Atmel AT97SC3204 Trusted Platform Module LPC Interface SUMMARY DATASHEET Features Fully compliant to the Trusted Computing Group (TCG) Trusted Platform Module (TPM) version 1.2 specification Compliant with TCG PC client-specific TPM Interface Specification (TIS) version 1.2 Single-chip, turnkey solution Hardware asymmetric crypto engine Atmel(R) AVR(R) RISC microprocessor Internal EEPROM storage for RSA keys 33MHz Low Pin Count (LPC) bus for easy PC interface Secure hardware and firmware design and chip layout Internal, high-quality Random Number Generator (RNG) - FIPS 140-2 compliant NV storage space for 1756 bytes of user defined data 3.3V supply voltage 28-lead thin TSSOP, 28-lead wide TSSOP, or 40-pad QFN packages Offered in both commercial (0 to 70C) and industrial (-40 to +85C) temperature ranges Description The Atmel AT97SC3204 is a fully integrated security module designed to be integrated into personal computers and other embedded systems. It implements version 1.2 of the Trusted Computing Group (TCG) specification for Trusted Platform Modules (TPM). The TPM includes a cryptographic accelerator capable of computing a 2048-bit RSA signature in 200ms and a 1024-bit RSA signature in 40ms. Performance of the SHA-1 accelerator is 20s per 64-byte block. The chip communicates with the PC through the LPC interface. The TPM supports SIRQ (for interrupts) and CLKRUN to permit clock stopping for power savings in mobile computers. This is a summary document. The complete document is available under NDA. For more information, please contact your local Atmel sales office. Atmel-5295ES-TPM-AT97SC3204-LPC-Interface-Datasheet-Summary-032013 Pin Configurations and Pinouts Table 1-1. Pin Configurations Pin name Function VCC 3.3V Supply Voltage SB3V Standby 3.3V Supply Voltage GND Ground LRESET# PCI Reset Input Active Low LAD0 LPC Command, Address, Data Line Input/Output LAD1 LPC Command, Address, Data Line Input/Output LAD2 LPC Command, Address, Data Line Input/Output LAD3 LPC Command, Address, Data Line Input/Output LCLK 33MHz PCI Clock Input LFRAME# LPC FRAME Input CLKRUN# PCI Clock Run Input/Output LPCPD# LPC Power-Down Input SERIRQ Serialized Interrupt Request Input/Output GPIO-Express-00 GPIO assigned to TPM_NV_INDEX_GPIO_00 TestI Test Input (Disabled) TestBI Test Input (Disabled) ATest Atmel Test Pin NC No Connect NBO Not Bounded Out Pinouts 31 NBO 32 NBO 33 NBO 34 NBO 35 NBO 36 NBO 39 ATest 40 ATest 28-pin TSSOP 6.1mm x 9.7mm Body 0.65mm Pitch 37 SERIRQ 40-pin QFN 6.0mm x 6.0mm Body 0.50mm Pitch 28-pin TSSOP 4.4mm x 9.7mm Body 0.65mm Pitch 38 LPCPD# Table 1-2. SB3V 3 28 VCC GND 4 25 GND GPIO-Express-00 4 27 LAD1 SB3V 5 24 VCC NC 5 26 LFRAME# GPIO-Express-00 6 23 LAD1 TestI 6 25 LCLK NC 7 22 LFRAME# TestBI 7 24 LAD2 TestI 8 21 LCLK VCC 8 23 VCC TestBI 9 20 LAD2 GND 9 22 GND VCC 10 GND 11 19 VCC NBO 10 21 LAD3 NBO 12 NBO 13 17 LAD3 NBO 14 15 CLKRUN# 16 LRESET# 30 LAD0 LRESET# 20 18 GND CLKRUN# 19 ATest 26 LAD0 NBO 18 29 GND 3 NBO 17 ATest 2 NBO 16 1 GND NBO 15 ATest 27 SERIRQ NBO 14 28 LPCPD# 2 NBO 13 1 NBO 12 ATest NBO 11 1. Atmel AT97SC3204 LPC Interface [SUMMARY DATASHEET] Atmel-5295ES-TPM-AT97SC3204-LPC-Interface-Datasheet-Summary-032013 2 2. Block Diagram GPIO-Express-00 ROM Program EEPROM Program 33MHz LPC Interface AVR 8-bit RISC CPU SRAM EEPROM Data GPIO RNG CRYPTO Engine