NOTES:
1. LEDs Left/Right: G= green; Y= yellow.
2. Add suffix “T” for Tape & Reel option (e.g. J0C-0004T).
3. RoHS-5 - Product does not contain 5 out of the 6 banned substances specified in the RoHS directive.
Product contains lead in applications considered as solders.
4. RoHS-6 - Product does not contain 5 out of the 6 banned substances specified in the RoHS directive.
Some internal connections may contain lead in high temperature solder (solder alloys containing more
than 85% lead).
Features and Benefits:
RoHS-5 peak reflow temperature rating 235°C
RoHS-6 peak reflow temperature rating 245°C
J0C SMT product, reduced size and low cost alternative
to JV series
Electrical Performance Summary:
Meets IEEE 802.3 specification
High performance for maximum EMI suppression
Minimum 1500Vrms isolation per IEEE 802.3 requirement
Mating Force Unmating Force Plug to Jack
Part Number (MAX) (MAX) Durability Retention (MIN)
J0C/JV/J3 Series 5 lbs./2.268 kgs. 5 lbs./2.268 kgs. 750 Insertions 20 lbs./9.072 kgs
.
RJ45 Durability Testing Rating
Description:
10/100Base-TX surface mount RJ45 single port (1x1) Tab-UP/DOWN with or without LEDs Integrated Magnetics
Connector, designed to support applications such as: Set Top Box and Network Interface Cards (NIC).
JV0
J0C
SMT Contacts
J30
Insertion Return Loss Common Mode Hipot
RoHS-5 3RoHS-6 4
Turns Loss (dB MIN) Crosstalk Rejection (Vrms)
Compliant Compliant Ratios Tab LEDs
1
BST EMI TX/RX 100Ω (±15Ω) (dB MIN) (dB MIN) (MIN)
Part No. Part No.
Option L/R Circuit Finger (dB MAX)
TX RX
Up/Down 1-65 1-10 30 60-80 1-10 30-60 60-100 1-50 50-130 @60 Hz
MHz MHz MHz MHz MHz MHz MHz MHz MHz 1 MIN
J0C-0003 J0C-0003NL 1CT:1 1CT:1 Down No No No -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500
J0C-0004 J0C-0004NL 1CT:1 1CT:1 Down No No Yes -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500
J0C-0005 J0C-0005NL 1CT:1 1CT:1 Down No Yes No -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500
J0C-0006 J0C-0006NL 1CT:1 1CT:1 Down No Yes Yes -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500
JV006I21 JV006I21NL 1CT:1 1CT:1 Down No No Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
JV011I21 JV011I21NL 1CT:1 1CT:1 Down No Yes Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
JV026I21 JV026I21NL 1CTS:1 1CT:1 Down No Yes Yes -1.0 - 20 -16 -12 -40 -35 -30 -30 -20 1500
J3006G21D J3006G21DNL 1CT:1 1CT:1 Up G/Y No Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
J3011G21D J3011G21DNL 1CT:1 1CT:1 Up G/Y Yes Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
J3018G21K
_
1CTS:1.414 1CT:1 Up G/G Yes Yes -1.0 -20 -16 -11.5 -40 -35 -30 -30 -20 1500
J3026G01D J3026G01DNL 1CTS:1 1CT:1 Up G/Y Yes No -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
J3026G21D J3026G21DNL 1CTS:1 1CT:1 Up G/Y Yes Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
Electrical Specifications @ 25°C — Operating Temperature 0°C to +70°C
PULSEJACKTM
Surface Mount 1x1
Notes: 1. Connector dimensions comply with FCC part 68 dimension requirements.
2. MSL = Moisture Sensitivity Level rating: 1 to 5 (highest rating = 1, lowest
rating = 5).
3. The MSL rating for J0C-000X is Level 4. All other connectors are Level 1.
4. NL parts are tin matte finish over nickel.
Part Shield Contact Housing MSL2
Number Material Finish Material Plating Area Solder Area4Material Specification Rating
J0C/JV/J3 20-40µ inches thick nickel Phosphor 15µ inches gold over 75-300µ inches tin-lead over High Temp.
Series Brass over Brass Bronze 30-80µ inches nickel 30-80µ inches nickel Thermoplastic UL 94 V-0 13
RJ45 Material Specification
www.pulseeng.com
1 J409.F (8/06)
USA 858 674 8100
••
Germany 49 7032 7806 0
••
Singapore 65 6287 8998
••
Shanghai 86 21 54643211/2
••
China 86 769 85538070
••
Taiwan 886 3 4641811
PULSEJACKTM
Surface Mount 1x1
J0C Platform Schematics
J0C-0005/6
J0C-0003/4
TD+ 1
CT 4
TD- 2
RD+ 3
CT 5
RD- 6
8
7
4
5
6 RX-
3 RX+
2 TX-
1 TX+
1CT : 1
TRANSMIT
1CT : 1
RECEIVE
CABLE SIDE
PCB SIDE TO PHY
GND* 8
*Connecting pin 8 to Ground makes J00-0042/46/64/66
footprint compatible to J00-0014/45/61/65.
