1N3611GP thru 1N3614GP and 1N3957GP
Vishay Semiconductors
for merly General Semiconductor
Document Number 88502 www.vishay.com
11-Feb-02 1
Glass Passivated Junction Rectifiers Rev.Voltage 200 to 1000V
Forward Current 1.0A
Patented*
0.107 (2.7)
0.080 (2.0)
0.034 (0.86)
0.028 (0.71)
DIA.
1.0 (25.4)
MIN.
1.0 (25.4)
MIN.
0.205 (5.2)
0.160 (4.1)
DIA.
NOTE:
Lead diameter is for suffix "E" part numbers
0.026 (0.66)
0.023 (0.58)
Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Parameter Symbol 1N 1N 1N 1N 1N Unit
3611GP 3612GP 3613GP 3614GP 3957GP
* Maximum repetitive peak reverse voltage VRRM 200 400 600 800 1000 V
* Maximum RMS voltage VRMS 140 280 420 560 700 V
* Maximum DC blocking voltage VDC 200 400 600 800 1000 A
* Maximum average forward rectified current
0.375" (9.5mm) lead length at TA = 75°C IF(AV) 1.0 A
* Peak forward surge current 8.3ms single half sine-wave IFSM 30 A
superimposed on rated load (JEDEC Method)
Typical ther mal resistance (Note 1) RθJA 55 °C/W
RθJL 25
Operating junction and storage temperature range TJ, TSTG – 65 to +175 °C
Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Maximum instantaneous forward voltage at 1.0A VF1.0 V
* Maximum DC reverse current TA = 25°C 1.0
at rated DC blocking voltage TA = 150°C IR300 µA
Typical reverse recovery time at IF=0.5A, IR=1.0A, Irr=0.25A trr 2.0 µs
Typical junction capacitance at 4.0V, 1MHz CJ8.0 pF
Notes: (1) Thermal resistance from junction to ambient and from junction to lead at 0.375” (9.5mm) lead length, P.C.B. mounted
*JEDEC registered values
DO-204AL
(DO-41)
Features
• Plastic package has Underwriters Laboratories
Flammability Classification 94V-0
• High temperature metallurgically bonded construction
• Capable of meeting environmental standards of
MIL-S-19500
• Cavity-free glass passivated junction
• 1.0 Ampere operation at TA=75°C with no ther mal
runaway
• Typical IRless than 0.1µA
• High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
Mechanical Data
Case: JEDEC DO-204AL, molded plastic over glass body
Terminals: Plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.012 oz., 0.3 g
®
Dimensions in inches and (millimeters)
*Glass-plastic encapsulation technique is covered by
Patent No. 3,996,602, and brazed-lead assembly by Patent No. 3,930,306
1N3611GP thru 1N3614GP and 1N3957GP
Vishay Semiconductors
for merly General Semiconductor
www.vishay.com Document Number 88502
211-Feb-02
0
0.2
0.4
0.6
0.8
1.0
0 25 50 75 100 125 150 175
Fig. 1 – Max. Forward Current Derating
Average Forward Rectified Current (A)
Ambient Temperature (°C)
0.01
0.1
1
10
0 60 80 10020 40
Fig. 4 – Typical Reverse Characteristics
Instantaneous Reverse Current (µA)
Percentage of Rated Peak Reverse Voltage (%)
5.0
10
15
20
25
30
1 10 100
Fig. 2 – Maximum Non-Repetitive
Peak Forward Surge Current
Peak Forward Surge Current (A)
Number of Cycles at 60HZ
0.6 0.8 1.0 1.2 1.4 1.6
Instantaneous Forward Voltage (V)
Fig. 3 – Typical Instantaneous
Forward Characteristics
0.1
10
100
1
0.01 0.1 1 10 100
Transient Thermal Impedance (°C/W)
t -- Pulse Duration (sec)
Fig. 6 – Typical Transient Thermal
Impedance
60HZ Resistive or
Inductive Load
0.375" (9.5mm)
Lead Length
TJ = TJmax
8.3ms Single Half Sine-Wave
(JEDEC Method)
TJ = 25°C
Pulse Width = 300µs
1% Duty Cycle
0.01
0.1
1
10
20
Instantaneous Forward Current (A)
TJ = 25°C
TJ = 100°C
1
10
20
0.1 1 10 100
Junction Capacitance (pF)
Reverse Voltage (V)
Fig. 5 – Typical Junction Capacitance
TJ = 25°C
f = 1.0MHZ
Vsig = 50mVp-p
Ratings and
Characteristic Curves(TA= 25°C unless otherwise noted)
