Vertical Cavity Surface Emitting Laser in ST Optical Sub-Assembly OPV315AT, OPV315BT, OPV315YAT, OPV315YBT Features: * 850 nm VCSEL technology * High thermal stability * Up to 2.5 Gbps * Recommended for multimode fiber applications * Microbead lens * Pin out and attenuation options available on request * Burned in for communication level reliability * High optical coupling to MM fiber * ST* style receptacle Description: The OPV315AT and OPV315BT are high performance 850nm VCSEL packaged for high speed communication links. OPV315AT and OPV315BT combines all the performance advantages of a VCSEL with the addition of a power monitor diode for precise control of optical power. The OPV315YAT and OPV315YBT are identical electrically and optically and differ only in pin out. Refer to mechanical drawings for details. This product's combination of features including high speed, high output power and concentric beam makes it an ideal transmitter for integration into all types of data communications equipment. Applications: * * * * * * Fibre Channel Gigabit Ethernet ATM VSR (Very Short Reach) Intra-system links Optical backplane interconnects Absolute Maximum Ratings (TA = 25 C unless otherwise noted) Storage Temperature -40 C to +125 C Operating Temperature 0 C to +85 C Soldering Lead Temperature 260 C for 10 Seconds Maximum Forward Peak Current, Continuous 12 mA Maximum Reverse Voltage 5V Maximum Forward Current, pulsed (1s P.W., 10% D.C.) 48mA * - ST is a registered trademark of AT&T Additional laser safety information can be found on the Optek website. See application #221. Classification is not marked on the device due to space limitations. See package outline for centerline of optical radiance. Operating devices beyond maximum rating may cause devices to exceed rated classification RoHS OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue 3 05/2011 Page 1 of 3 Vertical Cavity Surface Emitting Laser in ST Optical Sub-Assembly OPV315AT, OPV315BT, OPV315YAT, OPV315YBT Electrical/Optical Characteristics (at 25 C unless otherwise specified) SYMBOL PT50 PARAMETER MIN TYP MAX UNITS TEST CONDITION Total Coupled Power OPV315AT, OPV315YAT 300 W IF = 7 mA 50/125 m Fiber OPV315BT, OPV315YBT 200 W IF = 7 mA Note1 ITH Threshold Current 0.8 3.0 mA VF Forward Voltage 1.6 2.2 V IF = 7 mA IR Reverse Current 100 nA VR = 5 V RS Series Resistance 55 ohms Note 2 Slope Efficiency IRPD 20 OPV315AT, OPV315YAT 30 W/mA Note 3 OPV315BT, OPV315YBT 20 W/mA Note 3 Reverse Current, photodiode Linearity 35 0.00 IM Monitor Current 30 Wavelength 840 nA VR = 40 V Note 4 Optical Bandwidth 860 nm 0.85 nm IF = 7 mA, VR = 5 V tr Rise Time 90 ps 20% to 80% tf Fall Time 120 ps 80% to 20% Relative Intensity Noise -123 db/Hz / Temp Coefficient of Slope Efficiency -0.5 %/C 0 - 70 C lTH Temp Variance of Threshold Current 1.0 mA 0 - 70 C /T Temp Coefficient of Wavelength 0.06 nm/C 0 - 70 C Vf/T Temperature Coefficient for VF -2.5 mV/C NRI NOTES: (1) Threshold Current is based on the two line intersection method specified in Telcordia GR-468-Core. Line 1 from 4 mA to 6 mA. Line 2 from 0 mA to 0.5 mA. (2) Series Resistance is the slope of the Voltage-Current line from 5 to 8 mA. (3) Slope efficiency, is the slope of the best fit LI line from 5 mA to 8 mA using no larger than .25 mA test interval points. Measured with a 50/125 m fiber. (4) Linearity--Using data points taken for slope efficiency above, data L/delta I shall be calculated for each adjacent pair of points. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue 3 05/2011 Page 2 of 3 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Vertical Cavity Surface Emitting Laser in ST Optical Sub-Assembly OPV315AT, OPV315BT, OPV315YAT, OPV315YBT Normalized Output Power (7mA, 25 C) Normalized Output Power vs. Forward Current Forward Current (mA) Invisible Light emits from this surface 0.573 [14.55] 1 0.075 [1.91] 2 0.100 D ia. N om . 0.375 [9.53] 0.500 [12.70] 3 0.375-24 UN F-2A 0.410 [10.41] 2x 2-56 UNC-2B O.101 x .15 Deep VCSEL 1 0.400 [10.15] M in. 0.290 [7.37] M ax. PD 2 VCSEL 3 1 PD 2 3 OPV315AT, OPV315BT OPV315YAT, OPV315YBT Pin Connection Pin Connection 1 VCSEL Anode 1 VCSEL Cathode 2 VCSEL Cathode/PD Anode 2 VCSEL Anode/PD Cathode 3 PD Cathode 3 PD Anode OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue 3 05/2011 Page 3 of 3