SNAP PAC R-Series Controllers Features SNAP-PAC-R1 controller Description The affordable and compact SNAP PAC R-series programmable automation controllers provide powerful, realtime control and communication to meet your industrial control, monitoring, and data acquisition needs. Part of the Opto 22 SNAP PAC SystemTM, the R-series PAC is a rackmounted, industrially hardened unit that can handle multiple tasks involving digital and analog control, serial string handling, communication, and enterprise connectivity. Used with the included PAC Project Basic software suite (or PAC Project Professional, purchased separately), the Ethernetbased SNAP PAC R-series controller runs control programs written in Opto 22's PAC ControlTM software. It can monitor and control a wide range of devices and equipment wired to the I/O on its own rack and to I/O on distributed racks equipped with SNAP PAC EB-series brains. Alternatively, the R-series controller can be used as a slave to a larger, SNAP PAC S-series standalone industrial controller or a SoftPACTM software-based controller for PC-based control. SNAP PAC R-series controllers are well suited to original equipment manufacturers (OEMs), system integrators, and end-users in process control, discrete manufacturing, or hybrid industries and applications. Part Numbers Part Description SNAP-PAC-R1 Analog/digital/serial rack-mounted controller with two Ethernet ports and highspeed digital functions SNAP-PAC-R1-B Analog/digital/serial rack-mounted controller with two Ethernet ports and highspeed digital functions, for B-series racks Analog/digital/serial rack-mounted controller with two Ethernet ports and highSNAP-PAC-R1-FM speed digital functions, Factory Mutual approved SNAP-PAC-R1-W Wired+Wireless analog/digital/serial rackmounted controller with two wired Ethernet ports, one wireless Ethernet interface, and high-speed digital functions SNAP-PAC-R2 Analog/simple digital/serial rack-mounted controller with two Ethernet ports SNAP-PAC-R2-W Wired+Wireless analog/simple digital/ serial rack-mounted controller with two wired Ethernet ports and one wireless Ethernet interface Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2007-2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Analog/simple digital/serial rack-mounted SNAP-PAC-R2-FM controller with two Ethernet ports, Factory Mutual approved Form 1594-150220 Seven models are available: * SNAP-PAC-R1, SNAP-PAC-R1-FM, SNAP-PAC-R1-W, and SNAP-PAC-R1-B each control a mix of SNAP analog, digital (both 4-channel and high-density), and serial modules. Full digital functions include high-speed counting; quadrature counting; and pulse, period, and frequency measurement. The -FM model is Factory Mutual approved. The -W model adds wireless LAN capability (see "Wired+Wireless Communication" on page 2 for more information). The -B model is designed * to mount on SNAP B-series racks so that older I/O units can be easily upgraded to a newer controller. SNAP-PAC-R2, SNAP-PAC-R2-FM, and SNAP-PAC-R2-W also control a mix of SNAP analog, 4-channel and highdensity digital, and serial modules. High-speed digital functions are not included. The -FM model is Factory SNAP PAC R-Series Controllers Rack-mounted industrial controller with I/O processor included. Two independent 10/100 Mbps Ethernet network interfaces Wired+Wireless models add wireless LAN network interface as well One RS-232 port with handshaking, suitable for modem communication using PPP MicroSD card slot for removable data storage Full-featured control and HMI software included with purchase PAGE 1 SNAP PAC R-Series Controllers Mutual approved.The -W model adds wireless LAN capability (see page 2 for more information). Built-in functions and comparisons of the SNAP-PAC-R1 and SNAP-PAC-R2 are shown in the table on page 10. SNAP PAC R-Series Controllers Ethernet Communication All SNAP PAC R-series controllers communicate over standard 10/100 Mbps Ethernet networks and can be attached to an existing network. The controllers can also be used in an independent control network built with standard, off-theshelf Ethernet hardware. SNAP PAC R-series controllers include two 10/100 Mbps Ethernet interfaces for networking to Ethernet hosts and to other I/O units. These independent Ethernet ports have separate IP addresses that can be used with PAC ProjectTM Professional software to set up redundant network links to safeguard the availability and reliability of an I/O system, or to segment a control system's network from the enterprise LAN. Supported protocols over Ethernet include EtherNetTM/ IP, Modbus(R)/TCP, SMTP, SNMP, FTP, and OptoMMP. DATA SHEET Form 1594-150220 Serial Communication SNAP PAC R-series controllers provide an RS-232 serial