AT24C512C-MAHMEU-T - ATMEL

1NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

SPECIFICATIONS ARE SUBJECT TO CHANGE

Surface Mount Specialty Polymer Solid Aluminum

Electrolytic Capacitors NSP Series

CHARACTERISTICS (Note 1)

STANDARD PRODUCTS AND SPECIFICATIONS

FEATURES

• NEW “X”, “Y”, "Z", "U" & "V" TYPE HIGH RIPPLE CURRENT/VERY LOW ESR

• REPLACES MULTIPLE TANTALUM CHIPS IN HIGH

CURRENT POWER SUPPLIES AND VOLTAGE REGULATORS

• FITS EIA (7343) “D” AND “E” TANTALUM CHIP LAND PATTERNS

• Pb-FREE AND COMPATIBLE WITH REFLOW SOLDERING

LOW ESR COMPONENT

SOLID POLYMER ELECTROLYTE

For Performance Data

see www.LowESR.com

Rated Working Range 2.0 ~ 6.3VDC

Rated Capacitance Range 82 ~ 560µF

Operating Temperature Range -55 ~ +105°C

Capacitance Tolerance ± 20% (M)

Max. Leakage Current (µA)

After 2 Minutes (+20°C) All Case Sizes See Standard Products and

Specications Tables

Max. Tan δ, 120Hz, +20°C

High Temperature Load Life

2,000 Hours @ 105°C

at Rated Working Voltage

Capacitance Change Within ±20% of initial measured value

Tan δLess than 200% specied max. value

Leakage Current Less than 300% specied max. value

Damp Heat Test

500 Hours @ +60°C at 90 ~ 95% RH

and Rated Working Voltage

Capacitance Change

6.3V Within -20%/+50% of initial measured value

4V Within -20%/+60% of initial measured value

2V, 2.5V Within -20%/+70% of initial measured value

Tan δLess than 200% of specied max. value

Leakage Current Less than specied max. value

NIC Part Number WV Cap. Max. LC Tan δMax. Ripple Current

+45°C & 100KHz (mArms)

Max. ESR

+20°C & 100KHz (Ω)

Height

(Vdc) (µF) (µA)

