CERAMIC MICROWAVE FILTERS SAW FILTERS SAF Series FEATURES Standard part frequency range (80MHz - 2.0GHz) Low passband ripple Linear phase High selectivity APPLICATIONS Cellular Phone: E-AMPS, PCS and GSM, PDC Cordless Phone: CT-1, ISM, DECT Land Mobile Radio (LMR) 915 MHz ISM Pager RKE GPS PART NUMBERING SYSTEM SAF Designates Saw Filters C 860.5M C - Surface Mount Multi-Layered Ceramic U - Surface Mount Single Layer Ceramic A* Center Frequency in MHz 7* Alpha Character for Design Characteristics 0* Numeric Package Style Code N - TC Numeric Performance Code Substrate: T - Lithium Tantalate N - Lithium Niobate X - Crystal S - Sapphire 180mm dia reels: TC = 500/Reel TC11 = 1,000/Reel TC12 = 2,000/Reel 330mm dia reels: TC00 = 10,000/Reel TC05 = 5,000/Reel TC04 = 4,000/Reel TC02 = 2,000/Reel *Consult Microwave Group for details by part number. TYPICAL CELLULAR SYSTEM AND SAW POSSIBILITIES MIXER SAW IF FILTER IF ANT Attenuation SAW Rx FILTER LNA ATTENUATION VS. FREQUENCY - GENERAL COMPARISON OF FILTER CHARACTERISTICS SAW LC SAW LOCAL FILTER VCO LPF TCXO DUPLEXER P.S. PLL 90MHz PLL P.A. SAW Tx FILTER 350 Dielectric MIXER AF Frequency CG01-I CERAMIC MICROWAVE FILTERS SAW FILTERS SPECIFICATIONS SAF Series Function Center Freq. (MHz) I.L. (dB) max.* SAFC836.5MC90T RF (TX) 836.5 3.8 SAFC881.5MC90T RF (RX) 881.5 3.5 SAFC881.5MD90T RF (RX) 881.5 2.5 RF (RX) differential 881.5 3.5 SAFC83.160MA40X 1st IF 83.160 5.0 SAFC83.160MC40X 1st IF 83.160 5.0 SAFC85.380ME35X 1st IF 85.38 5.5 SAFC130.4MSC10T 1st IF 130.38 5.5 SAFC1960ML1C0T RF (RX) 1960 4.5 SAFC1880ML1C0T RF (TX) 1880 4.5 1867.5 2.8 App. Part Number E-AMPS SAFC881.5MWC90T /ADC PCS SAFC1867.5T1897.5ML80T RF split TX 2.8 IF differential 210.38 8.5 SAFC902.5MA90N RF (TX) 902.5 4 SAFC902.5MC90T RF (TX) 902.5 3.5 RF (TX) differential 902.5 3.5 SAFC947.5MC90T RF (TX) 947.5 3.5 SAFC947.5MD90T RF (TX) 947.5 3.5 SAFC947.5MWC90T RF (TX) differential 947.5 3.8 SAFC942.5MD1C0T RF (RX) 942.5 3.0 SAFC942.5MYJ1C0T RF (RX) 942.5 4.3 SAFC1842.5ML1C0T RF (RX) 1842.5 4.5 RF (RX) EGSM 942.5 3.7 RF (RX) GSM1800 1842.5 4.2 1st IF 246 5 SAFC210.38MWJSOX SAFC902.5MWC90T GSM EGSM GSM 1800 SAFC942.5T1842.5ML80T SAFC246.000MC30X 824 to 849 869 to 894 920 to 2000 869 to 894 824 to 849 1100 to 2000 869 to 894 824 to 849 1100 to 2000 869 to 894 824 to 849 1100 to 2000 fo 15kHZ 83.04 to 83.10 83.22 to 83.28 fo 15kHZ 83.04 to 83.10 83.22 to 83.28 fo 13kHz 85.26 to 85.32 85.44 to 85.50 fo 630kHz 135.33 139.65 to 140.91 1930 to 1990 1850 to 1910 1719 to 1780 1850 to 1910 1930 