Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. FXLA104 Low-Voltage Dual-Supply 4-Bit Voltage Translator with Configurable Voltage Supplies and Signal Levels, 3-State Outputs, and Auto Direction Sensing Features Description Bi-Directional Interface between Two Levels: from 1.1V to 3.6V Fully Configurable: Inputs and Outputs Track VCC Outputs Switch to 3-State if Either VCC is at GND Control Input (/OE) Referenced to VCCA Voltage Direction Control Not Necessary ESD Protection Exceeds: - 8kV HBM (per JESD22-A114 & Mil Std 883e 3015.7) - 2kV CDM (per ESD STM 5.3) Non-Preferential Power-Up; Either VCC May Be Powered Up First Power-Off Protection Bus-Hold on Data Inputs Eliminates the Need for Pull-Up Resistors; Do Not Use Pull-Up Resistors on A or B Ports Available in 16-Terminal UMLP (1.8mm x 2.6mm) and 12-Terminal, Quad UMLP, 1.8 x 1.8mm Packages 100Mbps Throughput when Translating Between 1.8V and 2.5V The FXLA104 is a configurable dual-voltage supply translator for both uni-directional and bi-directional voltage translation between two logic levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. The A port tracks the VCCA level and the B port tracks the VCCB level. This allows for bi-directional voltage translation over a variety of voltage levels: 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V. The device remains in three-state as long as either VCC=0V, allowing either VCC to be powered up first. Internal power-down control circuits place the device in 3-state if either VCC is removed. The /OE input, when HIGH, disables both the A and B ports by placing them in a 3-state condition. The /OE input is supplied by VCCA. The FXLA104 supports bi-directional translation without the need for a direction control pin. The two ports of the device have auto-direction sense capability. Either port may sense an input signal and transfer it as an output signal to the other port. Applications Cell Phone, PDA, Digital Camera, Portable GPS Ordering Information Part Number FXLA104UMX FXLA104UM12X Operating Temperature Range -40 to 85C (c) 2009 Fairchild Semiconductor Corporation FXLA104 * Rev. 1.0.9 Top Mark Package XJ 16-Terminal UMLP 1.8 x 2.6mm Package XJ 12-Terminal, Quad UMLP, 1.8 x 1.8mm Package Packing Method 5K Units Tape and Reel www.fairchildsemi.com FXLA104 -- Low-Voltage Dual-Supply 4-Bit Voltage Translator July 2012 B0 B1 B2 B3 12 11 10 9 VCCB 13 8 /OE NC 14 7 GND NC 15 6 GND VCCA 16 5 NC 1 2 3 4 A0 A1 A2 A3 Figure 1. 16-Pin UMLP (Top Through View) Figure 2. 12-Pin UMLP (Top Through View) Pin Definitions 16 Pin # 12 Pin # Name 1 3 A0 A-Side Inputs or 3-State Outputs 2 4 A1 A-Side Inputs or 3-State Outputs 3 5 A2 A-Side Inputs or 3-State Outputs 4 6 A3 A-Side Inputs or 3-State Outputs NC No Connect 5 Description 6,7 7 GND Ground 8 8 /OE Output Enable Input 9 9 B3 B-Side Inputs or 3-State Outputs 10 10 B2 B-Side Inputs or 3-State Outputs 11 11 B1 B-Side Inputs or 3-State Outputs 12 12 B0 B-Side Inputs or 3-State Outputs 13 1 VCCB 2 VCCA 14,15 16 NC (c) 2009 Fairchild Semiconductor Corporation FXLA104 * Rev. 1.0.9 FXLA104 -- Low-Voltage