Timer Physical Security Circuitry The TPM includes a hardware random number generator, including a FIPS-approved Pseudo Random Number Generator that is used for key generation and TCG protocol functions. The RNG is also available to the system to generate random numbers that may be needed during normal operation. The chip uses a dynamic internal memory management scheme to store multiple RSA keys. Other than the standard TCG commands (TPM_FlushSpecific, TPM_Loadkey2), no system intervention is required to manage this internal key cache. The TPM is offered to OEM and ODM manufacturers as a turnkey solution, including the firmware integrated on the chip. In addition, Atmel provides the necessary device driver software for integration into certain operating systems, along with BIOS drivers. Atmel will also provide manufacturing support software for use by OEMs and ODMs during initialization and verification of the TPM during board assembly. Full documentation for TCG primitives can be found in the TCG TPM Main Specification, Parts 1 to 3, on the TCG Web site located at https://www.trustedcomputinggroup.org. TPM features specific to PC Client platforms are specified in the "TCG PC Client Specific TPM Interface Specification, Version 1.2", also available on the TCG web site. Implementation guidance for 32-bit PC platforms is outlined in the "TCG PC Client Specific Implementation Specification for Conventional BIOS for TCG Version 1.2", also available on the TCG website. Atmel AT97SC3204 LPC Interface [SUMMARY DATASHEET] Atmel-5295ES-TPM-AT97SC3204-LPC-Interface-Datasheet-Summary-032013 3 3. Ordering Information Atmel Ordering Code AT97SC3204 (1) AT97SC3204 (1) Note: 1. Package Operating Range 28X1 (28-pin thin TSSOP) 40ML1 (40-pin QFN) Lead-free, RoHS Commercial (0C to 70C) Industrial (-40C to 85C) Please see the AT97SC3204 datasheet addendum for the complete catalog number ordering code. Package Type 28X1 40ML1 28-lead, 4.4mm body width, Plastic Thin Shrink Small Outline (thin TSSOP) 40-pad 6.0 x 6.0x0.9mm body, 0.50mm pitch, Very-thin Quad Flat No Lead (VQFN) Atmel AT97SC3204 LPC Interface [SUMMARY DATASHEET] Atmel-5295ES-TPM-AT97SC3204-LPC-Interface-Datasheet-Summary-032013 4 4. Package Drawings 4.1 28X1 -- 28-lead Thin TSSOP TOP VIEW DETAIL 'A' END VIEW C (12 REF) D B 1 14 S E E1 R1 H R C L (0~8) L d 0.20 C B A 28 15 e 2X N/2 TIPS A2 A 0.25 SEE DETAIL "A" A (1.00 REF) D C (12 REF) d 0.10 C 28X b A1 j n 0.10 m C B A SEATING PLANE SIDE VIEW COMMON DIMENSIONS (UNIT OF MEASURE=MM) SYMBOL Note: 1. Refer to JEDEC drawing MO-153,variation AE 2. Dimension D does not include mold flash, protrusions or gate burrs. Mold flash,protrusions or gate burrs shall not exceed 0.15mm per end. Dimension E1 does not include interlead flash or protrusion. Interlead flash or protrusion shall not exceed 0.25mm per side. 3. Dimension "b" does not include dambar protrusion. Allowable dambar protrusion shall be 0.08mm total in excess of the "b" dimension at maximum material condition. Minimum space between protrusion and adjacent lead is 0.07mm. MIN NOM MAX NOTE A - - 1.10 A1 0.05 - 0.15 A2 0.85 0.90 0.95 b c 0.19 - 0.30 0.09 - 0.20 D 9.60 9.70 9.80 1 4.50 1 6.40BSC E E1 2 4.30 e 4.40 0.65 BSC L 0.45 0.60 0.75 R 0.09 - - R1 0.09 - - S 0.20 - - 7/8/2011 Package Drawing Contact: packagedrawings@atmel.com