 Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe fur jede Selektion enthalten. Note: No packing unit / tape ever contains more than one group for each selection. 2010-05-12 5 LS T676, LA T676, LO T676, LY T676 Relative spektrale Emission2) Seite 15 Relative Spectral Emission2) page 15 V() = spektrale Augenempfindlichkeit / Standard eye response curve Irel = f (); TA = 25 C; IF = 20 mA OHL00235 100 % Irel 80 V 60 yellow orange amber super-red 40 20 0 400 450 500 550 600 650 nm 700 Abstrahlcharakteristik2) Seite 15 Radiation Characteristic2) page 15 Irel = f (); TA = 25 C 40 30 20 10 0 50 OHL01660 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2010-05-12 0.8 0.6 0.4 0 20 6 40 60 80 100 120 LS T676, LA T676, LO T676, LY T676 Durchlassstrom2) Seite 15 Forward Current2) page 15 IF = f (VF); TA = 25 C Relative Lichtstarke2) 7) Seite 15 Relative Luminous Intensity2) 7) page 15 IV/IV(20 mA) = f (IF); TA = 25 C OHL00232 10 2 mA 5 OHL10233 10 1 IV I V (20 mA) IF 10 0 10 1 5 10 -1 10 0 5 super-red yellow orange/amber 10 -1 1 1.4 1.8 2.2 2.6 10 -2 10 0 3 V 3.4 10 1 mA Relative Lichtstarke2) Seite 15 Relative Luminous Intensity2) page 15 IV/IV(25 C) = f (Tj); IF = 20 mA Maximal zulassiger Durchlassstrom Max. Permissible Forward Current IF = f (T) OHL01031 35 10 2 IF VF OHL00238 IV 2.0 I F mA IV (25 C) 30 1.6 TS orange yellow amber super-red 25 TA 1.2 20 15 0.8 10 TA temp. ambient TS temp. solder point 5 0 0 20 40 60 0 -20 80 C 100 T 2010-05-12 orange yellow amber super-red 0.4 0 20 40 60 C 100 Tj 7 LS T676, LA T676, LO T676, LY T676 Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 C LS, LA, LO OHL00318 100 A IF Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 85 C LS, LA, LO IF 100 A 5 5 OHL01427 t tP IF D = TP T D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10-1 D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10-1 5 5 t D = TP tP IF T 10-2 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2 10-2 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2 tp tp Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 C LY Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 85 C LY IF 100 A 5 OHL00316 tP D= T tP IF IF 100 A 5 T 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10-1 5 5 IF T 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10-2 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2 10-2 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2 tp 2010-05-12 t D = TP D= D= 10-1 OHL01432 tP tp 8 LS T676, LA T676, LO T676, LY T676 Mazeichnung8) Seite 15 Package Outlines8) page 15 2.1 (0.083) 3.0 (0.118) 2.6 (0.102) 2.3 (0.091) 1.7 (0.067) 0.1 (0.004) (typ.) 0.9 (0.035) 0.7 (0.028) 3.4 (0.134) 3.0 (0.118) (2.4) (0.095) 3.7 (0.146) 3.3 (0.130) 41 2.1 (0.083) A Cathode marking 0.5 (0.020) 1.1 (0.043) C 0.6 (0.024) 0.4 (0.016) 0.18 (0.007) 0.12 (0.005) GPLY6724 Korrosionsfestigkeit besser als EN 60068-2-60 (method 4): mit erweitertem Korrosionstest: 40C / 90%rh / 15ppm H2S / 336h Corrosion robustness better than EN 60068-2-60 (method 4): with enhanced corrosion test: 40C / 90%rh / 15ppm H2S / 336h Kathodenkennung: Cathode mark: Gewicht / Approx. weight: abgeschragte Ecke bevelled edge 35 mg Gurtung / Polaritat und Lage8) Seite 15 Verpackungseinheit 2000/Rolle, o180 mm oder 8000/Rolle, o330 mm Packing unit 2000/reel, o180 mm or 8000/reel, o330 mm 2.9 (0.114) 4 (0.157) 2010-05-12 9 Cathode/Collector Marking 8 (0.315) 2 (0.079) 1.75 (0.069) 4 (0.157) 3.5 (0.138) 1.5 (0.059) 3.6 (0.142) Method of Taping / Polarity and Orientation8) page 15 OHAY2271 LS T676, LA T676, LO T676, LY T676 Empfohlenes Lotpaddesign8) 9) Seite 15 Recommended Solder Pad8) 9) page 15 Reflow Loten Reflow Soldering 2.6 (0.102) 4.5 (0.177) 1.5 (0.059) 1.5 (0.059) 4.5 (0.177) 2.6 (0.102) Padgeometrie fur verbesserte Warmeableitung Lotstopplack Solder resist Paddesign for improved heat dissipation Cu-Flache > 16 mm 2 Cu-area > 16 mm 2 OHLPY970 Empfohlenes Lotpaddesign verwendbar fur TOPLED und Power TOPLED