Dual-Supply 4-Bit Voltage Translator Pin Configuration B-Side Power Supply No Connect A-Side Power Supply www.fairchildsemi.com 2 Figure 3. Functional Diagram Function Table Control Outputs /OE LOW Logic Level Normal Operation HIGH Logic Level 3-State (c) 2009 Fairchild Semiconductor Corporation FXLA104 * Rev. 1.0.9 FXLA104 -- Low-Voltage Dual-Supply 4-Bit Voltage Translator Functional Diagram www.fairchildsemi.com 3 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC Parameter Supply Voltage VI DC Input Voltage VO (2) IIK IOK IOH/IOL ICC TSTG PD ESD Conditions Output Voltage DC Input Diode Current DC Output Diode Current Min. Max. VCCA -0.5 4.6 VCCB -0.5 4.6 I/O Ports A and B -0.5 4.6 Control Input (/OE) -0.5 4.6 Output 3-State -0.5 4.6 Output Active (An) -0.5 VCCA +0.5 Output Active (Bn) -0.5 VCCB +0.5 VIN<0V -50 VO<0V -50 VO>VCC +50 DC Output Source/Sink Current -50 DC VCC or Ground Current (per Supply Pin) Storage Temperature Range -65 Power Dissipation Electrostatic Discharge Capability Unit V V V mA mA +50 mA 100 mA +150 C 17 mW Human Body Model (per JESD22A114 & Mil Std 883e 3015.7) 8 Charged Device Model (per ESD STM 5.3) 2 kV Notes: 1. IO absolute maximum ratings must be observed. 2. All unused inputs and input/outputs must be held at VCCi or GND. FXLA104 -- Low-Voltage Dual-Supply 4-Bit Voltage Translator Absolute Maximum Ratings Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol Parameter VCC Power Supply VIN Input Voltage TA Operating Temperature, Free Air dt/dV Conditions Operating VCCA or VCCB Ports A and B Control Input (/OE) Min. Max. Unit 1.1 3.6 V 0 3.6 V 0 VCCA V -40 +85 C ns/V Minimum Input Edge Rate VCCA/B = 1.1 to 3.6V 10 JA Thermal Resistance: Junction-to-Ambient UMLP-16 315 UMLP-12 300 JC Thermal Resistance: Junction-to-Case UMLP-16 155 UMLP-12 165 (c) 2009 Fairchild Semiconductor Corporation FXLA104 * Rev. 1.0.9 C/W C/W www.fairchildsemi.com 4 FXL translators offer an advantage in that either VCC may be powered up first. This benefit derives from the chip design. When either VCC is at 0V, outputs are in a high-impedance state. The control input (/OE) is designed to track the VCCA supply. A pull-up resistor tying /OE to VCCA should be used to ensure that bus contention, excessive currents, or oscillations do not occur during power-up or power-down. The size of the pull-up resistor is based upon the current-sinking capability of the device driving the /OE pin. The recommended power-down sequence is: 1. 2. 3. Pull-Up/Pull-Down Resistors Do not use pull-up or pull-down resistors. This device has bus-hold circuits: pull-up or pull-down resistors are not recommended because they interfere with the output state. The current through these resistors may exceed the hold drive, II(HOLD) and/or II(OD) bus-hold currents, resulting in data transition and/or autodirection sensing failures. The bus-hold feature eliminates the need for extra resistors. The recommended power-up sequence is: 1. 2. 