Surface Mount
Multi-Functional
DIP Switch
IR Solderable,
Features
Optimized Contact System
• Contact wiping action on make and break
• Integral terminal and contact locked into thermoset base
• Available with low profile, standard, or extended actuators
Optimized Mechanical Features
• Enclosed actuators shield contacts from foreign particles
throughout life of switch
• Gull-wing terminal configurations
Series 204 DDaattaaSShheeeett
SMD DIP Switch
Contact Resistance
50 milliohms maximum initial
100 milliohms maximum at end of life
Operating Temperature
5,000 cycles switching 50 mA @ 24 VDC
Nonswitching Rating
100 mA or 50 VDC maximum
Insulation Resistance
1,000 megohms minimum between insulated terminals
Dielectric Strength
500 VAC for 1 minute between adjacent switches
Switch Capacitance
5 pF maximum between adjacent closed switches
Coplanarity
0.1mm/.004" max.
Allowable Solder Time
Shock
Per MIL-STD-202F, method 213B, condition A
(50 G’s) with no contact inconsistencies
Vibration
Per MIL-STD-202F, method 204D, condition B
(.06" or 15 G’s between 10 Hz to 2K Hz) with
no contact inconsistencies greater than 1 microsecond
• Coplanarity: 0.1mm / .004” max.
• Available with SPST,SPDT,DPST,
Switch Function
SPST - 2 through 10 and 12 positions
SPDT & DPST - 1 through 6 positions
Sealing
Bottom epoxy seal optional
Marking
Special side or top marking available - consult CTS
• Electrostatic discharge shield rated to 22 KV
• Compatible with SMT assembly including IR and
Vapor-Phase (up to 260°C)
Up to 60 seconds at 260°C
Standard : Anti-static tube packaging
Optional : Tape and reel packaging
greater than 1
microsecond
Actuation Life
–55°C to +85°C Packaging
1 - 4
CTS Electrocomponents www.ctscorp.com
©2017 CTS Corporation. All rights reserved. Information subject to change.
PCB Washable
®
Electrocomponents
Electrical and Mechanical Specifications
3PST circuitry choices
3PST - 1 through 4 positions
• Gold plated contacts for long-term contact corrosion
resistance
• All UL 94 V-0 plastics used
• RoHS compliant
• Optional top tape seal for board spray washing
Optional top tape seal for board spray washing