NC 7
0.001mF
1CT : 1
RECEIVE
8
7
4
5
6 RX-
3 RX+
2 TX-
1 TX+
TD+ 1
CT 4
TD- 2
RD+ 3
CT 5
RD- 6
NC 7
8
1CT : 1
TRANSMIT
CABLE SIDE
PCB SIDE TO PHY
GND
NOTE: Connect GND to PCB ground.
75
75
75
75
www.pulseeng.com
2 J409.F (8/06)
USA 858 674 8100
••
Germany 49 7032 7806 0
••
Singapore 65 6287 8998
••
Shanghai 86 21 54643211/2
••
China 86 769 85538070
••
Taiwan 886 3 4641811
PULSEJACKTM
Surface Mount 1x1
JV Platform Schematics
JV006 JV011
JV026
C A B L E
P C B side to P H Y
C A B L E
P C B side to P H Y
C A B L E
P C B side to P H Y
www.pulseeng.com
3 J409.F (8/06)
USA 858 674 8100
••
Germany 49 7032 7806 0
••
Singapore 65 6287 8998
••
Shanghai 86 21 54643211/2
••
China 86 769 85538070
••
Taiwan 886 3 4641811
PULSEJACKTM
Surface Mount 1x1
J3 Platform Schematics
J3006 J3011
J3018/J3026
C A B L E
P C B side to P H Y
C A B L E
P C B side to P H Y
C A B L E
P C B side to P H Y
J3026J3018
www.pulseeng.com
4 J409.F (8/06)
USA 858 674 8100
••
Germany 49 7032 7806 0
••
Singapore 65 6287 8998
••
Shanghai 86 21 54643211/2
••
China 86 769 85538070
••
Taiwan 886 3 4641811
PULSEJACKTM
Surface Mount 1x1
J0C Platform Mechanicals
(J0C-0003/5 - Same platform without EMI Fingers)
J0C-0004/6
EMI Fingers
EMI Fingers
www.pulseeng.com
5 J409.F (8/06)
USA 858 674 8100
••
Germany 49 7032 7806 0
••
Singapore 65 6287 8998
••
Shanghai 86 21 54643211/2
••
China 86 769 85538070
••
Taiwan 886 3 4641811
PULSEJACKTM
Surface Mount 1x1
JV Platform Mechanicals
JV Series
JV0XX121
Date Code
Country of Origin
Dimensions: Inches
mm
Unless otherwise specified,
all tolerances are ± .010
0,25
www.pulseeng.com
6 J409.F (8/06)
USA 858 674 8100
••
Germany 49 7032 7806 0
••
Singapore 65 6287 8998
••
Shanghai 86 21 54643211/2
••
China 86 769 85538070
••
Taiwan 886 3 4641811
PULSEJACKTM
Surface Mount 1x1
J3 Platform Mechanical
J3 Series
J30XXGX1D
Date Code
Country of Origin
J3026G21D
Date Code
Country of Origin
Dimensions: Inches
mm
Unless otherwise specified,
all tolerances are ± .010
0,25
J3026G21D
With EMI
Tabs
www.pulseeng.com
7 J409.F (8/06)
USA 858 674 8100
••
Germany 49 7032 7806 0
••
Singapore 65 6287 8998
••
Shanghai 86 21 54643211/2
••
China 86 769 85538070
••
Taiwan 886 3 4641811
PULSEJACKTM
Surface Mount 1x1
J0C Application Note
This line of 10/100Base-TX SMT RJ45 1X1 Connector Magnetics
Modules has been specifically designed for the implementation of
a 10Base-T and 100Base-TX transmission over data-grade
unshielded twisted pair cable (UTP-3, 5e and 6).
The connectors provide excellent EMI filtering and are suitable for
adapter card and multiport applications. Pulse has worked closely
with the leading IC manufacturers in providing these 10/100
solutions, thereby assuring compatibility with each transceiver.
The JC0 series meets the stringent open circuit inductance
requirements imposed by IEEE. When an 8mA DC current is
applied across the transformer windings, the transformer will
provide at least 350µH. The transformers used in each module
also provide 1500Vrms minimum isolation, wide bandwidth with
minimal attenuation and fast rise times to minimize system
level jitter.
The 1X1 SMT RJ45 connectors manufactured by Pulse are
designed to meet all published specifications after exposure to
surface mount soldering temperatures. The SMT are robust
enough to withstand convection and infrared reflow solder
temperatures. Additionally, compliant leads provide excellent
solder-joint reliability with a coplanarity of 0.10mm (0.004")
NOTE: Modules are packaged in trays, unless Tape & Reel
is specified. Please add the suffix "T" for Tape & Reel orders
(ex: J0C-0003T). Add the suffix “NL” for RoHS compliant parts
(ex: J0C-0003NL for Trays and J0C-0003NLTfor Tape & Reel).
PCB Layout Recommendations:
1. For maximum EMI suppression (electromagnetic interference)
place the decoupling capacitors adjacent to Vcc and 50Ω
connections.