3. Apply power to the first VCC. Apply power to the second VCC. Drive the /OE input LOW to enable the device. (c) 2009 Fairchild Semiconductor Corporation FXLA104 * Rev. 1.0.9 Drive /OE input HIGH to disable the device. Remove power from either VCC. Remove power from other VCC. FXLA104 -- Low-Voltage Dual-Supply 4-Bit Voltage Translator Power-Up/Power-Down Sequence www.fairchildsemi.com 5 TA=-40 to 85C Symbol Parameter Conditions Data Inputs An Control Pin /OE VIHA VCCB (V) Data Inputs Bn Min. 2.70 to 3.60 2.00 2.30 to 2.70 1.60 1.65 to 2.30 1.10 to 3.60 .65xVCCA 1.40 to 1.65 .65xVCCA 1.10 to 1.40 High-Level Input Voltage VIHB VCCA (V) Typ. .90xVCCA 2.70 to 3.60 2.00 2.30 to 2.70 1.60 1.10 to 3.60 1.65 to 2.30 .65xVCCB 1.40 to 1.65 .65xVCCB 1.10 to 1.40 .90xVCCB V .80 2.30 to 2.70 Data Inputs An Control Pin /OE VILB VOHA VOHB VOLA VOLB .35xVCCA 1.40 to 1.65 .35xVCCA Data Inputs Bn .80 2.30 to 2.70 .70 .35xVCCB 1.40 to 1.65 .35xVCCB 1.10 to 1.40 .10xVCCB High-Level Output Voltage(3) IOH=-4A 1.10 to 3.60 1.10 to 3.60 VCCA -.4 IOH=-4A 1.10 to 3.60 1.10 to 3.60 VCCB - .4 Low-Level Output Voltage(3) IOL=4A 1.10 to 3.60 1.10 to 3.60 .4 IOL=4A 1.10 to 3.60 1.10 to 3.60 .4 3.00 V .10xVCCA 2.70 to 3.60 1.10 to 3.60 1.65 to 2.30 VIN=0.8V II(HOLD) .70 1.65 to 2.30 1.10 to 3.60 1.10 to 1.40 Low-Level Input Voltage Units V 2.70 to 3.60 VILA Max. 3.00 75.0 V FXLA104 -- Low-Voltage Dual-Supply 4-Bit Voltage Translator DC Electrical Characteristics V VIN=2.0V 3.00 3.00 -75.0 VIN=0.7V 2.30 2.30 45.0 VIN=1.6V 2.30 2.30 -45.0 Bus-Hold Input Minimum VIN=0.57V Drive Current VIN=1.07V 1.65 1.65 25.0 1.65 1.65 -25.0 VIN=0.49V 1.40 1.40 11.0 VIN=0.91V 1.40 1.40 -11.0 VIN=0.11V 1.10 1.10 4.0 VIN=0.99V 1.10 1.10 -4.0 V A Note: 3. This is the output voltage for static conditions. Dynamic drive specifications are given in the Dynamic Output Electrical Characteristics table. Continued on following page... (c) 2009 Fairchild Semiconductor Corporation FXLA104 * Rev. 1.0.9 www.fairchildsemi.com 6 TA=-40 to 85C. Symbol II(ODH) II(ODL) II IOFF IOZ ICCA/B ICCZ Parameter Bus-Hold Input Overdrive High Current(4) Bus-Hold Input Overdrive Low (5) Current Input Leakage Current Power-Off Leakage Current 3-State Output Leakage Quiescent Supply Current(6, 7) ICCA Quiescent Supply Current ICCB Conditions VCCA (V) VCCB (V) Min. Max. Units 3.60 3.60 450.0 2.70 2.70 300.0 1.95 1.95 200.0 1.60 1.60 120.0 1.40 1.40 80.0 3.60 3.60 -450.0 2.70 2.70 -300.0 1.95 1.95 -200.0 1.60 1.60 -120.0 1.40 1.40 -80.0 1.10 to 3.60 3.60 1.0 An VO=0V to 3.6V 0 3.60 2.0 Bn VO=0V to 3.6V 3.60 0 2.0 An, Bn VO=0V or 3.6V, /OE=VIH 3.60 3.60 5.0 An VO=0V or 3.6V, /OE=GND 3.60 0 5.0 Bn VO=0V or 3.6V, /OE=GND 0 3.60 5.0 VI=VCCI or GND; IO=0, /OE=GND 1.10 to 3.60 1.10 to 3.60 10.0 A VI=VCCI or GND; IO=0, /OE=VIH 1.10 to 3.60 1.10 to 3.60 10.0 A VI=VCCB or GND; IO=0 B-to-A Direction, /OE=GND 0 1.10 to 3.60 -10.0 VI=VCCA or GND; IO=0 A-to-B Direction 1.10 to 3.60 0 10.0 VI=VCCA or GND; IO=0, A-to-B Direction, 1.10 to 3.60 /OE=GND 0 -10.0 Data Inputs An, Bn Data Inputs An, Bn Control Inputs /OE, VI=VCCA or GND VI=VCCB or GND; IO=0 B-to-A Direction A A A A A FXLA104 -- Low-Voltage Dual-Supply 4-Bit Voltage Translator DC Electrical Characteristics (Continued) A 0 A 1.10 to 3.60 