to 1990 3860 to 3980 1850 to 1885 1930 to 1965 3700 to 3770 1885 to 1910 1965 to 1990 3770 to 3820 209.75 to 211.01 130 to 209.13 211.63 to 270 Attenuation (dB) 3.8 25 32 3.5 30 32 2.5 20 2.3 3.5 30 28 3.0 20 min. 20 min. 3.0 20 min. 20 min. 3 25 25 3 40 45 4.5 15 23 4.5 9 14 2.8 30 20 2.8 30 20 5.0 33 33 890 to 915 4 935 to 960 890 to 915 935 to 960 1500 to 2000 890 to 915 935 to 960 1500 to 2000 935 to 960 890 to 915 1500 to 2000 935 to 960 890 to 915 1500 to 2000 935 to 960 890 to 915 1200 to 1500 925 to 960 880 to 905 1850 to 2500 925 to 960 980 to 1100 1600 to 2500 1805 to 1880 1600 to 1710 1980 to 3000 925 to 960 880 to 905 1600 to 2000 1805 to 1880 1705 to 1785 2800 to 4000 fo 80kHz 245.6 and 246.4 243 and 249 20 3.5 25 40 3.5 25 25 3.5 35 40 3 20 23 3.8 35 35 3.0 18 30 4.3 23 25 4.5 35 20 3.7 15 25 4.2 7 15 3 25 40 Ripple (dB) VSWR max. Max. GDT (s) Input/Output Impedance Pkg. Style Tape Code TC00, TC05, TC11,TC12 TC00, SC33 TC05, TC11,TC12 TC00, SC33 TC05, TC11,TC12 TC00, SC33 TC05, TC11,TC12 1.8 2 N/S 50 ohm // 0pF SC33 1.5 2.0 -- 50 ohm // 0pF 1.5 2.5 -- 50 ohm // 0pF 1.5 2.0 -- 50 ohm // 0pF 1.5 N/S 10.0 850 ohm // -2.0pF SC511 TC, TC11 1.5 N/S 8.0 850 ohm // -2.0pF SC511 TC, TC11 1.5 N/S 10 870 ohm // -1.7pF SC59 N/S N/S 0.8 435 ohm // 0.8uH 3.0 2.5 -- 50 ohm // 0pF 3.0 2.5 -- 50 ohm // 0pF 1.8 1.8 -- 50 ohm // 0pF -- 1.0 -- in 775 ohm // 68nH SC513 out 465 ohm // 54nH 1.7 2.5 N/S 50 ohm // 0pF SC33 1.5 2.1 N/S 50 ohm // 0pF SC33 1.5 2.3 -- 50 ohm // 0pF SC33 1.5 2.3 N/S 50 ohm // 0pF SC33 1.5 2.2 -- 50 ohm // 0pF SC33 1.5 2.3 -- 50 ohm // 0pF SC33 1.7 2.8 -- 50 ohm // 0pF 2.2 2.8 -- 50 ohm // 0pF 3.0 2.5 -- 50 ohm // 0pF 2.5 2.7 -- 50 ohm // 0pF 2.5 2.7 -- 50 ohm // 0pF 1.0 N/S 2.5 420 ohm // -3.6pF SC59 SC33 low profile SC33 low profile TC, TC11, TC04 TC, TC11, TC04 TC00, TC05, TC12 TC00, TC05, TC12 SC44 dual type TC, TC04 TC11 SC57 SC33 low profile SC33 low profile SC33 low profile SC44 dual type SC44 dual type TC02, TC11 TC00, TC05 TC11, TC12 TC00, TC05, TC11, TC12 TC00, TC05, TC11, TC12 TC00, TC05, TC11, TC12 TC00, TC05, TC11, TC12 TC00, TC05, TC11, TC12 TC00, TC05, TC12 TC00, TC05, TC12 TC00, TC05, TC12 TC, TC04, TC11 TC, TC04, TC11 TC, TC04, TC11 N/S: Not Specified. Tape codes and package quantities defined at the end of the SAW section of this catalog. *IL for IF filters is guaranteed at center frequency relative to 0dB reference. I.L. for RF filters is guaranted across the pass band relative to 0dB reference level. **Attenuation for IF filters is relative to center frequency loss. Attenuation for RF filters is relative to 0dB reference level. CG01-I 351 CERAMIC MICROWAVE FILTERS 1897.5 Bandwidth (MHz) CERAMIC MICROWAVE FILTERS SAW FILTERS SPECIFICATIONS SAF Series Type ISM 915 DECT Function Center Freq. (MHz) I.L. (dB) max.