TZM-Series www.vishay.com Vishay Semiconductors Small Signal Zener Diodes FEATURES * Very sharp reverse characteristic * Low reverse current level * Very high stability * Low noise * TZMC - VZ-tolerance 5 % * TZMB - VZ-tolerance 2 % * AEC-Q101 qualified * Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT VZ range nom. 2.4 to 75 V Test current IZT 2.5; 5 mA VZ specification Pulse current Int. construction Single APPLICATIONS * Voltage stabilization ORDERING INFORMATION DEVICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY TZM-series TZM-series-GS18 10 000 (8 mm tape on 13" reel) 10 000/box TZM-series TZM-series-GS08 2500 (8 mm tape on 7" reel) 12 500/box PACKAGE PACKAGE NAME WEIGHT MiniMELF SOD-80 31 mg MOLDING COMPOUND MOISTURE SENSITIVITY FLAMMABILITY RATING LEVEL UL 94 V-0 MSL level 1 (according J-STD-020) SOLDERING CONDITIONS 260 C/10 s at terminals ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER Power dissipation TEST CONDITION SYMBOL VALUE UNIT RthJA 300 K/W Ptot 500 mW IZ Ptot/VZ mA RthJA 500 K/W Zener current Junction to ambient air On PC board 50 mm x 50 mm x 1.6 mm Junction temperature Storage temperature range Forward voltage (max.) Rev. 1.6, 28-Sep-11 IF = 200 mA Tj 175 C Tstg - 65 to + 175 C VF 1.5 V Document Number: 84122 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TZM-Series www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) ZENER VOLTAGE RANGE PART NUMBER VZ at IZT1 TEST CURRENT IZT1 V MIN. TZMC2V4 2.28 IZT2 mA REVERSE LEAKAGE CURRENT IR at VR A V IR (1) at VR A 2.56 5 1 < 50 1 < 100 TEMPERATURE COEFFICIENT OF ZENER VOLTAGE ZZ at IZT1 ZZK at IZT2 TKVZ V NOM. MAX. 2.4 DYNAMIC RESISTANCE 1 %/K TYP. TYP. MIN. MAX. < 85 < 600 - 0.09 - 0.06 TZMC2V7 2.5 2.7 2.9 5 1 < 10 1 < 50 1 < 85 < 600 - 0.09 - 0.06 TZMC3V0 2.8 3.0 3.2 5 1 <4 1 < 40 1 < 90 < 600 - 0.08 - 0.05 TZMC3V3 3.1 3.3 3.5 5 1 <2 1 < 40 1 < 90 < 600 - 0.08 - 0.05 TZMC3V6 3.4 3.6 3.8 5 1 <2 1 < 40 1 < 90 < 600 - 0.08 - 0.05 TZMC3V9 3.7 3.9 4.1 5 1 <2 1 < 40 1 < 90 < 600 - 0.08 - 0.05 TZMC4V3 4 4.3 4.6 5 1 <1 1 < 20 1 < 90 < 600 - 0.06 - 0.03 TZMC4V7 4.4 4.7 5 5 1 < 0.5 1 < 10 1 < 80 < 600 - 0.05 0.02 TZMC5V1 4.8 5.1 5.4 5 1 < 0.1 1 <2 1 < 60 < 550 - 0.02 0.02 TZMC5V6 5.2 5.6 6 5 1 < 0.1 1 <2 1 < 40 < 450 - 0.05 0.05 TZMC6V2 5.8 6.2 6.6 5 1 < 0.1 2 <2 2 < 10 < 200 0.03 0.06 TZMC6V8 6.4 6.8 7.2 5 1 < 0.1 3 <2 3 <8 < 150 0.03 0.07 TZMC7V5 7 7.5 7.9 5 1 < 0.1 5 <2 5 <7 < 50 0.03 