Data sheet Pro-H CP T SNT 180W 24V 7,5A Weidmuller Interface GmbH & Co. KG Klingenbergstrae 26 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com The powerful new line of PRO-H power supplies - with ATEX and Class I Div. 2 approvals - is designed for use in Ex zones and the high-performance sector. High power reserves, a wide operating temperature range of -25 C to +70 C and high MTBF values (mean time between failures) of up to 1.8 million hours: these features ensure that the power supplies are suitable for all applications that require superior reliability (for example in the processing industry, power engineering, and in demanding machine construction applications). Solutions are available to fit control voltages from 12V/24V to 48V. The product can be wired in parallel in order to increase the power capacity. A two-channel set-up with 100% load sharing can also be implemented with an optional redundancy module. This serves to increase your operational reliability. The Remote On/ Off function allow you to switch the device on and off remotely. The output status can be signalled over a voltage-free relay or transistor output. The devices are equipped with pluggable connection terminals which allow them to be easily tested. Product solutions can be custom-fit for use in different types of one-phase, and three-phase systems. General ordering data Delivery status Available until Type Order No. Version GTIN (EAN) Qty. Alternative product Discontinued 2019-06-30 CP T SNT 180W 24V 7,5A 1105810000 Power supply, switch-mode power supply unit, 24 V 4032248881383 1 pc(s). 2466990000 Creation date November 10, 2020 2:46:26 PM CET Catalogue status 06.11.2020 / We reserve the right to make technical changes. 1 Data sheet Pro-H CP T SNT 180W 24V 7,5A Weidmuller Interface GmbH & Co. KG Klingenbergstrae 26 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights Width Height Depth Net weight 54 mm 110 mm 110 mm 782 g Width (inches) Height (inches) Depth (inches) 2.126 inch 4.331 inch 4.331 inch Operating temperature, max. Storage temperature, max. Operating temperature 70 C 85 C -25 C...70 C Temperatures Humidity Operating temperature, min. Storage temperature, min. Storage temperature 0...95 % (no condensation) -25 C -25 C -25 C...85 C Environmental Product Compliance REACH SVHC Lead 7439-92-1 E255651 Certificate No. (UL) E258476 1.4 A @ 230 V AC, 2.5 A @ 115 V AC Screw connection 4A 100...240 V AC (autoselect) Screw connection AC input voltage range Frequency range AC Inrush current Recommended back-up fuse 85...132 V AC, 187...264 V AC 47...63 Hz < 20 A (230 V AC) 6...16 A, Char. B, circuit breaker Rated data UL Certificate No. (cURus) Input AC current consumption Connection system Input fuse (internal) Rated input voltage Wire connection method Output Continous output current @ UNominal Output power Output voltage Parallel connection option Residual ripple, breaking spikes 2.5 A @ 40 C, 5 A @ 40 C, 3.8 A @ 70 C 180 W 24...28 V (adjustable via potentiometer on front) yes, max. 5 100 mVPP @ 24 V DC, Inom Nominal output current for Unom Output voltage Output voltage type Rated output voltage Wire connection method 2.5 A @ 40 C 24 V DC 24 V DC 1 % Screw connection General data AC failure bridging time @ Inom Degree of efficiency Humidity MTBF Operating temperature Short-circuit protection min. 20 ms @ 230 V AC, min. 10 ms @ 115 V AC Typ.: 88 % @ 230 V AC 0...95 % (no condensation) > 0.9 mill. h -25 C...70 C Yes Current limiting Housing version Indication Mounting position, installation notice Protection degree > 100 % IN Metal, corrosion resistant Dual LED Operational: green LED, Error: red LED Horizontal on TS35 rail, with 80 mm of clearance at top and bottom for air circulation; can be aligned side-by-side with 50 mm gap in between. IP20 Creation date November 10, 2020 2:46:26 PM CET Catalogue status 06.11.2020 / We reserve the right to make technical changes. 2 Data sheet Pro-H CP T SNT 180W 24V 7,5A Weidmuller Interface GmbH & Co. KG Klingenbergstrae 26 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data EMC / shock / vibration Limiting of mains voltage harmonic currents Vibration resistance IEC 60068-2-6 Shock resistance IEC 60068-2-27 According to EN 61000-3-2 3 axes, sinus, 10...55 Hz, 1 g, 1 oct/min. 3 axes, half sinus, 15 g, 11 ms Noise emission in accordance with EN55032 Interference immunity test acc. to Class B EN 61000-4-2 (ESD)| EN 61000-4-3 and EN 61000-4-8 (fields)|EN 61000-4-4 (burst)|EN 61000-4-5 (surge)|EN 61000-4-6 (conducted)| EN 61000-4-11 (dips) Insulation coordination Insulation voltage Protection class 4 kV (input / output) I, with PE connection Pollution severity 2 For use with electronic equipment Acc. to EN50178 / VDE0160 Conductor cross-section, AWG/kcmil , min. Conductor cross-section, rigid , max. Connection system Tightening torque, max. Wire connection cross section, flexible (input), max. Electrical safety (applied standards) Electrical machine equipment Safety transformers for switch-mode power supplies Acc. to EN60204 According to EN 61558-2-4 Connection data (input) Conductor cross-section, AWG/kcmil , max. Conductor cross-section, flexible , min. Conductor cross-section, rigid , min. Number of terminals Tightening torque, min. 12 0.5 mm 0.5 mm 3 for L/N/PE 0.5 Nm 24 2.5 mm Screw connection 0.6 Nm 2.5 mm Connection data (output) Conductor cross-section, AWG/kcmil , max. Conductor cross-section, flexible , max. Conductor cross-section, rigid , max. Number of terminals Tightening torque, min. 12 2.5 mm 2.5 mm 7 (+ / - / signal) 0.5 Nm Conductor cross-section, AWG/kcmil , min. Conductor cross-section, flexible , min. Conductor cross-section, rigid , min. Tightening torque, max. Wire connection method Wire cross-section, AWG/kcmil , min. Wire cross-section, solid , min. 24 0.5 mm 1 mm 0.6 Nm Connection data (signal) Number of terminals Wire cross-section, AWG/kcmil , max. Wire cross-section, solid , max. 3 12 2.5 mm Pluggable screw connection 32 0.2 mm Signalling Active output signal 22 V DC 2 V DC / max. 20 mA Power Good Signal Trigger point 18...22 V DC Creation date November 10, 2020 2:46:26 PM CET Catalogue status 06.11.2020 / We reserve the right to make technical changes. 3 Data sheet Pro-H CP T SNT 180W 24V 7,5A Weidmuller Interface GmbH & Co. KG Klingenbergstrae 26 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Approvals Institute (CSA) Certificate No. (CSA) Institute (UL) Certificate No. (UL) Institute (cURus) Certificate No. (cURus) 246286-2148800 E258476 E255651 Classifications ETIM 6.0 eClass 9.0 eClass 10.0 EC002540 27-04-07-01 27-04-07-01 ETIM 7.0 eClass 9.1 EC002540 27-04-07-01 Approvals Approvals ROHS Conform Downloads Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data User Documentation DE_PA5200_160421_001.pdf CAT 4.3 ELECTR 15/16 EN EPLAN, WSCAD Warrenty_Information_Power_Supplies.pdf Operating Instructions Creation date November 10, 2020 2:46:26 PM CET Catalogue status 06.11.2020 / We reserve the right to make technical changes. 4