link to support Point-to-Point Protocol (PPP) modem connections-- for creating TCP/IP networks over serial or PSTN (Public Switched Telephone Network) lines--as well as remote serial device communication. The RS-232 serial interface supports either a modem connection using PPP or general-purpose communication with serial devices, allowing you to send and receive data from a serial device connected directly to the controller. For additional serial interfaces, you can add one or more SNAP serial communication modules on the rack. NOTE: The R-series controller does not include an RS-485 port and cannot be used to control Opto 22 serial I/O processors, such as the SNAP PAC SB-series brains. Use an S-series controller for serial brains. Wired+Wireless Communication SNAP-PAC-R1-W and SNAP-PAC-R2-W controllers add wireless capability to communications. In addition to the two wired network interfaces, these models have a wireless network interface as well, so each PAC has a total of three separate IP addresses--two wired and one wireless. Wired+Wireless PACs can be used wirelessly or on a wired network, or both at once. For flexibility in designing your wireless network, wireless communication includes support for 802.11a, b, and g standards. Wired+Wireless PACs can be used with a variety of wireless switches and other infrastructure hardware. For the best security, the 802.11i WPA2/AES standard is supported, while older WPA and WEP security standards are included for backwards compatibility. PAGE 2 Just like a laptop computer with a wireless connection, all functionality remains the same whether the Wired+Wireless PAC is used wirelessly or as part of a wired network. Supported protocols remain the same. And control programs run the same on both networks without reprogramming. Because wireless functionality is in the PAC itself, no additional parts are required within the control system for wireless use. All SNAP PAC racks and SNAP I/O modules can be used either wired or wirelessly. You can switch from one network to the other without reconfiguring I/O or changing field wiring. I/O Mounting Racks SNAP PAC R-series controllers must be connected to the appropriate rack to avoid damage to the controller. Both the SNAP-PAC-R1 and R2 are designed to work with SNAP PAC mounting racks, which are available with 4, 8, 12, or 16 positions for Opto 22 SNAP I/O modules. Part numbers are SNAP-PAC-RCK4, SNAP-PAC-RCK8, SNAP-PAC-RCK12, and SNAP-PAC-RCK16. Factory Mutual-approved versions of these racks, with part numbers ending in -FM, are also available. Ethernet PAC for Legacy I/O Racks The SNAP-PAC-R1-B is a PAC-R1 for use with older SNAP B-series racks. This PAC provides an upgrade path from legacy brains and rack-mounted controllers such as the B3000, SNAP-B3000-ENET, or SNAPUP1-ADS that use B-series racks. See the SNAP B-series Racks data sheet (form 0784) for more information. The SNAP-PAC-R1-B uses the same firmware and has the same functionality as the SNAP-PAC-R1, except that 4-channel digital modules can be placed only in slots 0-7 due to limitations on the rack. Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2007-2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. SNAP PAC R-Series Controllers SNAP I/O The SNAP PAC R-series controllers support all SNAP I/O modules available on our website. SNAP digital I/O modules contain four input or output points, and SNAP high-density digital modules contain 16 or 32 input or output points. SNAP analog modules contain 2 to 32 points, depending on the module. A SNAP R-series controller simultaneously runs up to 16 PAC Control flowcharts, although the PAC Control strategy can actually contain a much larger number of flowcharts. The total number of flowcharts is limited only by the memory available for strategy storage. SNAP PAC controllers use Opto 22's PAC Project Microsoft(R) Windows(R)-compatible automation software for programming, human-machine-interface (HMI) development, and OPC connectivity. Two versions of PAC Project are available: * PAC Project Basic includes PAC ControlTM for developing control programs, PAC DisplayTM for creating operator interfaces, and PAC ManagerTM configuration software. * PAC Project Professional adds expanded versions of PAC Control and PAC Display plus a SoftPAC softwarebased controller for PC-based control, OptoOPCServerTM software for exchanging data with OPC 2.0-compliant client software applications, and OptoDataLinkTM for exchanging SNAP PAC System data with databases (including Microsoft SQL Server, Microsoft Access, and MySQL), text files, and email systems). PAC Control Basic is a graphical, flowchart-based programming tool for machine control and process applications. Using PAC