Reflow Loten 8) Seite 15 Recommended Solder Pad useable for TOPLED and Power TOPLED Reflow Soldering8) page 15 Flache darf elektrisch nicht beschaltet werden. Do not use this area for electrical contact. Padgeometrie fur verbesserte Warmeableitung 3.3 (0.130) Paddesign for improved heat dissipation 3.3 (0.130) Anode 2.3 (0.091) 11.1 (0.437) 1.5 (0.059) 1.1 (0.043) 3.7 (0.146) 0.8 (0.031) 0.7 (0.028) Kathode/ Cathode Flache darf elektrisch nicht beschaltet werden. Do not use this area for electrical contact. Lotstoplack Solder resist 2010-05-12 10 Cu Flache / <_ 16 mm 2 per pad Cu-area OHLPY440 LS T676, LA T676, LO T676, LY T676 Lotbedingungen Soldering Conditions Vorbehandlung nach JEDEC Level 2 Preconditioning acc. to JEDEC Level 2 Reflow Lotprofil fur bleifreies Loten Reflow Soldering Profile for lead free soldering (nach J-STD-020B) (acc. to J-STD-020B) OHLA0687 300 Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile C 255 C 240 C T 250 C 260 C +0 -5 C 245 C 5 C C 235 C +5 -0 C 217 C 10 s min 200 30 s max Ramp Down 6 K/s (max) 150 100 s max 120 s max 100 Ramp Up 3 K/s (max) 50 25 C 0 0 50 100 150 200 250 s 300 t Wellenloten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802) OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling 0 0 50 100 150 200 t 2010-05-12 11 s 250 LS T676, LA T676, LO T676, LY T676 Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto Lx xxxx Bin1: Bin Information Color 1 Bin2: Product Name Bin3: Sa m pl e Semiconductors RoHS Compliant ML Temp ST 2 260 C RT (6P) BATCH NO: Batch Number Bar Code (1T) LOT NO: Lot Number Additional TEXT (9D) D/C: Date Code R077 Bar Code (X) PROD NO: Product Code DEMY PACKVAR: Packing Type (Q)QTY: Product Quantity per Reel (G) GROUP: X - X - X Bar Code Forward Voltage Group Wavelength Group Brightness Group OHA12043 Gurtverpackung Tape and Reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Gurtvorlauf: 400 mm 400 mm Leader: Gurtende: Trailer: 160 mm 160 mm OHAY0324 Tape dimensions in mm (inch) W 8 + 0.3 - 0.1 P0 P1 P2 D0 E F 4 0.1 4 0.1 2 0.05 1.5 + 0.1 1.75 0.1 3.5 0.05 (0.157 0.004) (0.157 0.004) (0.079 0.002) (0.059 + 0.004) (0.069 0.004) (0.138 0.002) Reel dimensions in mm (inch) A W Nmin W1 W2 max 180 (7) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) 330 (13) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) 2010-05-12 12 LS T676, LA T676, LO T676, LY T676 Trockenverpackung und Materialien Dry Packing Process and Materials Moisture-sensitive label or print L VE LE Barcode label l see labe k, If code blan bar ). (RH . RH idity hum 0% e tive d C/6 kag rela are 30 s _ < infr pac IVE RS of TO rs 90% to ak tain SIT rs < ns ed (pe UC e). or rs con Hou SEN rs Hou ND and ject ditio cod C, 72 sing Hou e 5 bag E 48 C sub Hou con s UR ICO ces 24 6 dat 40 be time C ory ThiISTSEM pro < time . or 23 time at t will l with or fact entC) . MO Flo time s TO at or at Flo l tica d tha or ival ure nth OP Flo 4 if: rea w Flo labe mo ices iden 5 ced equ el n e 5a is el ing, belo or 24 pro 6 Lev e dev : el e cod , unt whe Lev el re ow, see bag Lev l dat re mo bak bar ned Lev refl istu 10% re led time sea for istu ore> re ope e Mo see istu k, is or . sea is has k, Mo bef istu d 033 Mo in Flo RH blan Mo or-p blan in bag Car ing, r TDlife (if If with t. r lf 10%bak or J-S thisvapp. Yea _ eks rs < r ed icat med, C 1 Yea tem She ow, at uire not > y 1 WeHou DE unt Afte Ind 4 uire refl is red req 2. bod Mo /JE time 168 req : 2b a) Sto ices idity time or is IPC or time b) ned Flo or Hum ing ce time or Dev 2a e Flo a) ope or 3. b) bakren Flo 1 l dat Flo If 2 refe time el 2a 4. el sea 3 Lev el and Lev el re Bag e Lev re Lev istu Dat re istu re Mo istu Mo istu Mo Mo N O TI U A C 1. M RA OS Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM OSR Desiccant OHA00539 Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials 8 Q- 1 R1 lti LS TO Y T6 PL 76 1+ P- Mu rs D/C : 01 O pt o to uc nd 00 (9D ) 4 co 20 NO : 23 (1T ) NO : 8 P- 1+ Q- 1 R1 