* SAFC903MF90T TX or RX 903 4.5 SAFC927MF90T TX or RX 927 4.5 SAFC915MA70N RF 915.0 4.5 SAFU110.6MSA40T 1st IF 110.592 4.5 SAFC815.5MA70N RF 815.5 4.0 SAFC860.5MA70N RF 860.5 4.0 SAFC315MF70T RF (RX) 315 3.0 SAFC869MF70T RF (RX) 869 4.5 SAFC864MF70T RF (RX) 864 4.5 SAFC434MC70T RF (RX) 433.9 4.5 SAFC1575MB1C0S RF (RX) 1575.5 2.8 SAFC90MA31N IF 90 6.5 SAFC950MB90N RF (TX) 800 950 4 SAFC950MC90T RF (TX) 950 3.5 SAFC820ME90N RF (RX) 800 820 2.5 SAFC820MD90T RF (RX) 820 2.2 SAFS1441MC1B0T RF (TX) 1441 2.7 SAFC1489MC90S RF (RX) 1489 2 SAFC1489MC1B0T RX 1489 2.7 RF (TX) 895.5 895.5 4.0 RF(TX) 942.5 942.5 3.5 RF (TX) 826.5 826.5 2.7 RF (TX) 877.5 877.5 2.7 IF 130.0 5.5 Part Number LMR RKE GPS PDC 800 PDC 1.5 SAFC895.5T942.5MF1D0T PDC Multiband SAFC826.5T877.5MF1D0T PDC All SAFC130.000MA1G0X Bandwidth (MHz) Attenuation (dB) 902 to 904 926 to 928 944 to 948 926 to 928 902 to 904 968 to 972 902 to 928 790 to 860 970 to 1040 fo 576MHz fo 1.15MHz fo 1.728MHz 806 to 825 761 to 780 851 to 870 851 to 870 806 to 825 896 to 915 314.7 to 315.3 293 to 293.9 357.5 to 358.7 868 to 870 825 to 828 910 to 913 863 to 865 820 to 823 905 to 908 433.05 to 434.7 389 to 392 475.5 to 478.5 1574 to 1577 1382 to 1397 1478 to 1487 90 1MHz 84 to 85 95 to 96 940 to 960 810 to 830 1050 to 2000 940 to 960 810 to 830 1050 to 2000 810 to 830 940 to 960 1100 to 2000 810 to 830 940 to 960 1100 to 2000 1429 to 1453 1477 to 1501 1783 to 1808 1477 to 1501 1429 to 1453 1737 to 1761 1477 to 1501 1429 to 1453 1735 to 1766 893 to 898 810 to 830 1778 to 1796 925 to 960 870 to 885 1850 to 1920 810 to 843 893 to 960 1300 to 2000 870 to 885 925 to 960 1300 to 2000 130 16kHz 130 100kHz 130 200kHz 4.5 35 40 4.5 35 40 4.5 max. 30 min. 20 min. 3.0 10 min. 30 min. 4.0 max. 20 min. 20 min. 4.0 max. 20 min. 15 min. 3.0 50 50 4.5 40 40 4.5 40 40 4.5 50 50 2.8 35 25 3.0 25 25 4 45 35 3.5 48 35 2.5 32 22 2.2 30 22 2.7 15 32 2 15 35 2.7 15 35 4.0 22 20 3.5 18 10 2.7 24 12 2.7 26 23 3.0 22 40 Ripple (dB) VSWR max. Max. GDT (s) Input/Output Impedance Pkg. Style TC00, TC05, TC11, TC12 TC00, SC33 TC05, TC11, TC12 TC00, SC44 TC04, TC11 1.5 -- -- 50 ohm // 0pF 1.5 -- -- 50 ohm // 0pF 2.0 N/S N/S 50 ohm // 0pF N/S N/S 0.7 300 ohm 1.2H SU511 2.0 2.5 N/S 50 ohm // 0pF SC44 2.0 2.5 N/S 50 ohm // 