Control, you create, download, and run strategies on a SNAP PAC controller. In addition to flowchart programming with subroutine capability, PAC Control includes a powerful, built-in scripting language based on C and other procedural languages. PAC Display Basic is an intuitive HMI package for building operator interfaces, or projects, for communicating with a SNAP PAC controller. PAC Display offers a full-featured HMI including alarming, trending, and a built-in library of 3,000 industrial automation graphics. SNAP PAC R-Series Controllers Software PAC Control Professional adds the ability to import legacy OptoControl strategies, support for older misticTM serial I/O units, and support for the dual independent Ethernet ports on a SNAP PAC controller. PAC Display Professional adds the ability to import projects created in OptoDisplay, part of the legacy Opto 22 FactoryFloor(R) software suite, and using redundant Ethernet communication links on SNAP PAC controllers. PAC Display Professional can also connect to Ethernet-based FactoryFloor controllers running OptoControl strategies. SoftPAC is a software-based programmable automation controller (PAC)designed for PC-based control. Programmed just like an Opto 22 hardware PAC, SoftPAC runs your PAC Control strategy independently on an embedded or standalone PC. SoftPAC takes advantage of a PC's speed and file capabilities for applications requiring extended file storage, frequent access to files, math-intensive processes, or a large number of control flowcharts running at the same time. (c) 2007-2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com Form 1594-150220 OptoOPCServer is a fast, efficient OPC 2.0-compliant server for communicating with many Opto 22 products, including SNAP PAC controllers and I/O units, plus legacy Opto 22 Ethernet-based controllers and I/O. Using OptoOPCServer, you can consolidate data from all these Opto 22 systems into the OPC client software of your choice, such as third-party HMI PAGE 3 SNAP PAC R-Series Controllers SNAP PAC R-Series Controllers and data acquisition packages, and custom software applications you create with tools such as Visual C++(R). OptoDataLink is a software application that makes it easy to share data from the SNAP PAC System with commonly used databases, including Microsoft SQL Server, Microsoft Access, and MySQL, as well as text files. The I/O points and strategy variables already created in your PAC Control strategy are automatically available for OptoDataLink to use for data exchange. PAC Manager is a utility application for assigning IP addresses to SNAP PAC controllers and brains, reading or changing basic controller configuration, and configuring and testing I/O. Processor Memory Total RAM Battery-backed RAM Flash 200 MHz 32-bit ColdFire(R) 5475 with integrated floating-point unit (FPU) Wired+Wireless models 32 MB (10 MB available for PAC Control strategy and 4 MB for file storage. Other models 16 MB (5 MB available for PAC Control strategy and 2 MB for file storage) 2 MB (1 MB available for PAC Control strategy) 8 MB (3.25 MB available for PAC Control strategy; 384 KB available for file storage) Removable storage (Models with manufacture dates of November 2008 and newer. Requires firmware R9.4a or higher and loader R6.1a or higher) MicroSD card slot: supports microSD or microSDHC cards to 32 GB. (Note: Models with card slots and firmware R8.4 through R9.3e support microSD cards up to 2 GB only.) Backup battery Rechargeable (recharges whenever the brain has power), 3-year power-off data retention1 Communication (wired) Ethernet Two independent 10/100 Mbps Ethernet network interfaces (RJ-45 connectors) Each interface has a separate IP address. Connects to host and I/O. Frequency 802.11a Frequency 802.11b/g Transmit Power Antenna Connector Roaming DATA SHEET PAC Project Professional is available for purchase on our website. To get it immediately, you can buy and download the software from the Opto 22 website at www.opto22.com; the CD and printed documentation will be shipped to you. You can also separately purchase PAC Control Professional, PAC Display Professional, SoftPAC, OptoOPCServer, and OptoDataLink as needed. Specifications are continued on the following page. Communication (wireless)3 Topologies Security Form 1594-150220 PAC Project Basic is included with SNAP PAC controllers and is a free download from the Opto 22 website. Specifications RS-232 serial PAGE 4 Software Availability One RS-232 serial port2 with hardware handshaking. Connects to host (via modem and PPP) or serial device. Cannot connect to serial I/O. Wireless LAN interface with separate IP address. Infrastructure, Ad-Hoc 802.11i: AES - Compatible with WPA2 Personal, TKIP - Compatible