10.0 Notes: 4. An external drive must source at least the specified current to switch LOW-to-HIGH. 5. An external drive must source at least the specified current to switch HIGH-to-LOW. 6. VCCI is the VCC associated with the input side. 7. Reflects current per supply, VCCA or VCCB. (c) 2009 Fairchild Semiconductor Corporation FXLA104 * Rev. 1.0.9 www.fairchildsemi.com 7 A Port (An) Output Load: CL=15pF, RL M (CI/O=4pF), TA=-40 to 85C Symbol Parameter VCCA=3.0V to 3.6V Typ. Max. VCCA=2.3V to 2.7V Typ. VCCA=1.65V to 1.95V Max. Typ. Max VCCA=1.4V to 1.6V Typ. VCCA=1.1V to 1.3V Max. Typ. Units trise Output Rise Time A Port(9) 3.0 3.5 4.0 5.0 7.5 ns tfall Output Fall Time A (10) Port 3.0 3.5 4.0 5.0 7.5 ns IOHD Dynamic Output Current (9) High -11.4 -7.5 -4.7 -3.2 -1.7 mA IOLD Dynamic Output Current Low(10) +11.4 +7.5 +4.7 +3.2 +1.7 mA VCCB=1.1V to 1.3V Units B Port (Bn) Output Load: CL=15pF, RL M (CI/O=5pF), TA=-40 to 85C Symbol Parameter VCCB=3.0V to 3.6V Typ. Max. VCCB=2.3V to 2.7V Typ. VCCB=1.65V to 1.95V Max. Typ. Max VCCB=1.4V to 1.6V Typ. Max. Typ. trise Output Rise (9) Time B Port 3.0 3.5 4.0 5.0 7.5 ns tfall Output Fall Time B (10) Port 3.0 3.5 4.0 5.0 7.5 ns IOHD Dynamic Output Current (9) High -12.0 -7.9 -5.0 -3.4 -1.8 mA IOLD Dynamic Output Current Low(10) +12.0 +7.9 +5.0 +3.4 +1.8 mA FXLA104 -- Low-Voltage Dual-Supply 4-Bit Voltage Translator Dynamic Output Electrical Characteristic Notes: 8. Dynamic output characteristics are guaranteed, but not tested. 9. See Figure 8. 10. See Figure 9. (c) 2009 Fairchild Semiconductor Corporation FXLA104 * Rev. 1.0.9 www.fairchildsemi.com 8 VCCA = 3.0V to 3.6V, TA=-40 to 85C Symbol tPLH,tPHL Parameter VCCB=3.0V to 3.6V VCCB=2.3V to 2.7V VCCB=1.65V to 1.95V VCCB=1.4V to 1.6V VCCB=1.1V to 1.3V Units Min. Max. Min. Max. Min. Max Min. Max. Typ. A to B 0.2 4.0 0.3 4.2 0.5 5.4 0.6 6.8 6.9 ns B to A 0.2 4.0 0.2 4.1 0.3 5.0 0.5 6.0 4.5 ns tPZL,tPZH /OE to A, /OE to B 1.7 1.7 1.7 1.7 1.7 s tSKEW A Port, (11) B Port 0.5 0.5 0.5 1.0 1.0 ns VCCB=1.1V to 1.3V Units VCCA = 2.3V to 2.7V, TA=-40 to 85C Symbol tPLH,tPHL Parameter VCCB=3.0V to 3.6V VCCB=2.3V to 2.7V VCCB=1.65V to 1.95V VCCB=1.4V to 1.6V Min. Max. Min. Max. Min. Max Min. Max. Typ. A to B 0.2 4.1 0.4 4.5 0.5 5.6 0.8 6.9 7.0 ns B to A 0.3 4.2 0.4 4.5 0.5 5.5 0.5 6.5 4.8 ns tPZL,tPZH /OE to A, /OE to B 1.7 1.7 1.7 1.7 1.7 s tSKEW A Port, (11) B Port 0.5 0.5 0.5 1.0 1.0 ns VCCB=1.1V to 1.3V Units FXLA104 -- Low-Voltage Dual-Supply 4-Bit Voltage Translator AC Characteristics VCCA = 1.65V to 1.95V, TA=-40 to 85C Symbol tPLH,tPHL Parameter VCCB=3.0V to 3.6V VCCB=2.3V to 2.7V VCCB=1.65V to 1.95V VCCB=1.4V to 1.6V Min. Max. Min. Max. Min. Max Min. Max. Typ. A to B 0.3 5.0 0.5 5.5 0.8 6.7 0.9 7.5 7.5 ns B to A 0.5 5.4 0.5 5.6 0.8 6.7 1.0 7.0 5.4 ns tPZL,tPZH /OE to A, /OE to B 1.7 1.7 1.7 1.7 1.7 s tSKEW A Port, (11) B Port 0.5 0.5 0.5 1.0 1.0 ns Note: 11. Skew is the variation of propagation delay between output signals and applies only to output signals on the same port (An or Bn) and switching with the same polarity (LOW-to-HIGH or HIGH-to-LOW) (see Figure 11). Skew