0pF SC44 1.5 2.0 -- 50 ohm // 0pF SC44 1.5 -- -- 50 ohm // 0pF SC44 1.5 -- -- 50 ohm // 0pF SC44 1.5 2.0 -- 50 ohm // 0pF SC44 1.3 3.0 N/S 50 ohm // 0pF SC33 low profile 2.0 -- 0.5 365 ohm // -0.7pF SC59 2 N/S 2.5 50 ohm // 0pF SC33 1.5 2.5 -- 50 ohm // 0pF SC33 1.5 N/S 2.5 50 ohm // 0pF SC33 1.3 2.5 -- 50 ohm // 0pF SC33 1.5 2.3 -- 50 ohm // 0pF SC22 1.2 N/S 2.7 50 ohm // 0pF SC33 1.5 2.3 -- 50 ohm // 0pF SS22 2.1 2.5 -- 50 ohm // 0pF 2.3 3.2 -- 50 ohm // 0pF 1.6 2.6 -- 50 ohm // 0pF Tape Code SC33 TC, TC11 TC, TC04, TC11 TC, TC04, TC11 TC, TC04, TC11 TC, TC04, TC11 TC, TC04, TC11 TC, TC04, TC11 TC00, TC05, TC12 TC, TC04, TC11 TC00, TC05, TC11, TC12 TC00, TC05, TC11, TC12 TC00 TC05 TC11. TC12 TC00, TC05, TC11, TC12 TC00, TC05, TC12 TC00, TC05, TC11, TC12 TC00, TC05, TC12 SC33 dual type TC00, TC05, TC12 SC33 dual type TC00, TC05, TC12 TC05, TC11 1.3 2.6 -- 50 ohm // 0pF 0.5 -- 5 740 ohm // -1.1pF SC36 N/S: Not Specified. Tape codes and package quantities defined at the end of the SAW section of this catalog. *IL for IF filters is guaranteed at center frequency relative to 0dB reference. I.L. for RF filters is guaranted across the pass band relative to 0dB reference level. **Attenuation for IF filters is relative to center frequency loss. Attenuation for RF filters is relative to 0dB reference level. 352 CG01-I CERAMIC MICROWAVE FILTERS SAW FILTERS SPECIFICATIONS SAF Series Center Freq. (MHz) I.L. (dB) max.* SAFC906ML90T RF (TX) 906 4.5 SAFC851ML90T RF (RX) 851 4.5 SAFC1765MF90T RF (TX) 1765 3.5 SAFC1855MF90T RF (RX) 1885 3.5 SAFC886ME70T RF 886.0 3.5 SAFC931ME70T RF 931.0 3.5 SAFC914ME70T RF 914.0 3.5 SAFC959ME70T RF 959.0 3.5 SAFC139MC70N RF (RX) 1575.5 2.8 SAFC146MC70N IF 90 6.5 SAFC154MC70N RF (TX) 800 950 4 SAFC162MC70N RF (TX) 950 3.5 SAFC171MC70N RF (RX) 800 820 2.5 SAFC280ME70N RF 280.0 4.5 SAFC281ME70N RF 281.0 4.5 SAFC284ME75N RF 284.0 4.5 SAFC930.5ME70T RF 930.5 4.5 Part Number JAPAN CDMA KOREA PCS CT-1 PAGER Bandwidth (MHz) Attenuation (dB) 887 to 925 832 to 870 2661 to 2775 832 to 870 887 to 925 1000 to 2000 1750 to 1780 1840 to 1870 3500 to 3560 1840 to 1870 1750 to 1780 2300 to 4000 884 to 888 840 to 846 929 to 933 884 to 891 913 to 915 891 to 894 934 to 937 958 to 960 936 to 939 979 to 982 1574 to 1577 1382 to 1397 1478 to 1487 90 1MHz 84 to 85 95 to 96 940 to 960 810 to 830 1050 to 2000 940 to 960 810 to 830 1050 to 2000 810 to 830 940 to 960 1100 to 2000 275 to 285 180 to 242.5 317.5 to 380 276 to 286 181 to 243.5 318.5 to 381 280 to 288 184 to 246.5 321.5 to 384 