with WPA Personal, WEP. Note: TKIP/AES security is not supported in Ad-Hoc mode. 5.180-5.240 GHz, 5.745-5.825 GHz 2.412-2.472 GHz, 2.484 GHz 15 dBm maximum Reverse polarity SMA (RP-SMA or RSMA) Supported within an SSID (Service Set Identifier) only I/O unit compatibility SNAP PAC I/O units: SNAP PAC R-series and EB-series I/O units Power requirements 5.0-5.2 VDC @ 1.5 A Hold-down screw Torque: 8 in-lb (0.9 N-m) Connector screw Torque: 1.7 in-lb (0.19 N-m) Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2007-2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. SNAP PAC R-Series Controllers Environmental Operating temperature Storage temperature Humidity Software PAC Project Basic Number of charts that can run simultaneously Includes programming, HMI software, and configuration software; included with purchase of controller. PAC Project Basic plus OPC 2.0-compliant OPC server, database connectivity,OptoControl strategy and OptoDisplay project importing, and support for Ethernet link redundancy or network segmenting. 16 Agency certifications (-W models only) U.S., FCC Part 15 Subpart C; Canada, IC RSS-210 (-FM models only) Factory Mutual approved Warranty 30 months from date of manufacture * Multiple protocol support including TCP/IP, FTP, EtherNet/IP, Modbus/TCP, SNMP v2.0c, OptoMMPTM, and SMTP Other features * Built-in I/O processor handles up to 16 digital4, analog, and serial I/O modules on the same rack * Real-time clock * FTP server/client with file system (in RAM and in removable storage) * Scratch Pad area for peer-to-peer communication * Configurable link redundancy or segmented networking for I/O-controller subnetting (when using PAC Project Professional) 1 Models manufactured before July 1, 2007 have a user-replaceable 3-volt CR2032 Lithium battery (typical service life with power off: 5 years). 2 Connecting to a serial device requires configuration in PAC Manager; PAC Control handles communication. 3 Requires a Wired+Wireless model (SNAP-PAC-R1-W or SNAP-PAC-R2-W). SNAP PAC R-Series Controllers PAC Project Professional -20 C to 60 C -40 C to 85 C 0% to 95% relative humidity, non-condensing 4 SNAP-PAC-R1s with serial numbers lower than 600,000, and all SNAP-PAC-R1-Bs, are limited to eight 4-channel digital modules per rack; remaining eight can be analog, serial, and high-density digital modules. (c) 2007-2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 1594-150220 Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com PAGE 5 SNAP PAC R-Series Controllers System Architecture For the network shown in this diagram, either PAC Project Professional or PAC Project Basic can be used. SNAP PAC R-series Controller in Basic Network Configuration SNAP PAC R-Series Controllers Basic Control Network PC running PAC Display Basic Ethernet switch SNAP PAC R-series Field devices location #1 Additional I/O units are controlled by the R-series controller on the network. Field devices location #2 DATA SHEET Form 1594-150220 In this diagram, the SNAP PAC R-series controller uses one network interface to communicate with host computers and control I/O. The controller controls I/O on its own rack and on other Ethernet-based I/O units. PAGE 6 Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2007-2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. SNAP PAC R-Series Controllers System Architecture (continued) The network shown in this diagram requires PAC Control Professional, PAC Display Professional, and OptoDataLink. SNAP PAC R-series Controller Segmenting Ethernet Networks Control Network Ethernet switch Additional I/O units are controlled by the R-series controller on an isolated network. Field devices location #1 Field devices location #2 SNAP PAC R-series controller communicates with host computers through one network interface and controls I/O both directly on the rack and through the other Ethernet interface. Using a Wired+Wireless PAC, one of these networks can be a wireless one (see the next page). Enterprise Network PC running PAC Display Professional SNAP PAC R-Series Controllers SNAP PAC R1-series PC running OptoOPCServer and OptoDataLink Ethernet switch, network #1 This diagram shows two SNAP PAC I/O units connected together over an Ethernet network and controlled by a SNAP PAC R-series controller running a PAC Control strategy. If you use a Wired+Wireless PAC (SNAP-PAC-R1-W or SNAP-PAC-R2-W), one of these networks can be a wireless LAN. See the following page for an example. (c) 2007-2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com Form 1594-150220 The controller is also connected to a larger, separate enterprise Ethernet network to provide data to PCs running Opto 22's PAC Display HMI software, OptoOPCServer, and OptoDataLink. Sitting