is guaranteed, but not tested. (c) 2009 Fairchild Semiconductor Corporation FXLA104 * Rev. 1.0.9 www.fairchildsemi.com 9 VCC=1.4V to 1.6V, TA=-40 to 85C Symbol tPLH,tPHL VCCB=3.0V to 3.6V Parameter VCCB=2.3V to 2.7V VCCB=1.65V to 1.95V VCCB=1.4V to 1.6V VCCB=1.1V to 1.3V Units Min. Max. Min. Max. Min. Max Min. Max. Typ. A to B 0.5 6.0 0.5 6.5 1.0 7.0 1.0 8.5 7.9 ns B to A 0.6 6.8 0.8 6.9 0.9 7.5 1.0 8.5 6.1 ns tPZL,tPZH /OE to A, /OE to B 1.7 1.7 1.7 1.7 1.7 s tSKEW A Port, (12) B Port 1.0 1.0 1.0 1.0 1.0 ns Units VCCA=1.1V to 1.3V, TA=-40 to 85C Symbol tPLH,tPHL tPZL,tPZH tSKEW VCCB=3.0V to 3.6V VCCB=2.3V to 2.7V VCCB=1.65V to 1.95V VCCB=1.4V to 1.6V VCCB=1.1V to 1.3V Typ. Typ. Typ. Typ. Typ. A to B 4.6 4.8 5.4 6.2 9.2 ns B to A 6.8 7.0 7.4 7.8 9.1 ns Parameter /OE to A, /OE to B 1.7 1.7 1.7 1.7 1.7 s A Port, B Port(12) 1.0 1.0 1.0 1.0 1.0 ns Note: 12. Skew is the variation of propagation delay between output signals and applies only to output signals on the same port (An or Bn) and switching with the same polarity (LOW-to-HIGH or HIGH-to-LOW) (see Figure 11). Skew is guaranteed, but not tested. (c) 2009 Fairchild Semiconductor Corporation FXLA104 * Rev. 1.0.9 FXLA104 -- Low-Voltage Dual-Supply 4-Bit Voltage Translator AC Characteristics (Continued) www.fairchildsemi.com 10 TA=-40 to 85C VCCB=3.0V to 3.6V VCCB=2.3V to 2.7V VCCB=1.65V to 1.95V VCCB=1.4V to 1.6V VCCB=1.1V to 1.3V Min. Min. Min. Min. Typ. VCCA=3.00V to 3.60V 140 120 100 80 40 Mbps VCCA=2.30V to 2.70V 120 120 100 80 40 Mbps VCCA=1.65V to 1.95V 100 100 80 60 40 Mbps VCCA=1.40V to 1.60V 80 80 60 60 40 Mbps Typ. Typ. Typ. Typ. Typ. 40 40 40 40 40 VCCA VCCA=1.10V to 1.30V Units Mbps Notes: 13. Maximum data rate is guaranteed, but not tested. 14. Maximum data rate is specified in megabits per second (see Figure 10). It is equivalent to two times the F-toggle frequency, specified in megahertz. For example, 100Mbps is equivalent to 50MHz. Capacitance Symbol CIN Parameter Conditions Input Capacitance Control Pin (/OE) An CI/O Input/Output Capacitance Cpd Power Dissipation Capacitance (c) 2009 Fairchild Semiconductor Corporation FXLA104 * Rev. 1.0.9 Bn VCCA=VCCB=GND VCCA=VCCB=3.3V, /OE=VCCA VCCA=VCCB=3.3V, VI=0V or VCC, f=10MHz TA=+25C Typical Units 3 pF 4 5 25 FXLA104 -- Low-Voltage Dual-Supply 4-Bit Voltage Translator Maximum Data Rate(13, 14) pF pF www.fairchildsemi.com 11 hold." "Static Mode" is when only the bus hold drives the channel. The bus hold can be over ridden in the event of a direction change. The strong driver allows the FXLA104 to quickly charge and discharge capacitive transmission lines during dynamic mode. Static mode conserves power, where ICC is typically < 5A. The FXLA104 I/O architecture benefits the end user, beyond level translation, in the following three ways: Auto Direction without an external direction pin. Drive Capacitive Loads. Automatically shifts to a higher current drive mode only during "Dynamic Mode" or HL / LH transitions. Bus Hold Minimum Drive Current Lower Power Consumption. Automatically shifts to low-power mode during "Static Mode" (no transitions), lowering