lti LS TO Y T6 PL 76 DE MY (X) PR OD 5 14 2 110 0 (Q) QT Y: H1 BA TC H 3G O SR mi AM 998 LO T (6P ) Se 021 (G) AM 99 8 D/C : 01 21 00 (9D ) 00 SR 21 : 4 20 23 O (6P ) (X) PR OD O NO : (1T ) 11 00 LO T 14 2 5 NO : 12 3G BA TC H H1 (Q) QT Y: Se SR m A ico M nd O uc pt to o rs NO 44 Mu 210 44 ). NO : 12 see labe N ED Bin Bin 1: Bin 2: P-1 3: Q-1 -20 ML -20 2 Te 2a 220 mp 3 240 ST Ad 260 C R C R0 diti R ona C RT PA 77 l TE CK VA XT R: TIO GR OU P: U Muster A (G) l k, C GR OU P: Muster L VE LE code (RH blan If y bar . idit RH hum 60% e tive d C/ kag rela are 30 E S s _ < infr pac OR of tainITIV 90% to ak urs CT < e). or urs ted (pe ons con NS Ho g urs SE DU Ho and jec diti cod C, 72 sin Ho urs e 5 bag E ON 48 C sub e Ho con ces is UR 24 6 dat e MIC 40 be tim h C e ThISTSE pro < tory tim . or t wit 23 tim e at t will C) or fac MO . Flo al len tim TO s at or at Flo d or iva ure el nth s tha OP ntic Flo 4 if: rea Flo , lab ow mo ice equ ide 5 ced el e 5a is el ingen bel or 24 pro 6 Lev e dev, : el cod e , unt wh Lev el re ow see bag Lev l dat re mo bak e bar ned Lev refl istu 10% re led tim sea for istu ore> re ope se Mo see 3 istu is or . sea is Mo nk, bef istu pha nk, Flo , rd -03 Mo in RH bla Mo orbag bla hin ingCa TD life (if ar If wit t. vapp. 10%baktor J-S this elf Ye ar eks , _ < ed ica med, C 1 urs Ye erow tem Sh at uire not > y 1 WeHo unt DE Aft Ind 1. e 4 uire refl red req 2. bod Mo e ity is /JE tim 168 req : e 2b a) Sto es tim or mid is IPC or tim e vic b) ned or Hu Flo tim ing ce or De e 2a Flo a) ope or 3. b) bakren Flo e 1 l dat Flo If 2 el refe tim 2a 4. el sea 3 Lev g el and Lev el re Ba te Lev re Lev istu Da re istu re Mo istu Mo istu Mo Mo DE MY Barcode label ED Bin Bin 1: Bin 2: P-1 3: Q-1 -20 ML -20 2 Tem 2a 220 3 240 p ST Ad 260 C R C R0 diti R ona C RT PA 77 l TE CK VA XT R: Barcode label Packing Sealing label 2010-05-12 13 OHA02044 LS T676, LA T676, LO T676, LY T676 Revision History: 2010-05-12 Previous Version: 2009-12-07 Page Subjects (major changes since last revision) Date of change 2 ordering codes for amber changed 2009-06-15 5 wavelength Groups for amber added 2009-06-15 1, 9 additional information 2009-12-07 4, 5 Dominant wavelengt (amber) corrected 2010-05-12 Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components10) page 15 may only be used in life-support devices or systems11) page 15 with the express written approval of OSRAM OS. 2010-05-12 14 LS T676, LA T676, LO T676, LY T676 Funoten: 1) Helligkeitswerte werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 11% ermittelt. 2) Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. 3) Die LED kann kurzzeitig in Sperrichtung betrieben werden. 4) RthJA ergibt sich bei Montage auf PC-Board FR 4 (Padgroe 16 mm 2 je Pad) 5) Wellenlangen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 1 nm ermittelt. 6) Spannungswerte werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,1 V ermittelt. 7) Im gestrichelten Bereich der Kennlinien muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden 8) Mae werden wie folgt angegeben: mm (inch) 9) Gehause fur Wellenloten (TTW) geeignet 10) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. 11) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. Remarks: 1) Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of 11%. 2) 3) 4) 5) 6) 2010-05-12 7) In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. 8) Dimensions are specified as follows: mm (inch) Package suitable for TTW-soldering A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 9) 10) 11) Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 15 Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. Driving the LED in reverse direction is suitable for short term application. RthJA results from mounting on PC board FR 4 (pad size 16 mm 2 per pad) Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of 1 nm. Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V. Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.