1NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
NACH 100 M 35V 5x6.3 TR 15 Y F
RoHS Compliant
97% Sn (min.), 3% Bi (max.)
380mm (15”) Preferred, 330mm (13") Optional
Tape & Reel
Size in mm
Working Voltage
Tolerance Code M=20%
Capacitance Code in mF, rst 2 digits are signicant
Third digit is no. of zeros, “R” indicates decimal for
values under 10µF
Series
PART NUMBER SYSTEM
Optional: Suitable for automotive equipment, sourced to special
production and inspection at IATF-16949 certied production site
SPECIFICATIONS ARE SUBJECT TO CHANGE
FEATURES
• CYLINDRICAL V-CHIP CONSTRUCTION
• WIDE TEMPERATURE -40° ~+105°C
• LONG LIFE (+105°C, 2000 HOURS)
• 6.3 mm MAXIMUM HEIGHT
• DESIGNED FOR REFLOW SOLDERING
• MEETS THE REQUIREMENTS OF AEC-Q200*
*Contact NIC for supporting test data
Surface Mount Aluminum Electrolytic Capacitors NACH Series
CHARACTERISTICS
Rated Voltage Range 4 ~ 50Vdc
Rated Capacitance Range 1.0 ~ 220µF
Operating Temp. Range -40°C ~ +105°C
Capacitance Tolerance ±20% (M)
Max. Leakage Current
After 2 Minutes @ 20°C
0.01CV or 3µA
whichever is greater
Working Voltage/Surge Voltage
Max. Tan δ @120Hz/20°C
W.V. (Vdc) 46.3 10 16 25 35 50
S.V. (Vdc) 5 8.0 13 20 32 44 63
Dissipation Factor 0.50 0.30 0.22 0.16 0.14** 0.12 0.12
Low Temperature Stability
Impedance Ratio @ 120Hz
Z-40°C/Z+20°C 743 2 2 2 2
Z-55/Z+20°C 12 8 6 443 3
Load Life Test @105°C
2,000 Hours
Capacitance Change Within ±25% of initial measured value
Tan δLess than 200% of specied value
Leakage Current Less than specied value
Cap (µF) Code Working Voltage (Vdc)
4.0 6.3 10 16 25 35 50
1.0 1R0 - - - - - - 4x6.3
2.2 2R2 - - - - - - 4x6.3
3.3 3R3 - - - - - - 4x6.3
4.7 4R7 - - - - 4x6.3 - 5x6.3
10 100 - - - 4x6.3 - 5x6.3 6.3x6.3
22 220 - 4x6.3 - 5x6.3 -6.3x6.3 -
33 330 - 4x6.3 5x6.3 -6.3x6.3 - -
47 470 4x6.3 5x6.3 -6.3x6.3 - - -
100 101 5x6.3 6.3x6.3 - -- - - -
220 221 6.3x6.3 ------
STANDARD VALUES AND CASE SIZES (mm)
*See Part Number System for Details
RoHS
Compliant
includes all homogeneous materials
PRECAUTIONS
Please review the notes on correct use, safety and precautions found at
https://www.niccomp.com/resource/les/aluminum/AlumApplInfoCautions.pdf
If in doubt or uncertainty, please review your specic application - process details with
NIC’s technical support personnel: tpmg@niccomp.com
2NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
Case Size a b c
4 φ1.0 2.6 1.8
5 φ1.4 3.0 1.8
6.3 φ1.8 3.6 1.8
a
c
b
RECOMMENDED LAND PATTERN DIMENSIONS (mm)
SPECIFICATIONS ARE SUBJECT TO CHANGE
Surface Mount Aluminum Electrolytic Capacitors NACH Series
DIMENSIONS (mm)
0.3mm max.
Dφ
L
+ -
II
W
P
A
B
Case Size Dφ ±0.5 L max. A ±0.2 B ±0.2 I ±0.2 W P ±0.2
4 x 6.3 4.0 6.3 4.3 4.3 1.8 0.5 ~ 0.8 1.0
5 x 6.3 5.0 6.3 5.3 5.3 2.2 0.5 ~ 0.8 1.5
6.3 x 6.3 6.3 6.3 6.6 6.6 2.5 0.5 ~ 0.8 2.2
NIC Part Number Cap.
(µF)
W.V.
(Vdc)
Dissipaton Factor
(Tan δ)
Max. Ripple Current (mA)
+105°C/120Hz
Maximum ESR (Ω)
+20OC/120Hz
Load Life Hours
@ +105°C
NACH470M4V4x6.3TR_ _F 47
4.0
0.50 34 17.7 2,000
NACH101M4V5x6.3TR_ _F 100 0.50 61 8.31 2,000
NACH221M4V6.3x6.3TR_ _F 220 0.50 82 3.77 2,000
NACH220M6.3V4x6.3TR_ _F 22
6.3
0.30 26 22.6 2,000
NACH330M6.3V4x6.3TR_ _F 33 0.30 29 15.1 2,000
NACH470M6.3V5x6.3TR_ _F 47 0.30 46 10.6 2,000
NACH101M6.3V6.3x6.3TR_ _F 100 0.30 71 4.98 2,000
NACH330M10V5x6.3TR_ _F 33 10 0.22 43 11.1 2,000
NACH100M16V4x6.3TR_ _F 10
16
0.16 28 26.6 2,000
NACH220M16V5x6.3TR_ _F 22 0.16 39 12.1 2,000
NACH470M16V6.3X6.3TR_ _F 47 0.16 70 5.66 2,000
NACH4R7M25V4x6.3TR_ _F 4.7 25 0.14 22 49.5 2,000
NACH330M25V6.3x6.3TR_ _F 33 0.14 65 7.05 2,000
NACH100M35V5x6.3TR_ _F 10 35 0.12 28 19.9 2,000
NACH220M35V6.3x6.3TR_ _F 22 0.12 55 9.05 2,000
NACH1R0M50V4x6.3TR_ _F 1.0
50
0.12 10 199 2,000
NACH2R2M50V4x6.3TR_ _F 2.2 0.12 16 90.6 2,000
NACH3R3M50V4x6.3TR_ _F 3.3 0.12 16 60.4 2,000
NACH4R7M50V5x6.3TR_ _F 4.7 0.12 23 42.4 2,000
NACH100M50V6.3x6.3TR_ _F 10 0.12 35 19.9 2,000
RIPPLE CURRENT FREQUENCY CORRECTION FACTOR
Frequency Hz 50< f <100 100< f <1K 1K< f <10K 10K< f <100K
Correction
Factor 0.8 1.0 1.3 1.5
Review & Compare Reow Soldering Heat Limits
V-chip SMT Aluminum Electrolytic Capacitors
www.niccomp.com/RSL
STANDARD VALUES, CASE SIZES AND SPECIFICATIONS
For Automotive Equipment see part number system
Part Number Su󰀩x Where _ _: Preferred (15" reel) = TR15, Legacy (13" reel) = TR13 (check with NIC for availability)
3NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
TAPING SPECIFICATIONS (mm)
1. Both Leader and Trailer tape: Minimum 40mm (1.57") empty carrier tape pockets.
2. Leader tape: Approximately 20cm of cover tape at leader.
3. Connection: Maximum 3 connections (slices) per reel.
Case Size A ± 0.5 B ± 0.5 C ± 0.3 D ± 0.1 P ± 0.1 T ± 0.2 t ± 0.2
4 x 6.3 4.7 4.7 12.0 5.5 8.0 6.4 0.6
5 x 6.3 5.7 5.7 12.0 5.5 12.0 6.4 0.6
6.x x 6.3 7.0 7.0 16.0 7.5 12.0 6.5 0.6
T
APFeeding
+
-
1.5∅ +0.1/- 1.75 ±
D
B
C
1.5φ+0.1/-0 1.75 + 0.15
t
4 + 0.1
EMBOSSED CARRIER DIMENSIONS (mm)
Surface Mount Aluminum Electrolytic Capacitors NACH Series
AB
W1
W2
E
D
C
V-Chip 15" (380mm) Reels (TR15 su󰀩x)
Case Size Tape Width A B C D E
4x6.3, 5x6.3 12.0 φ380
±2 φ80~105 φ13
±0.5
φ21
±1.0
2.0
±0.5
6.3x6.3 16.0
Color
Black or Blue
Dimensions (mm)
Case Size Tape Width W1 W2
4x6.3, 5x6.3 12.0 12.5 ~ 14.0 15.5 ~ 20.0
6.3x6.3 16.0 16.5 ~ 18.0 19.5 ~ 24.0
Case Size Reel Quantity
330mm
Reel Quantity
380mm
4x6.3 1,200 1,000
5x6.3 800 1,000
6.3x6.3 800 1,000
SPECIFICATIONS ARE SUBJECT TO CHANGE
4NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
Surface Mount Aluminum Electrolytic Capacitors NACH Series
Case Size Tape Width A B C D E
4x6.3, 5x6.3 12.0 φ330
±2.0 φ50~105 φ13
±0.5
φ21
±1.0
2.0
±0.5
6.3x6.3 16.0
Color
Black or Blue
Dimensions (mm)
Case Size Tape Width W1 W2
4x6.3, 5x6.3 12.0 12.4 ~ 14.4 15.5 ~ 20.0
6.3x6.3 16.0 16.4 ~ 18.4 19.5 ~ 24.0
Optional V-Chip 13" (330mm) Reels (TR13 su󰀩x)
AB
W1
W2
E
D
C
SPECIFICATIONS ARE SUBJECT TO CHANGE