between the two networks, the SNAP PAC R-series controller segments enterprise traffic from the control network. PAGE 7 SNAP PAC R-Series Controllers System Architecture (continued) The network shown in this diagram requires a Wired+Wireless R-series controller (SNAP-PAC-R1-W or SNAP-PAC-R2-W). SNAP PAC R-series Controller Segmenting Wired and Wireless Networks SNAP PAC R-Series Controllers Control Network Wireless access point SNAP-PAC-R1-W Remote I/O unit controlled by the R1-W on an isolated network Field devices location #1 Field devices location #2 SNAP-PAC-R1-W wired+wireless controller communicates with host computers through a wired network interface, controls I/O directly on its own rack, and controls one or more remote I/O units on an isolated wireless network. Enterprise Network PC running PAC Display PC running PAC Control DATA SHEET Form 1594-150220 Ethernet switch for wired network PAGE 8 This diagram shows a SNAP PAC Wired+Wireless controller running a PAC Control strategy and controlling one or more remote I/O units via a wireless access point. The controller could just as easily talk to the I/O units through a wired network and segment the enterprise PCs on a wireless LAN. The controller is also connected to a separate, wired enterprise network through one of its wired Ethernet network interfaces. In addition, because the Wired+Wireless PAC has two wired interfaces plus the wireless one, it could segment three networks--for example, a wired control network, a wired enterprise network, and a wireless connection with a laptop for maintenance or testing purposes. Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2007-2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. SNAP PAC R-Series Controllers System Architecture (continued) The network shown in this diagram requires PAC Control Professional, PAC Display Professional, and OptoDataLink. SNAP PAC R-series Controller in Redundant Network Configuration Opto 22 Redundant Network PC with two NICs running OptoOPCServer Ethernet switch, network #1 SNAP PAC S-series controller controls all I/O units. Ethernet switch, network #2 SNAP PAC R-series controller SNAP PAC R-Series Controllers PC with two NICs running PAC Display Professional Sensors and actuators, location #1 SNAP PAC R-series controller I/O units are all connected by the controller. Each I/O unit is connected to its own group of sensors and actuators, but all are connected to the same two networks. Using a Wired+Wireless PAC (SNAP-PAC-R1-W or SNAP-PAC-R2-W) makes it possible for one of these networks to be a wireless LAN. Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2007-2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET In this configuration, if one network goes down, devices can still communicate because the SNAP PAC R-series controllers and the SNAP PAC S-series controllers both have two network interfaces, and each PC in this system has two network interface cards. Form 1594-150220 This diagram shows two SNAP PAC R-Series controllers functioning as I/O unit brains connected to two separate Ethernet networks. This configuration addresses the concern that an Ethernet network may fail or need maintenance, leaving the PC running OptoOPCServer and OptoDataLink, the PC running PAC Display, the controller, and the I/O units unable to communicate. Sensors and actuators, location #2 PAGE 9 SNAP PAC R-Series Controllers SNAP PAC R-Series Comparison Chart SNAP-PAC-R2-W SNAP-PAC-R1-B Watchdog timer High-speed counting (up to 20 kHz)1 TPO (time-proportional output)3 Digital totalizing1,3 Pulse generation (N pulses, continuous square wave, Thermocouple linearization (32-bit floating point for linearized values) Minimum/maximum values Offset and gain Scaling High-density digital (HDD) modules (inputs and outputs) Serial communication modules PID logic (maximum 96 PID loops per controller) Works with PAC Project software Runs PAC Control strategies Wired Ethernet network (two independent network interfaces) Security for wired network (IP filtering, port access) SNAP PAC R-Series Controllers Quadrature counting2 Digital I/O 1,3 point features On-pulse and off-pulse measurement Frequency and Period measurement 1,3 on-pulse, and off-pulse)3 Analog I/O TPO (time-proportional output)4 point features Output clamping Filter weight Watchdog timer Analog totalizing DATA SHEET Form 1594-150220 SNAP-PAC-R2-FM SNAP-PAC-R2 Factory Mutual approval Ramping SNAP-PAC-R1-W On/off status SNAP-PAC-R1 Input latching FEATURE 3 3 Wireless LAN interface (802.11a, b, or g) Security for wireless network (WPA2-AES, WPA-TKIP, WEP) OPC driver support PAGE 10 SNAP-PAC-R1-FM The following table compares SNAP PAC R-series controllers with firmware 9.4 or newer. Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2007-2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. SNAP-PAC-R1-FM SNAP-PAC-R1-W SNAP-PAC-R2 SNAP-PAC-R2-FM SNAP-PAC-R2-W SNAP-PAC-R1-B Modbus/TCP (slave) EtherNet/IP for communication with Allen-Bradley RSLogix PLCs OptoMMP memory-mapped protocol SNMP (network management of I/O & variables) PPP (dial-up and radio modems) FTP server and client Email (SMTP client) UDP Streaming of I/O data to host Serial port (RS-232) Scratch Pad area--bits, floats, integers, strings Digital events, alarm events, serial events Event messages Data logging in the controller I/O point data mirroring and memory map copying Realtime clock (RTC) FEATURE Mounting rack SNAP PAC racks B-series 4, 8, 12, or 16 4, 8, 12, 16 16 digital (any type) 16 analog 8 serial 8 4-ch digital, 8 serial, 16 analog or HDD Number of modules per mounting rack Module types and maximum numbers allowed per I/O unit (with largest rack) SNAP PAC R-Series Controllers SNAP-PAC-R1 SNAP PAC R-Series Controllers 1 4-channel digital modules only; not available on high-density digital modules 2 Requires a SNAP quadrature input module (SNAP-IDC5Q) 3 Requires PAC Control Professional 8.2 or newer, or PAC Control Basic 9.0 or newer 4 Requires a SNAP analog TPO module (SNAP-AOD-29) (c) 2007-2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 1594-150220 Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com PAGE 11 SNAP PAC R-Series Controllers Connectors and Indicators SNAP PAC R-Series Controllers The following information applies to all SNAP PAC R-series controllers except Wired+Wireless models. See page 13 for -W models. NOTE: The microSD card slot is included in R-series PACs manufactured in November 2008 and later. PACs manufactured before November 2008 do not have this feature.. Independent 10/100 Mbps Ethernet interfaces (RJ-45 connectors) RS-232 Port (Port 0) Ethernet LEDs MicroSD card slot Controller reset button Status and activity LEDs RS-232 serial communications Description 1 TX 2 RX 3 COM 4 RTS 5 CTS 6 COM 7 DTR 8 DCD RS-232 Serial Cable Wiring* Status and Activity LEDs Indicator Pin Description ACT Ethernet network activity LNK Link established with Ethernet network STAT Startup status, control program operational status, MicroSD card access 232 RS-232 serial activity PPP PPP status PC Controller DB9 RX 2 1 TX TX 3 2 RX SIGNAL GROUND 5 3 COM 6 COM DATA SHEET Form 1594-150220 * Minimum requirements for wiring an RS-232 serial cable to connect to a PC. If you want to connect the controller to a modem, see form #1595, the SNAP PAC R-Series Controllers User's Guide, for all eight pin connections. PAGE 12 Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2007-2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. SNAP PAC R-Series Controllers Connectors and Indicators (continued) The following information applies to Wired+Wireless models (SNAP-PAC-R1-W and SNAP-PAC-R2-W). Wireless LAN antenna Ethernet LEDs MicroSD card slot Controller reset button Status and activity LEDs RS-232 serial communications LEDs* Indicator Description ACT Ethernet network activity LNK Link established with Ethernet network STAT Startup status, control program operational status, MicroSD card access 232 RS-232 serial activity WLAN Wireless LAN status * The WLAN LED replaces the PPP LED on -W models. These models can still communicate using PPP even though they do not have the indicator. RS-232 Port (Port 0) Pin Description 1 TX 2 RX 3 COM 4 RTS 5 CTS 6 COM 7 DTR 8 DCD SNAP PAC R-Series Controllers Independent 10/100 Mbps Ethernet interfaces (RJ-45 connectors) NOTE: The microSD card slot is included in R-series PACs manufactured in November 2008 and later. PACs manufactured before November 2008 do not have this feature. RS-232 Serial Cable Wiring** PC Controller DB9 RX 2 TX 3 SIGNAL 5 GROUND 1 2 3 6 TX RX COM COM * Minimum requirements for wiring an RS-232 serial cable to connect to a PC. If you want to connect the controller to a modem, see form #1595, the SNAP PAC R-Series Controllers User's Guide, for all eight pin connections. (c) 2007-2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 1594-150220 Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com PAGE 13 SNAP PAC R-Series Controllers Dimensions DATA SHEET Form 1594-150220 SNAP PAC R-Series Controllers This diagram applies to all R-series PACs except -W models. See the following page for dimensions on Wired+Wireless R-series PACs. PAGE 14 Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2007-2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. SNAP PAC R-Series Controllers Dimensions This diagram applies to Wired+Wireless R-series PACs (SNAP-PAC-R1-W and SNAP-PAC-R2-W). SNAP PAC R-Series