928.8 to 932.2 884.8 to 890.2 906.8 to 911.2 4.5 30 20 4.5 22 20 3.5 30 25 3.5 23 20 3.5 max. 40 min. 3.5 max. 40 min. 3.5 max. 30 min. 15 min. 3.5 max. 30 min. 20 min. 2.8 35 25 3.0 25 25 45 45 35 3.5 48 35 2.5 32 22 4.5 max. 48 min. 40 min. 4.5 max. 48 min. 40 min. 4.5 max. 48 min. 40 min. 4.5 max. 45 min. 30 min. Ripple (dB) VSWR max. Max. GDT (s) Input/Output Impedance Pkg. Style Tape Code TC00, TC05, TC11, TC12 TC00, TC05, TC11, TC12 TC00, TC05, TC11, TC12 TC00, TC05, TC11, TC12 TC, TC04, TC11 TC, TC04, TC11 TC, TC04, TC11 TC, TC04, TC11 TC00, TC05, TC12 TC, TC04, TC11 2.8 2.8 -- 50 ohm // 0pF SC33 3.0 2.8 -- 50 ohm // 0pF SC33 2.0 2.4 -- 50 ohm // 0pF SC33 2.0 2.4 -- 50 ohm // 0pF SC33 1.5 N/S N/S 50 ohm // 10nH SC44 1.5 N/S N/S 50 ohm // 10nH SC44 1.5 N/S N/S 50 ohm // 10nH SC44 1.5 N/S N/S 50 ohm // 10nH SC44 1.3 3.0 N/S 50 ohm // 0pF SC33 low profile 2.0 -- 0.5 365 ohm // -0.7pF SC59 2 N/S 2.5 50 ohm // 0pF SC33 TC12 1.5 2.5 -- 50 ohm // 0pF SC33 TC00, TC05, TC11, TC12 1.5 N/S 2.5 50 ohm // 0pF SC33 TC12 2.0 N/S N/S 230 ohm // -.2pF SC44 TC, TC04 TC11 2.0 N/S N/S 230 ohm // -.2pF SC44 TC, TC04 TC11 2.0 N/S N/S 230 ohm // -.2pF SC44 TC, TC04 TC11 2.0 N/S N/S 50 ohm // 10nH SC44 TC, TC04 TC11 N/S: Not Specified. Tape codes and package quantities defined at the end of the SAW section of this catalog. *IL for IF filters is guaranteed at center frequency relative to 0dB reference. I.L. for RF filters is guaranted across the pass band relative to 0dB reference level. **Attenuation for IF filters is relative to center frequency loss. Attenuation for RF filters is relative to 0dB reference level. CG01-I 353 CERAMIC MICROWAVE FILTERS Function Type CERAMIC MICROWAVE FILTERS SAW FILTERS ENVIRONMENTAL SPECIFICATIONS SAF Series MECHANICAL TEST ITEM PACKAGE SMD Terminal Strength TEST CONDITIONS Filter is soldered onto the center of PCB which is laid on two small supporters spaced 90mm apart. The PCB is deflected to 1mm below the horizontal level by the pressing stick for 1 second and repeated 5 times. LEADED A force of 1.0 Kg shall be applied to each terminal in the direction of the axis of terminal for 30 5 seconds. A force of 250 gf is applied to each lead in axial direction. The lead shall be bent 90 degrees to one direction, then in opposite direction and returned to the original position. Solderability BOTH Lead terminals are immersed in methanol with 7 to 10% of rosin flux for about 5 seconds, then immersed in soldering bath at 230 5C for 5 0.5 seconds. Random Drop BOTH Drop 3 times on