power consumption. Specifies the minimum amount of current the bus hold driver can source/sink. The bus hold minimum drive current (IIHOLD) is VCC dependent and guaranteed in the DC Electrical tables. The intent is to maintain a valid output state in a static mode, but that can be overridden when an input data transition occurs. The FXLA104 does not require a direction pin. Instead, the I/O architecture detects input transitions on both side and automatically transfers the data to the corresponding output. For example, for a given channel, if both A and B side are at a static LOW, the direction has been established as A B, and a LH transition occurs on the B port; the FXLA104 internal I/O architecture automatically changes direction from A B to B A. Bus Hold Input Overdrive Drive Current Specifies the minimum amount of current required (by an external device) to overdrive the bus hold in the event of a direction change. The bus hold overdrive (IIODH, IIODL) is VCC dependent and guaranteed in the DC Electrical tables. During HL / LH transitions, or "Dynamic Mode," a strong output driver drives the output channel in parallel with a weak output driver. After a typical delay of approximately 10ns - 50ns, the strong driver is turned off, leaving the weak driver enabled for holding the logic state of the channel. This weak driver is called the "bus (c) 2009 Fairchild Semiconductor Corporation FXLA104 * Rev. 1.0.9 Dynamic Output Current The strength of the output driver during LH / HL transitions is referenced on page 8, Dynamic Output Electrical Characteristics, IOHD, and IOLD. FXLA104 -- Low-Voltage Dual-Supply 4-Bit Voltage Translator I/O Architecture Benefit www.fairchildsemi.com 12 VCC TEST SIGNAL DUT C1 R1 Figure 4. Test Circuit Table 1. Table 2. AC Test Conditions Test Input Signal Output Enable Control tPLH, tPHL Data Pulses 0V tPZL 0V HIGH to LOW Switch tPZH VCCI HIGH to LOW Switch AC Load VCCo C1 R1 1.2V 0.1V 15pF 1M 1.5V 0.1V 15pF 1M 1.8V 0.15V 15pF 1M 2.5V 0.2V 15pF 1M 3.3V 0.3V 15pF 1M DATA IN Vmi tpxx FXLA104 -- Low-Voltage Dual-Supply 4-Bit Voltage Translator Test Diagrams VCCI GND tpxx DATA OUT Vmo VCCO Figure 5. Waveform for Inverting and Non-Inverting Functions Notes: 15. Input tR = tF = 2.0ns, 10% to 90%. 16. Input tR = tF = 2.5ns, 10% to 90%, at VI = 3.0V to 3.6V only. (c) 2009 Fairchild Semiconductor Corporation FXLA104 * Rev. 1.0.9 www.fairchildsemi.com 13 Notes: 17. Input tR = tF = 2.0ns, 10% to 90%. 18. Input tR = tF = 2.5ns, 10% to 90%, at VI = 3.0V to 3.6V only. FXLA104 -- Low-Voltage Dual-Supply 4-Bit Voltage Translator Figure 6. 3-State Output Low Enable Time for Low Voltage Logic Figure 7. 3-State Output High Enable Time for Low Voltage Logic Notes: 19. Input tR = tF = 2.0ns, 10% to 90%. 