Controllers (c) 2007-2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 1594-150220 Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com PAGE 15 More About Opto 22 Products Opto 22 develops and manufactures reliable, flexible, easy-to-use hardware and software products for industrial automation, energy management, remote monitoring, and data acquisition applications. groov groov puts your system on your mobile device. With zero programming, you can build mobile operator interfaces to monitor and control systems from Allen-Bradley, Siemens, Schneider Electric, Modicon, and many more. Web-based groov puts mobile-ready gadgets at your fingertips. Tag them from your existing tag database, and they automatically scale for use on any device with a modern web browser. See groov.com for more information and your free trial. SNAP PAC System Designed to simplify the typically complex process of selecting and applying an automation system, the SNAP PAC System consists of four integrated components: * SNAP PAC controllers * PAC ProjectTM Software Suite * SNAP PAC brains * SNAP I/OTM SNAP PAC Controllers Programmable automation controllers (PACs) are multifunctional, modular controllers based on open standards. Opto 22 has been manufacturing PACs for over two decades. The standalone SNAP PAC S-series, the rack-mounted SNAP PAC Rseries, and the software-based SoftPACTM all handle a wide range of digital, analog, and serial functions for data collection, remote monitoring, process control, and discrete and hybrid manufacturing. SNAP PACs are based on open Ethernet and Internet Protocol (IP) standards, so you can build or extend a system easily, without the expense and limitations of proprietary networks and protocols. Wired+WirelessTM models are also available. PAC Project Software Suite Opto 22's PAC Project Software Suite provides full-featured, costeffective control programming, HMI (human machine interface) development and runtime, OPC server, and database connectivity software for your SNAP PAC System. Control programming includes both easy-to-learn flowcharts and optional scripting. Commands are in plain English; variables and I/ O point names are fully descriptive. PAC Project Basic offers control and HMI tools and is free for download on our website, www.opto22.com. PAC Project Professional, available for separate purchase, adds one SoftPAC, OptoOPCServer, OptoDataLink, options for controller redundancy or segmented networking, and support for legacy Opto 22 serial misticTM I/O units. SNAP PAC Brains While SNAP PAC controllers provide central control and data distribution, SNAP PAC brains provide distributed intelligence for I/O processing and communications. Brains offer analog, digital, and serial functions, including thermocouple linearization; PID loop control; and optional high-speed digital counting (up to 20 kHz), quadrature counting, TPO, and pulse generation and measurement. SNAP I/O I/O provides the local connection to sensors and equipment. Opto 22 SNAP I/O offers 1 to 32 points of reliable I/O per module, depending on the type of module and your needs. Analog, digital, and serial modules are all mixed on the same mounting rack and controlled by the same processor (SNAP PAC brain or rack-mounted controller). Quality Founded in 1974, Opto 22 has established a worldwide reputation for high-quality products. All are made in the U.S.A. at our manufacturing facility in Temecula, California. Because we test each product twice before it leaves our factory, rather than only testing a sample of each batch, we can guarantee most solid-state relays and optically isolated I/O modules for life. Free Product Support Opto 22's California-based Product Support Group offers free, comprehensive technical support for Opto 22 products. Our staff of support engineers represents decades of training and experience. Support is available in English and Spanish by phone or email, Monday-Friday, 7 a.m. to 5 p.m. PST. Additional support is always available on our website: how-to videos, OptoKnowledgeBase, self-training guide, troubleshooting and user's guides, and OptoForums. In addition, hands-on training is available for free at our Temecula, California headquarters, and you can register online. Purchasing Opto 22 Products Opto 22 products are sold directly and through a worldwide network of distributors, partners, and system integrators. For more information, contact Opto 22 headquarters at 800-3216786 or 951-695-3000, or visit our website at www.opto22.com. www.opto22.com www.opto22.com * Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * Form 1335-131203 SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2014 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.