Solar Flasher Model GSK-1005 This is a blinking light circuit power by the energy of the sun. Utilizing a solar panel to convert the suns energy two LED's will alternatively blink and the blinking speed may be adjusted. Figure 1 Installing components Technical Specifications n Power Source: Solar panel n Solar panel: 4 VDC, 60 mA n Adjust flashing speed with potentiometer n PCB dimensions: 1.39 x 1.27 inches Operating Principles TR1 and TR2 form a multi vibration frequency circuit when assembled and work in conjunction with LED1 and LED2 to alternatively turn the LED's on and off. When TR1 is powered, LED1 will light and LED2 is off. When TR2 is powered, LED2 will light and LED 1 is off. The blinking speed is controlled through VR10K, R2, R3, C1 and C2. R1 and R4 act to reduce voltage to the LED. Circuit Assembly Please refer to Figures 1, 2, and 3 for aid in component placement. It is recommended to start with lower components i.e. diodes, resisters, electrolyte capacitors, and transistors. Be careful to check polarity with Figure 3 before soldering. If a problem is detected it is best to use a desoldering pump or desoldering braids to remove component. This will minimize potential damage to the printed circuit board. Note This solar panel will not convert fluorescent light to DC voltage. Special handling instruction Extra care must be taken to ensure proper installation of solar panel to PCB. Severe damage may occur to the solar panel if the positive and negative poles are short circuited when soldering. Testing Turn the solar panel to receive the maximum sunlight. The LED1 and LED2 will work alternatively providing the solar panel is receiving sufficient sunlight. Adjust the trimmer potentiometer VR10K; blinking speed should vary according to adjustment. Electronic Kit Set for Hobby & Education Troubleshooting This circuit has only a few components. The main cause of problems come from misplaced components or faulty soldering. Utilize Figure 3 to ensure proper placement/polarity and then check solder points for connectivity. Figure 2 LED flasher 2 dot circuit Figure 3 Connecting circuits GSK-1005 www.globalspecialties.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Global Specialties: GSK-1005