20. Input tR = tF = 2.5ns, 10% to 90%, at VI = 3.0V to 3.6V only. Table 3. Test Measure Points Symbol VMI VDD (21) VCCI /2 VMO VCCo /2 VX 0.9 x VCCo VY 0.1 x VCCo Note: 21. VCCI=VCCA for control pin /OE or VMI(VCCA/2). (c) 2009 Fairchild Semiconductor Corporation FXLA104 * Rev. 1.0.9 www.fairchildsemi.com 14 VOH 80% x VCCO VOUT 20% x VCCO VOL Time IOHD (CL + CI / O ) x VOUT ( 20 % - 80 %) * VCCO = (CL + CI / O ) x t t RISE Figure 8. Active Output Rise Time and Dynamic Output Current High VOH tfall 80% x VCCO VOUT 20% x VCCO VOL Time IOLD (CL + CI / O ) x VOUT (80% - 20%) * VCCO = (CL + CI / O ) x t FALL t FXLA104 -- Low-Voltage Dual-Supply 4-Bit Voltage Translator trise Figure 9. Active Output Fall Time and Dynamic Output Current Low tW VCCI DATA IN VCCI/2 VCCI/2 GND Maximum Data Rate, f = 1/tW Figure 10. Maximum Data Rate VCCO DATA OUTPUT Vmo Vmo GND tskew tskew VCCO DATA OUTPUT Vmo Vmo GND Figure 11. Output Skew Time Note: 22. tSKEW = (tpHLmax - tpHLmin) or (tpLHmax - tpLHmin) (c) 2009 Fairchild Semiconductor Corporation FXLA104 * Rev. 1.0.9 www.fairchildsemi.com 15 1.80 0.10 C A 2.10 B 0.563 (15X) 0.663 2X 1 2.60 2.90 PIN#1 IDENT 0.40 0.10 C TOP VIEW 0.10 C 0.55 MAX. 0.08 C 0.225 (16X) 2X RECOMMENDED LAND PATTERN 0.152 TERMINAL SHAPE VARIANTS SEATING C PLANE 0.05 0.00 0.40 0.60 SIDE VIEW 0.15 0.25 0.45 0.35 15X 0.10 0.10 PIN 1 5 0.30 15X 0.50 0.15 0.25 NON-PIN 1 Supplier 1 9 0.40 0.30 0.50 0.15 0.25 1 0.15 15X 0.25 PIN 1 PIN#1 IDENT 16 0.55 0.45 BOTTOM VIEW 0.3015X 0.50 NON-PIN 1 Supplier 2 13 FXLA104 -- Low-Voltage Dual-Supply 4-Bit Voltage Translator Physical Dimensions 0.25 0.15 0.10 C A B 0.05 C R0.20 PACKAGE EDGE NOTES: A. PACKAGE DOES NOT FULLY CONFORM TO JEDEC STANDARD. B. DIMENSIONS ARE IN MILLIMETERS. C. DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994. D. LAND PATTERN RECOMMENDATION IS BASED ON FSC DESIGN ONLY. E. DRAWING FILENAME: MKT-UMLP16Arev4. F. TERMINAL SHAPE MAY VARY ACCORDING TO PACKAGE SUPPLIER, SEE TERMINAL SHAPE VARIANTS. LEAD OPTION 1 SCALE : 2X LEAD OPTION 2 SCALE : 2X Figure 12. 16-Lead, UMLP, QUAD, Ultra-Thin MLP, 1.8 X 2.6mm Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. (c) 2009 Fairchild Semiconductor Corporation FXLA104 * Rev. 1.0.9 www.fairchildsemi.com 16 FXLA104 -- Low-Voltage Dual-Supply 4-Bit Voltage Translator Physical Dimensions 1.80 0.10 C A (11X) 2.10 B 0.563 0.588 2X 1 1.80 0.40 2.10 PIN#1 IDENT TOP VIEW 0.55 MAX. 0.10 C 0.10 C (12X) 0.20 2X RECOMMENDED LAND PATTERN 0.152 0.45 0.35 0.08 C 0.05 0.00 0.10 SEATING C PLANE SIDE VIEW 0.10 0.10 DETAIL A SCALE : 2X NOTES: 0.35 (11X) 0.45 3 A. PACKAGE DOES NOT FULLY CONFORM TO JEDEC STANDARD. B. DIMENSIONS ARE IN MILLIMETERS. 6 0.40 DETAIL A C. DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994. 1 PIN#1 IDENT 12 9 D. LAND PATTERN RECOMMENDATION IS BASED ON FSC DESIGN ONLY. 0.25 0.15 (12X) BOTTOM VIEW 0.10 C A B 0.05 C E. DRAWING FILENAME: MKT-UMLP12Arev4. PACKAGE EDGE LEAD OPTION 1 SCALE : 2X LEAD OPTION 2 SCALE : 2X Figure 13. 12-Lead, UMLP, QUAD, JEDEC MO-252 1.8 x 1.8mm Package Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. (c) 2009 Fairchild Semiconductor Corporation FXLA104 * Rev. 1.0.9 www.fairchildsemi.com 17 FXLA104 -- Low-Voltage Dual-Supply 4-Bit Voltage Translator (c) 2009 Fairchild Semiconductor Corporation FXLA104 * Rev. 1.0.9 www.fairchildsemi.com 18 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Fairchild Semiconductor: FXLA104UM12X_F106 FXLA104UMX_F106