Part Number 855820 942.5 MHz SAW Filter Data Sheet Features * * * * * * * * * For EGSM applications Usable bandwidth 35 MHz Low loss No impedance matching required for operation at 50 Single-ended operation Ceramic Surface Mount Package (SMP) Small Size Hermetic RoHS compliant (2002/95/EC), Pb-free Pb Package Pin Configuration Surface Mount 3.00 x 3.00 x 1.22 mm SMP-12 Bottom View 1 2 3 6 5 4 1.22 NOM. 1.32 MAX. 0.69 3.00 0.75 Single-ended Configuration Pin No. Description 2 Input 5 Output 1,3,4,6 Case ground 1.50 3.00 0.75 0.60 Dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2 - 6m Ni plating Subject to change or obsolescence without notice Rev B 03/18 (c) TriQuint Semiconductor Page 1 of 6 Part Number 855820 942.5 MHz SAW Filter Data Sheet Electrical Specifications (1) Operating Temperature Range: (2) -20 to +70 C Parameter (3) Minimum Typical (4) Maximum Unit - 942.5 - MHz - 2 2.2 3.2 4 dB dB 20 12 5 20 10 32 18 18 28 26 - dB dB dB dB dB 6 - 10 50 50 - dB Center Frequency Insertion Loss 925 - 960 MHz (+15 to +35 oC) 925 - 960 MHz (-20 to +70 oC) Absolute Attenuation 10 - 905 MHz 905 - 915 MHz (-20 to +35 oC) 905 - 915 MHz (+35 to +70 oC) 980 - 2400 MHz 2400 - 3120 MHz Input/Output Return Loss 925 - 960 MHz Source Impedance (single-ended) (5) Load Impedance (single-ended) (5) Notes: 1. All specifications are based on the TriQuint test circuit shown below 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. This is the optimum impedance in order to achieve the performance shown Test Circuit: Actual matching values may vary due to PCB layout and parasitics 2 50 Single-ended Input Subject to change or obsolescence without notice 50 5 50 1,3,4,6 Rev B 03/18 No impedance matching required (c) TriQuint Semiconductor Page 2 of 6 Part Number 855820 942.5 MHz SAW Filter Data Sheet Electrical Specifications (1) Operating Temperature Range: (2) -40 to +85 C Parameter (3) Minimum Typical (4) Maximum Unit - 942.5 - MHz - 2.5 4.5 dB 20 12 4 20 10 32 18 18 28 26 - dB dB dB dB dB 6 - 10 50 50 - dB Center Frequency Insertion Loss 925 - 960 MHz Absolute Attenuation 10 - 905 MHz 905 - 915 MHz (-40 to +35 oC) 905 - 915 MHz (+35 to +85 oC) 980 - 2400 MHz 2400 - 3120 MHz Input/Output Return Loss 925 - 960 MHz Source Impedance (single-ended) (5) Load Impedance (single-ended) (5) Notes: 1. All specifications are based on the TriQuint test circuit shown below 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. This is the optimum impedance in order to achieve the performance shown Test Circuit: Actual matching values may vary due to PCB layout and parasitics 2 50 Single-ended Input Subject to change or obsolescence without notice 50 5 50 1,3,4,6 Rev B 03/18 No impedance matching required (c) TriQuint Semiconductor Page 3 of 6 Part Number 855820 942.5 MHz SAW Filter Data Sheet Typical Performance (at room temperature) Subject to change or obsolescence without notice Rev B 03/18 (c) TriQuint Semiconductor Page 4 of 6 Part Number 855820 942.5 MHz SAW Filter Data Sheet Matching Schematics Actual matching values may vary due to PCB layout and parasitics 2 50 Single-ended Input 50 5 No impedance matching required 50 1,3,4,6 Marking PCB Footprint 3.20 SQ .96 Marking code Sawtek logo 1.70 J JJJYM 1.27 ID dot .81 Date code .38 The date code consists of: day of the current year (Julian, 3 digits), last digit of the year (1 digit) and hour (2 digits) This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel 2.7 12.8 4.0 Sawtek logo O330 0.21 2.0 O1.5 A 1.75 5.5 ID dot O102 O20.2 O13.0 2.0 12.0 3.25 Direction of travel 1.4 Section A-A 3.25 4.0 A O1.5 Dimensions shown are nominal in millimeters Packaging quantity: 5000 units/reel Subject to change or obsolescence without notice Rev B 03/18 (c) TriQuint Semiconductor Page 5 of 6 Part Number 855820 942.5 MHz SAW Filter Data Sheet Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range Input Power (2:8 duty cycle, 20,000 hours @55oC) Symbol Minimum Maximum Unit T Tstg Pin -40 -40 +85 +85 +16 C C dBm o o Important Notes Warnings * * Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure RoHS Compliance * This product complies with EU directive 2002/95/EC (RoHS) Pb Solderability * Compatible with JESD22-B102, Pb-free process, 260C peak reflow temperature (see soldering profile) Links to Additional Technical Information PCB Layout Tips Qualification Flowchart S-Parameters Soldering Profile RoHS Information Other Technical Information TriQuint's liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. TriQuint does not accept any liability for applications, processes, circuits or assemblies, which are implemented using any TriQuint component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Subject to change or obsolescence without notice Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: info-product@tqs.com Web: www.triquint.com Rev B 03/18 Or contact one of our worldwide Network of sales offices, Representatives or distributors (c) TriQuint Semiconductor Page 6 of 6