0.07 TZMC8V2 7.7 8.2 8.7 5 1 < 0.1 6.2 <2 6.2 <7 < 50 0.03 0.08 TZMC9V1 8.5 9.1 9.6 5 1 < 0.1 6.8 <2 6.8 < 10 < 50 0.03 0.09 TZMC10 9.4 10 10.6 5 1 < 0.1 7.5 <2 7.5 < 15 < 70 0.03 0.1 TZMC11 10.4 11 11.6 5 1 < 0.1 8.2 <2 8.2 < 20 < 70 0.03 0.11 TZMC12 11.4 12 12.7 5 1 < 0.1 9.1 <2 9.1 < 20 < 90 0.03 0.11 TZMC13 12.4 13 14.1 5 1 < 0.1 10 <2 10 < 26 < 110 0.03 0.11 TZMC15 13.8 15 15.6 5 1 < 0.1 11 <2 11 < 30 < 110 0.03 0.11 TZMC16 15.3 16 17.1 5 1 < 0.1 12 <2 12 < 40 < 170 0.03 0.11 TZMC18 16.8 18 19.1 5 1 < 0.1 13 <2 13 < 50 < 170 0.03 0.11 TZMC20 18.8 20 21.2 5 1 < 0.1 15 <2 15 < 55 < 220 0.03 0.11 TZMC22 20.8 22 23.3 5 1 < 0.1 16 <2 16 < 55 < 220 0.04 0.12 TZMC24 22.8 24 25.6 5 1 < 0.1 18 <2 18 < 80 < 220 0.04 0,12 TZMC27 25.1 27 28.9 5 1 < 0.1 20 <2 20 < 80 < 220 0.04 0.12 TZMC30 28 30 32 5 1 < 0.1 22 <2 22 < 80 < 220 0.04 0.12 TZMC33 31 33 35 5 1 < 0.1 24 <2 24 < 80 < 220 0.04 0.12 TZMC36 34 36 38 5 1 < 0.1 27 <2 27 < 80 < 220 0.04 0.12 TZMC39 37 39 41 2.5 0.5 < 0.1 30 <5 30 < 90 < 500 0.04 0.12 TZMC43 40 43 46 2.5 0.5 < 0.1 33 <5 33 < 90 < 600 0.04 0.12 TZMC47 44 47 50 2.5 0.5 < 0.1 36 <5 36 < 110 < 700 0.04 0.12 TZMC51 48 51 54 2.5 0.5 < 0.1 39 < 10 39 < 125 < 700 0.04 0.12 TZMC56 52 56 60 2.5 0.5 < 0.1 43 < 10 43 < 135 < 1000 0.04 0.12 TZMC62 58 62 66 2.5 0.5 < 0.1 47 < 10 47 < 150 < 1000 0.04 0.12 TZMC68 64 68 72 2.5 0.5 < 0.1 51 < 10 51 < 200 < 1000 0.04 0.12 TZMC75 70 75 79 2.5 0.5 < 0.1 56 < 10 56 < 250 < 1500 0.04 0.12 Notes * Additional measurement of voltage group TZMC9V1 to TZMC75, IR at 95 % VZmin. 35 nA at Tj = 25 C (1) at T = 150 C j Rev. 1.6, 28-Sep-11 Document Number: 84122 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TZM-Series www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) ZENER VOLTAGE RANGE PART NUMBER VZ at IZT1 TEST CURRENT IZT1 V MIN. TZMB2V4 2.35 IZT2 mA REVERSE LEAKAGE CURRENT IR at VR A V IR (1) at VR A 2.45 5 1 < 50 1 < 100 TEMPERATURE COEFFICIENT OF ZENER VOLTAGE ZZ at IZT1 ZZK at IZT2 TKVZ V NOM. MAX. 2.4 DYNAMIC RESISTANCE 1 %/K TYP. TYP. MIN. MAX. < 85 < 600 - 0.09 - 0.06 TZMB2V7 2.64 2.7 2.76 5 1 < 10 1 < 50 1 < 85 < 600 - 0.09 - 0.06 TZMB3V0 2.94 3.0 3.06 5 1 <4 1 < 40 1 < 90 < 600 - 0.08 - 0.05 TZMB3V3 3.24 3.3 3.36 5 1 <2 1 < 40 1 < 90 < 600 - 0.08 - 0.05 TZMB3V6 3.52 3.6 3.68 5 1 <2 1 < 40 1 < 90 < 600 - 0.08 - 0.05 TZMB3V9 3.82 3.9 3.98 5 1 <2 1 < 40 1 < 90 < 600 - 0.08 - 0.05 TZMB4V3 4.22 4.3 4.38 5 1 <1 1 < 20 1 < 90 < 600 - 0.06 - 0.03 TZMB4V7 4.6 4.7 4.8 5 1 < 0.5 1 < 10 1 < 80 < 600 - 0.05 0.02 TZMB5V1 5 5.1 5.2 5 1 < 0.1 1 <2 1 < 60 < 550 - 0.02 0.02 TZMB5V6 5.48 5.6 5.72 5 1 < 0.1 1 <2 1 < 40 < 450 - 0.05 0.05 TZMB6V2 6.08 6.2 6.32 5 1 < 0.1 2 <2 2 < 10 < 200 0.03 0.06 TZMB6V8 6.66 6.8 6.94 5 1 < 0.1 3 <2 3 <8 < 150 0.03 0.07 TZMB7V5 7.35 7.5 7.65 5 1 < 0.1 5 <2 5 <7 < 50 0.03 0.07 TZMB8V2 8.04 8.2 8.36 5 1 < 0.1 6.2 <2 6.2 <7 < 50 0.03 0.08 TZMB9V1 8.92 9.1 9.28 5 1 < 0.1 6.8 <2 6.8 < 10 < 50 0.03 0.09 TZMB10 9.8 10 10.2 5 1 < 0.1 7.5 <2 7.5 < 15 < 70 0.03 0.1 TZMB11 10.78 11 11.22 5 1 < 0.1 8.2 <2 8.2 < 20 < 70 0.03 0.11 TZMB12 11.76 12 12.24 5 1 < 0.1 9.1 <2 9.1 < 20 < 90 0.03 0.11 TZMB13 12.74 13 13.26 5 1 < 0.1 10 <2 10 < 26 < 110 0.03 0.11 TZMB15 14.7 15 15.3 5 1 < 0.1 11 <2 11 < 30 < 110 0.03 0.11 TZMB16 15.7 16 16.3 5 1 < 0.1 12 <2 12 < 40 < 170 0.03 0.11 TZMB18 17.64 18 18.36 5 1 < 0.1 13 <2 13 < 50 < 170 0.03 0.11 TZMB20 19.6 20 20.4 5 1 < 0.1 15 <2 15 < 55 < 220 0.03 0.11 TZMB22 21.55 22 22.45 5 1 < 0.1 16 <2 16 < 55 < 220 0.04 0.12 TZMB24 23.5 24 24.5 5 1 < 0.1 18 <2 18 < 80 < 220 0.04 0,12 TZMB27 26.4 27 27.6 5 1 < 0.1 20 <2 20 < 80 < 220 0.04 0.12 TZMB30 29.4 30 30.6 5 1 < 0.1 22 <2 22 < 80 < 220 0.04 0.12 TZMB33 32.4 33 33.6 5 1 < 0.1 24 <2 24 < 80 < 220 0.04 0.12 TZMB36 35.3 36 36.7 5 1 < 0.1 27 <2 27 < 80 < 220 0.04 0.12 TZMB39 38.2 39 39.8 2.5 1 < 0.1 30 <5 30 < 90 < 500 0.04 0.12 TZMB43 42.1 43 43.9 2.5 0.5 < 0.1 33 <5 33 < 90 < 600 0.04 0.12 TZMB47 46.1 47 47.9 2.5 0.5 < 0.1 36 <5 36 < 110 < 700 0.04 0.12 TZMB51 50 51 52 2.5 0.5 < 0.1 39 < 10 39 < 125 < 700 0.04 0.12 TZMB56 54.9 56 57.1 2.5 0.5 < 0.1 43 < 10 43 < 135 < 1000 0.04 0.12 TZMB62 60.8 62 63.2 2.5 0.5 < 0.1 47 < 10 47 < 150 < 1000 0.04 0.12 TZMB68 66.6 68 69.4 2.5 0.5 < 0.1 51 < 10 51 < 200 < 1000 0.04 0.12 TZMB75 73.5 75 76.5 2.5 0.5 < 0.1 56 < 10 56 < 250 < 1500 0.04 0.12 Notes * Additional measurement of voltage group TZMB9V1 to TZMB75, IR at 95 % VZmin. 35 nA at Tj = 25 C (1) at T = 150 C j Rev. 1.6, 28-Sep-11 Document Number: 84122 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TZM-Series www.vishay.com Vishay Semiconductors BASIC CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 15 TKVZ - Temperature Coefficient of VZ (10-4/K) Ptot - Total Power Dissipation (mW) 600 500 400 300 200 100 0 95 9602 Fig. 1 - Total Power Dissipation vs. Ambient Temperature IZ = 5 mA 0 0 10 20 30 40 50 VZ - Z-Voltage (V) 95 9600 Fig. 4 - Temperature Coefficient of VZ vs. Z-Voltage 1000 200 CD - Diode Capacitance (pF) VZ - Voltage Change (mV) 5 -5 80 120 160 200 40 Tamb - Ambient Temperature (C) 0 Tj = 25 C 100 IZ = 5 mA 10 150 VR = 2 V Tj = 25 C 100 50 0 1 0 5 10 15 25 20 VZ - Z-Voltage (V) 95 9598 0 5 10 15 20 25 VZ - Z-Voltage (V) 95 9601 Fig. 2 - Typical Change of Working Voltage under Operating Conditions at Tamb = 25 C Fig. 5 - Diode Capacitance vs. Z-Voltage 1.3 100 VZtn = VZt/VZ (25 C) 1.2 TKVZ = 10 x 10-4/K 8 x 10-4/K 6 x 10-4/K 1.1 -4 4 x 10 /K 2 x 10-4/K 0 1.0 - 2 x 10-4/K - 4 x 10-4/K 0.9 IF - Forward Current (mA) VZtn - Relative Voltage Change 10 10 Tj = 25 C 1 0.1 0.01 0.001 0.8 - 60 95 9599 0 60 120 180 Tj - Junction Temperature (C) Fig. 3 - Typical Change of Working Voltage vs. Junction Temperature Rev. 1.6, 28-Sep-11 0 240 95 9605 0.2 0.4 0.6 0.8 1.0 VF - Forward Voltage (V) Fig. 6 - Forward Current vs. Forward Voltage Document Number: 84122 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TZM-Series www.vishay.com Vishay Semiconductors 1000 rZ - Differential Z-Resistance () 100 IZ - Z-Current (mA) 80 Ptot = 500 mW Tamb = 25 C 60 40 20 IZ = 1 mA 100 5 mA 10 10 mA Tj = 25 C 1 0 0 4 6 12 8 20 0 VZ - Z-Voltage (V) 95 9604 Fig. 7 - Z-Current vs. Z-Voltage 5 10 15 20 25 VZ - Z-Voltage (V) 95 9606 Fig. 9 - Differential Z-Resistance vs. Z-Voltage 50 Ptot = 500 mW Tamb = 25 C IZ - Z-Current (mA) 40 30 20 10 0 15 20 25 30 35 VZ - Z-Voltage (V) 95 9607 Zthp - Thermal Resistance for Pulse Cond. (KW) Fig. 8 - Z-Current vs. Z-Voltage 1000 tp/T = 0.5 100 tp/T = 0.2 Single Pulse RthJA = 300 K/W T = Tjmax - Tamb 10 tp/T = 0.01 tp/T = 0.1 tp/T = 0.02 tp/T = 0.05 1 10-1 iZM = (- VZ + (VZ2 + 4rzj x T/Zthp) 1/2)/(2rzj) 100 101 tp - Pulse Length (ms) 102 95 9603 Fig. 10 - Thermal Response Rev. 1.6, 28-Sep-11 Document Number: 84122 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TZM-Series www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches): MiniMELF SOD-80 1.6 (0.063) 1.4 (0.055) Cathode indification * 0.47 (0.019) max. 3.7 (0.146) 3.3 (0.130) * The gap between plug and glass can be either on cathode or anode side Foot print recommendation: 1.25 (0.49) min. 2 (0.079) min. 2.5 (0.098) max. 5 (0.197) ref. Document no.:6.560-5005.01-4 Rev. 8 - Date: 07.June.2006 96 12070 Rev. 1.6, 28-Sep-11 Document Number: 84122 6 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000