concrete floor from 1.0 meter, (30cm for some products). BOTH Vibration amplitude of 1.5mm at 10-55Hz in each of three mutually perpendicular directions for 1 hour. Vibration TEST METHOD MIL-STD-202E Method 208C MIL-STD-201E Method 201A ENVIRONMENTAL TEST ITEM PACKAGE TEST CONDITIONS TEST METHOD Salt Spray BOTH Hold in chamber with 5% salt density at 35C +1.1/-1.7C for 48 hours. Measure after exposure to room condition for 1 hour. MIL-STD-202E Method 101D Temperature Cycling BOTH Exposure to 5 cycles of -55C (30 minutes) +25C (15 minutes), 85C (30 minutes) +25C (15 minutes). Test after 2 hours exposure to room conditions. MIL-STD-202E Method 102A Humidity BOTH Hold in chamber with 90 to 95% R.H. at 40 2C for 100 hours. Test after 2 hours exposure to room conditions. MIL-STD-202E Method 103B Operating Humidity BOTH Hold in chamber with 90 to 95% R.H. at 40 2C for 100 hours at 6VDC. Test after 2 hours exposure to room conditions. MIL-STD-202E Thermal Shock BOTH Expose to 5 cycles of -55C (30 minutes) +85C (30 minutes). Test after 2 hours exposure to room conditions. MIL-STD-202E Method 107D Life Test (High) BOTH Hold in chamber at 85 2C for 100 hours. Test after exposure to room conditions for 2 hours. MIL-STD-202E Method 108A Life Test (Low) BOTH Hold in chamber at -30 2C for 100 hours. Test after exposure to room conditions for 2 hours. MIL-STD-202E Method 108A Operating Life Test BOTH Hold in chamber at 85 2C for 100 hours at 6VDC. Test after exposure to room conditions for 2 hours. Sulfuration BOTH Hold in chamber with 1000ppm sulfur density for 24 hours. Test after exposure to room conditions for 2 hours. SMD Filter shall be preheated at 150 20C for 60 seconds, immersed whole electrode in soldering bath at 240 5C for 3 1 seconds, then measured after exposure to room conditions for 2 hours. LEADED Lead terminals are immersed up to 1.5mm from package base in soldering bath at 260 5C for 10 1 seconds, then measured after exposure to room conditions for 2 hours. PACKAGE TEST CONDITIONS Resistance to Soldering Heat MIL-STD-202E Method 210A ELECTRICAL TEST ITEM TEST METHOD Dielectric Withstanding Voltage BOTH Apply 100VDC between I/O terminals and ground terminal, for 1 minute. MIL-STD-202E Insulation Resistance BOTH Apply 100VDC between I/O terminals and ground terminal, for 1 minute. MIL-STD-202E Method 302 Temperature Characteristics 354 SMD Filter shall be measured between -10C to +60C temperature range. LEADED Filter shall be measured between -10C to +50C temperature range. CG01-I