ABB |Technical Datasheet 1SBC101411D0201 1
3D CAD outline drawings available on «Control Product 3D» portal
15 kW
20 hp
Technical Datasheet 25/03/11
AF30-30-00-.. / AF30Z-30-00-.. 3-pole Contactors
AC / DC Operated - with Screw Terminals
Ordering Details
IEC UL/CSA Control voltage Main
contacts
Auxiliary
contacts
fitted
Type Order code EAN Weight
Rated
power
3-phase
motor
rating
Uc min. ... Uc max.
400 V Pack(ing)
AC-3 480 V 1 piece
kW hp V 50/60 Hz V DC kg
3-pole Contactors
15 20 24...60 20...60 3 0 0 0
AF30-30-00-11 1SBL 277 001 R1100
3471523111219 0.310
48...130 48...130 3 0 0 0
AF30-30-00-12 1SBL 277 001 R1200
3471523111226 0.310
100...250 100...250 3 0 0 0
AF30-30-00-13 1SBL 277 001 R1300
3471523111233 0.310
250...500 250...500 3 0 0 0
AF30-30-00-14 1SBL 277 001 R1400
3471523111240 0.350
Note: AF30-30-00-11 not suitable for a direct control by PLC-output. AF30-30-00-11 available in some countries: please consult your ABB representative.
3-pole Contactors - Low Consumption
15 20 - 12...20 3 0 0 0
AF30Z-30-00-20 1SBL 276 001 R2000
3471523114401 0.350
24...60 20...60 3 0 0 0
AF30Z-30-00-21 1SBL 276 001 R2100
3471523114418 0.350
48...130 48...130 3 0 0 0
AF30Z-30-00-22 1SBL 276 001 R2200
3471523114425 0.350
100...250 100...250 3 0 0 0
AF30Z-30-00-23 1SBL 276 001 R2300
3471523114432 0.350
Note: Only AF..Z contactors with DC control voltage 12...20 V DC need to respect the connection polarities indicated close to the coil terminals: A1+ for the positive pole and A2- for the negative pole
AF30(Z) contactors are used for controlling power circuits
up to 690 V AC and 220 V DC.
They are mainly used for controlling 3-phase motors,
non-inductive or slightly inductive loads.
AF..(Z) contactors include an electronic coil interface providing reduced –
pull-in and holding consumption, particularly for AC control circuits
Only four coils are needed to cover control voltages between 24...500 V –
50/60 Hz or 20...500 V DC.
AF..(Z) offer extended operating limits and are suitable worldwide for
different control voltages. e.g.: the coil 100...250 V 50/60 Hz - DC is
suitable for Europe (230 V 50 Hz) and for North America (120 V 60 Hz
and 208 V 60 Hz).
AF..(Z) contactors can manage large control voltage variations
AF..Z contactors equipped with a 24...60 V 50/60 Hz - 20...60 V DC coil –
allow direct control by 24 V DC 500 mA PLC-output
AF..Z contactors withstand short voltage dips and voltage sags (SEMI –
F47-0706 compliance)
AF..(Z) contactors have built-in surge protection and do not require –
additional surge suppressors.
1SBC101411D0201
Certifications and Approvals