08602.0-00 - STEGO - Datasheet.Live

Technical Data

Ventilating

FF018/2-11/US

Specifications are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/ buyer in its final application.

STEGO, Inc. · 1395 South Marietta Parkway · Building 800 · Marietta, GA 30067 · Tel: (770) 984-0858 · Fax: (770) 984-0615

Toll free: 1-888-783-4611 (US & Canada only) · www.stegousa.com

Very low noise

Minimal mounting depth

Functional design

Time-saving installation

Weather and UV resistant

Filter fans are used to provide an optimum climate in enclosures. The interior temperature of

an enclosure can be reduced by channeling cooler filtered outside air into the enclosure thus

expelling heated internal air. The resulting air flow prevents formation of localized heat pock-

ets and protects the electronic components from overheating. The plastic used for the hood of

this filter fan series is highly weather resistant, as well as impact and UV light resistant.

Axial fan, ball bearing service life min. 50,000h at 77°F (25°C) and 65% RH

aluminum fan body, plastic rotor

Connection 2 wires w/ cage clamps, AWG 14 (2.5mm²), length 4” (100mm)

Housing (filter fan and exhaust filter) Plastic, UL 94V-0, light grey

Hood (filter fan and exhaust filter) Plastic, UL 94V-0, light grey;

weather and UV light resistant according to UL 746C (f1)

Mounting frame with double-sided industrial adhesive for mounting to the

outside of enclosure; certain operating circumstances may

make the additional use of screws necessary; cut-out

template included

Filter media rating G4 acc. to DIN EN 779, filtering degree 94%

Filter material synthetic fiber with progressive construction, temperature

resistant to 212°F, self-extinguishing class F1;

moisture resistant to 100% RH, reusable - can be cleaned by

washing or vacuuming

Operating / Storage temperature +14 to +158°F (-10 to +70°C) / -40 to +158°F (-40 to 70°C)

Protection class I(grounded)

Protection type IP55 (according to VDE), UL Type 1

Note: Using fine filter mat F5 increases the protection to UL Type 12 but reduces the air flow

Part No. Operating

voltage

Air volume,

free blowing

Air volume

with

exhaust filter

Power

consumption

Average noise level

(DIN EN ISO 4871)

Mounting

depth

Enclosure

cut-out

Weight

(approx.) Approvals

01800.0-00 230VAC, 50Hz1) 12 cfm (21m³/h ) 9 cfm (16m³/h) 13W 31dB (A) 1.8” (45mm) 3.8 x 3.8” 1.3 lbs. (0.6kg) UL File No. E234324, VDE

01800.0-01 120VAC, 60Hz 14 cfm (24m³/h) 11 cfm (18m³/h) 13W 31dB (A) 1.8” (45mm) 3.8 x 3.8” 1.3 lbs. (0.6kg) UL File No. E234324

01801.0-00 230VAC, 50Hz1) 32 cfm (55m³/h) 25 cfm (42m³/h) 15W 40dB (A) 2.3” (58mm) 4.9 x 4.9” 2.2 lbs. (1.0kg) UL File No. E234324, VDE

01801.0-01 120VAC, 60Hz 37 cfm (63m³/h) 28 cfm (48m³/h) 15W 40dB (A) 2.3” (58mm) 4.9 x 4.9” 2.2 lbs. (1.0kg) UL File No. E234324

01802.0-00 230VAC, 50Hz1) 60 cfm (102m³/h) 40 cfm (68m³/h) 15W 39dB (A) 3.4” (86mm) 6.9 x 6.9” 2.9 lbs. (1.3kg) UL File No. E234324, VDE

01802.0-01 120VAC, 60Hz 69 cfm (117m³/h) 46 cfm (78m³/h) 15W 39dB (A) 3.4” (86mm) 6.9 x 6.9” 2.9 lbs. (1.3kg) UL File No. E234324

Special features

The self-adhesive seal of the mounting frame prevents dust and water from entering the cabinet.

Functional design of the intake and exhaust fan hoods very effectively prevents direct infiltration of falling water and dust. The advantage is that the filter mat does not rapidly become contaminated with dirt

and therefore does not need to be exchanged as often.

The air channeling makes the filter fan particularly quiet in operation.

All filter fan models are also available with integrated airflow monitor.

The direction of air flow can easily be switched by reversing the axial fan.

EMC versions and other voltages are available upon request.

FF 018 Filter Fan 14 - 69 cfm

Enclosure ventilation using a filter fan and exhaust filter

1) air volume increases by 15% when operating 230VAC filter fans at 60Hz

Ventilating

FF 018 Filter Fan 14 - 69 cfm

FF018/2-11/US

Specifications are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/ buyer in its final application.

STEGO, Inc. · 1395 South Marietta Parkway · Building 800 · Marietta, GA 30067 · Tel: (770) 984-0858 · Fax: (770) 984-0615

Toll free: 1-888-783-4611 (US & Canada only) · www.stegousa.com

Time-saving assembly and maintenance

STEGO's filter fans are easily installed by one person from outside the cabinet.

1.) Make cut-out in the cabinet wall. The cut edge of the cabinet opening should be free of

dirt, filings and grease. A template for the enclosure cut-out is included with the filter fan.

2.) Remove protective film from the sealing strips on the mounting frame. Press mounting

frame into the cabinet opening. The frame stays permanently in the cabinet.

3.) Electrically connect the axial fan using the cage clamp connectors. Push the unit into the

mounting frame. Affix using screws if necessary.

4.) Insert the filter mat in the hood. Clip on. Finished.

To change the filter mat, simply remove the filter hood, insert the new mat and snap the hood

back again. No tools are required. Maintenance of the fan can easily be performed without

removing the mounting frame (2).

Installation sketch

Dimensional Drawing

5.1”

5.3”

1.8”

3.8”

6.2”

6.7”

2.3”

4.9”

8.2”

8.9”

3.4”

6.9”

1.4” 1.6” 2.0”

Filter mat 3.5 x 3.5” (89 x 89mm) 4.6 x 4.6” (118 x 118mm) 6.6 x 6.6” (168 x 168mm)

G4 (1 packing unit = 3 pcs.) Part No. 08600.0-00 Part No. 08601.0-00 Part No. 08602.0-00

F5 (1 packing unit = 3 pcs.) Part No. 08603.0-00 Part No. 08604.0-00 Part No. 08605.0-00

Part No. Mounting depth Enclosure cut-out Weight (approx.) Filter mat Protection type Approvals

11800.0-00 0.6” (16mm) 3.8 x 3.8” 0.6 lbs. (0.3kg) G4 acc. to DIN EN 779, filtering degree 94% IP55* UL File No. E234324

11801.0-00 0.6” (16mm) 4.9 x 4.9” 0.8 lbs. (0.4kg) G4 acc. to DIN EN 779, filtering degree 94% IP55* UL File No. E234324

11802.0-00 0.6” (16mm) 6.9 x 6.9” 1.3 lbs. (0.6kg) G4 acc. to DIN EN 779, filtering degree 94% IP55* UL File No. E234324

Drilling template for mounting frame

*according to VDE

5.4” (137 mm)

Ø1/8” (3mm)

7.4” (188 mm)

4.3” (109 mm)

Ø1/8” (3mm)

EF 118 Exhaust Filter

FM 086 Filter Mats