TITLE GPC DRAWING NO. REV. 28X1, 28-lead, 4.4mm Body Width, Plastic Thin Shrink Small Outline Package (TSSOP) TFL 28X1 A Atmel AT97SC3204 LPC Interface [SUMMARY DATASHEET] Atmel-5295ES-TPM-AT97SC3204-LPC-Interface-Datasheet-Summary-032013 5 40ML1 -- 40-pad VQFN 0.05 C 0.10 C A 2X 0.10 C A D A A1 2X N 0.10 C B A2 A3 1 Pin 1 Indicator 2 3 E Top View L B 0 C Side View D2 COMMON DIMENSIONS (Unit of Measure = mm) E2 SYMBOL 3 2 b 1 e MIN D 6.00 BSC 6.00 BSC D2 4.10 4.30 4.40 4.10 4.30 4.40 - 0.85 0.90 A1 0.0 0.01 0.05 A2 - 0.65 0.70 L Bottom View NOTE 0.20 REF 0.30 e b Notes: MAX E2 A3 PIN1 ID NOM E A N 4.2 0.40 0.50 0.50 BSC 0.18 0.23 0.30 2 1. This drawing is for general information only. Refer to JEDEC Drawing MO-220, Variation WJJD-2, for proper dimensions, tolerances, datums, etc. 2. Dimension b applies to metallized terminal and is measured between 0.15 mm and 0.30 mm from the terminal tip. If the terminal has the optional radius on the other end of the terminal, the dimension should not be measured in that radius area. 09/23/11 Package Drawing Contact: packagedrawings@atmel.com TITLE 40ML1, 40-pad 6.0 x 6.0x0.9 mm Body, 0.50 mm pitch, Very-Thin Quad Flat No Lead Package (VQFN) Punched GPC DRAWING NO. ZJI 40ML1 Atmel AT97SC3204 LPC Interface [SUMMARY DATASHEET] Atmel-5295ES-TPM-AT97SC3204-LPC-Interface-Datasheet-Summary-032013 REV. D 6 5. Revision History Doc. Rev. Date 5295ES 03/2013 Comments Removed bullet from features: 2048-bit RSA(R) sign in 200ms. Updated footers and disclaimer page. Changed GPIO6 to GPIO-Express-00. 5295DS 12/2012 Updated package drawings 28A3 and 40ML1. Updated package drawing 28A1 to 28X1. Updated template and Atmel logos. 5295CS 03/2011 Corrected header and footers. 5295BS 10/2010 Added Industrial Grade support detail. 5295AS 01/2008 Initial document release. Atmel AT97SC3204 LPC Interface [SUMMARY DATASHEET] Atmel-5295ES-TPM-AT97SC3204-LPC-Interface-Datasheet-Summary-032013 7 Atmel Corporation 1600 Technology Drive, San Jose, CA 95110 USA T: (+1)(408) 441.0311 F: (+1)(408) 436.4200 | www.atmel.com (c) 2013 Atmel Corporation. All rights reserved. / Rev.: Atmel-5295ES-TPM-AT97SC3204-LPC-Interface-Datasheet-Summary-032013 Atmel(R), Atmel logo and combinations thereof, Enabling Unlimited Possibilities(R), AVR(R), and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others. Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND CONDITIONS OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and products descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Atmel: AT97SC3204T-X1K180 AT97SC3204-DX2A12-10 AT97SC3204-DX2A12-20 AT97SC3204T-U2A17-00 AT97SC3204-X2M6-00 AT97SC3204-X2A12-10 AT97SC3204-X2A16-00 AT97SC3204-X2A16-10 AT97SC3204X2A16-20 AT97SC3204T-X2A17-00 AT97SC3204-U2A16-00 AT97SC3204T-U2MB-00 AT97SC3204-X4A13-20 AT97SC3204-X2MA-00 AT97SC3204-X4A14-20 AT97SC3204-X4A13-10 AT97SC3204-U4A13-20 AT97SC3204X4A14-10 AT97SC3204T-X2MB-00 AT97SC3204-U2MA-00 AT97SC3204-U2MA-20 AT97SC3204-U4A13-10 AT97SC3204T-X2A1B-10 AT97SC3204T-U2A1B-10 AT97SC3204-X2A1A-10 AT97SC3204-U2MA-10 AT97SC3204T-X2MB-10 AT97SC3204-X2DB16-00 AT97SC3204-U2A1A-10 AT97SC3204-X2MA-10 AT97SC3204SU2AC-10 AT97SC3204-X2MA-20 AT97SC3204-U2A1A-20 AT97SC3204-U4A14-10 AT97SC3204-U4A14-20 AT97SC3204-X1DB190 AT97SC3204-X2A1A-20 AT97SC3204T-U2MB-10 AT97SC3204S-X2AC-10 AT97SC3204TSDK2