2. Connections to ground should be as short as possible.
3. Connections between the 10/100 IC and the SMT connector
should be direct (ideally no change in direction) and of
minimum length.
www.pulseeng.com
8 J409.F (8/06)
USA 858 674 8100
••
Germany 49 7032 7806 0
••
Singapore 65 6287 8998
••
Shanghai 86 21 54643211/2
••
China 86 769 85538070
••
Taiwan 886 3 4641811
PULSEJACKTM
Surface Mount 1x1
JV Application Note
This line of 10/100Base-TX SMT RJ45 1X1 Connector Magnetics
Modules has been specifically designed for the implementation of
a 10Base-T and 100Base-TX transmission over data-grade
unshielded twisted pair cable (UTP-3, 5e and 6).
The connectors provide excellent EMI filtering and are suitable for
adapter card and multiport applications. Pulse has worked closely
with the leading IC manufacturers in providing these 10/100
solutions, thereby assuring compatibility with each transceiver.
The JV series meets the stringent open circuit inductance
requirements imposed by IEEE. When an 8mA DC current is
applied across the transformer windings, the transformer will
provide at least 350µH. The transformers used in each module
also provide 1500Vrms minimum isolation, wide bandwidth with
minimal attenuation and fast rise times to minimize system
level jitter.
The 1X1 SMT RJ45 connectors manufactured by Pulse are
designed to meet all published specifications after exposure to
surface mount soldering temperatures. The SMT are robust
enough to withstand convection and infrared reflow solder
temperatures. Additionally, compliant leads provide excellent
solder-joint reliability with a coplanarity of 0.10mm (0.004")
NOTE: Modules are packaged in trays, unless Tape & Reel
is specified. Please add the suffix "T" for Tape & Reel orders
(ex: JV006I21T). Add the suffix “NL” for RoHS compliant parts
(ex: JV006I21NL for Trays and JV006I21NLTfor Tape & Reel).
PCB Layout Recommendations:
1. For maximum EMI suppression (electromagnetic interference)
place the decoupling capacitors adjacent to Vcc and 50Ω
connections.
2. Connections to ground should be as short as possible.
3. Connections between the 10/100 IC and the SMT connector
should be direct (ideally no change in direction) and of
minimum length.
www.pulseeng.com
9 J409.F (8/06)
USA 858 674 8100
••
Germany 49 7032 7806 0
••
Singapore 65 6287 8998
••
Shanghai 86 21 54643211/2
••
China 86 769 85538070
••
Taiwan 886 3 4641811
PULSEJACKTM
Surface Mount 1x1
Tape and Reel Specification
Tray Specification
J0C Packaging Specifications
J0C Series
Weight..............7.07 grams
Tape & Reel ............90/reel
Tray ........................80/tray
Tape ...................44x32mm
Tube ......................25/tube
USA 858 674 8100
••
UK 44 1483 401 700
••
France 33 3 84 35 04 04
••
Singapore 65 6287 8998
••
Shanghai
86 21 54643211 / 2
••
China 86 769 85538070
••
Taiwan 886 3 4641811
www.pulseeng.com
10 J409.F (8/06)
Tape and Reel Specification
Tray Specification
JV Packaging Specifications
PULSEJACKTM
Surface Mount 1x1
JV Series
Weight ...............6.6 grams
Tape & Reel ..........150/reel
Tray ........................45/tray
Tape ...................44x32mm
www.pulseeng.com
11 J409.F (8/06)
USA 858 674 8100
••
Germany 49 7032 7806 0
••
Singapore 65 6287 8998
••
Shanghai 86 21 54643211/2
••
China 86 769 85538070
••
Taiwan 886 3 4641811
PULSEJACKTM
Surface Mount 1x1
Tray Specification
Tape and Reel Specification
J3 Packaging Specifications
J3 Series
Weight ...............8.1 grams
Tape & Reel ............75/reel
Tray ........................45/tray
Tape ...................56x32mm
www.pulseeng.com
12 J409.F (8/06)
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product
names mentioned herein may be trademarks or registered trademarks of their respective owners.
© Copyright, 2006. Pulse Engineering, Inc. All rights reserved.
For More Information:
Pulse Worldwide
Headquarters
12220 World Trade Dr.
San Diego, CA 92128
U.S.A.
www.pulseeng.com
TEL: 858 674 8100
FAX: 858 674 8262
Pulse South Asia
150 Kampong Ampat
#07-01/02
KA Centre
Singapore 368324
TEL: 65 6287 8998
FAX: 65 6280 0080
Pulse North Asia
No. 26
Kao Ching Rd.
Yang Mei Chen
Taoyuan Hsien
Taiwan, R. O. C.
TEL: 886 3 4641811
FAX: 886 3 4641911
Pulse China
Headquarters
No. 1
Industrial District
Changan, Dongguan
China
TEL: 86 769 85538070
FAX: 86 769 85538870
Pulse North China
Room 1503
XinYin Building
No. 888 YiShan Rd.
Shanghai 200233
China
TEL: 86 21 54643211/2
FAX: 86 21 54643210
Pulse European
Headquarters
Einsteinstrasse 1
71083 Herrenberg
Germany
TEL: 49 7032 7806 0
FAX: 49 7032 7806 12