NSP181M2D6ZATRF

2.0

180 36.0 0.06 6,300 0.009 1.9±0.1

NSP221M2D6ATRF 220 44.0 0.06 5,100 0.015 1.9±0.1

NSP221M2D6ZATRF 220 44.0 0.06 6,300 0.009 1.9±0.1

NSP271M2D6XATRF 270 54.0 0.06 5,600 0.012 1.9±0.1

NSP271M2D6ZATRF 270 54.0 0.06 6,300 0.009 1.9±0.1

NSP271M2D6YATRF 270 54.0 0.06 7,500 0.006 1.9±0.1

NSP271M2D6UATRF 270 54.0 0.06 8,500 0.0045 1.9±0.1

NSP331M2D6ATRF 330 66.0 0.06 5,100 0.015 1.9±0.1

NSP331M2D6XATRF 330 66.0 0.06 5,600 0.012 1.9±0.1

NSP331M2D6ZATRF 330 66.0 0.06 6,300 0.009 1.9±0.1

NSP331M2D6YATRF 330 66.0 0.06 7,500 0.006 1.9±0.1

NSP331M2D6UATRF 330 66.0 0.06 8,500 0.0045 1.9±0.1

NSP331M2D6VATRF 330 66.0 0.06 10,200 0.003 1.9±0.1

NSP391M2D6ATRF 390 78.0 0.06 5,100 0.015 1.9±0.1

NSP391M2D6ZATRF 390 78.0 0.06 6,300 0.009 1.9±0.1

NSP391M2D6YATRF 390 78.0 0.06 7,500 0.006 1.9±0.1

NSP391M2D6UATRF 390 78.0 0.06 8,500 0.0045 1.9±0.1

NSP471M2D6ATRF 470 94.0 0.06 5,100 0.015 1.9±0.1

NSP471M2D6ZATRF 470 94.0 0.06 6,300 0.009 1.9±0.1

NSP471M2D6YATRF 470 94.0 0.06 7,500 0.006 1.9±0.1

NSP471M2D6UATRF 470 94.0 0.06 8,500 0.0045 1.9±0.1

NSP471M2D6VATRF 470 94.0 0.06 10,200 0.003 1.9±0.1

NSP561M2D6ATRF 560 112.0 0.06 5,100 0.015 1.9±0.1

NSP561M2D6UATRF 560 112.0 0.06 8,500 0.0045 1.9±0.1

NSP561M2D6VATRF 560 112.0 0.06 10,200 0.003 1.9±0.1

NSP151M2.5D6ZATRF

2.5

150 37.5 0.06 6,300 0.009 1.9±0.1

NSP181M2.5D6ZATRF 180 45.0 0.06 6,300 0.009 1.9±0.1

NSP221M2.5D6ATRF 220 55.0 0.06 5,100 0.015 1.9±0.1

NSP221M2.5D6ZATRF 220 55.0 0.06 6,300 0.009 1.9±0.1

NSP221M2.5D6YATRF 220 55.0 0.06 7,000 0.007 1.9±0.1

NSP271M2.5D6YATRF 270 67.5 0.06 7,000 0.007 1.9±0.1

NSP331M2.5D6ATRF 330 82.5 0.06 5,100 0.015 1.9±0.1

NSP331M2.5D6ZATRF 330 82.5 0.06 6,300 0.009 1.9±0.1

NSP331M2.5D6YATRF 330 82.5 0.06 7,500 0.006 1.9±0.1

NSP331M2.5D6UATRF 330 82.5 0.06 8,500 0.0045 1.9±0.1

EXTENDED LOAD LIFE

HIGH RIPPLE CURRENT

ULTRA LOW ESR

Note 1: Specications that apply to "Not Recommended" parts begin on page 5.

2NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

SPECIFICATIONS ARE SUBJECT TO CHANGE

NSP Series

NIC Part Number WV Cap. Max. LC Tan δMax. Ripple Current

+45°C & 100KHz (mArms)

Max. ESR

+20°C & 100KHz (Ω)

Height

(Vdc) (µF) (µA)

NSP391M2.5D6ATRF

2.5

390 97.5 0.06 5,100 0.015 1.9±0.1

NSP391M2.5D6ZATRF 390 97.5 0.06 6,300 0.009 1.9±0.1

NSP391M2.5D6YATRF 390 97.5 0.06 7,500 0.006 1.9±0.1

NSP391M2.5D6UATRF 390 97.5 0.06 8,500 0.0045 1.9±0.1

NSP471M2.5D6ATRF 470 117.5 0.06 5,100 0.015 1.9±0.1

NSP471M2.5D6ZATRF 470 117.5 0.06 6,300 0.009 1.9±0.1

NSP471M2.5D6YATRF 470 117.5 0.06 7,500 0.006 1.9±0.1

NSP471M2.5D6UATRF 470 117.5 0.06 8,500 0.0045 1.9±0.1

NSP471M2.5D6VATRF 470 117.5 0.06 10,200 0.003 1.9±0.1

NSP820M4D6ZATRF

4.0

82 32.8 0.06 6,300 0.009 1.9±0.1

NSP101M4D6ZATRF 100 40.0 0.06 6,300 0.009 1.9±0.1

NSP151M4D6ATRF 150 60.0 0.06 5,100 0.015 1.9±0.1

NSP151M4D6ZATRF 150 60.0 0.06 6,300 0.009 1.9±0.1

NSP151M4D6YATRF 150 60.0 0.06 7,000 0.007 1.9±0.1

NSP181M4D6ATRF 180 72.0 0.06 5,100 0.015 1.9±0.1

NSP181M4D6XATRF 180 72.0 0.06 5,600 0.012 1.9±0.1

NSP181M4D6ZATRF 180 72.0 0.06 6,300 0.009 1.9±0.1

NSP221M4D6ATRF 220 88.0 0.06 5,100 0.015 1.9±0.1

NSP221M4D6XATRF 220 88.0 0.06 5,600 0.012 1.9±0.1

NSP221M4D6ZATRF 220 88.0 0.06 6,300 0.009 1.9±0.1

NSP271M4D6ATRF 270 108.0 0.06 5,100 0.015 1.9±0.1

NSP271M4D6ZATRF 270 108.0 0.06 6,300 0.009 1.9±0.1

NSP331M4D6ATRF 330 132.0 0.06 5,100 0.015 1.9±0.1

NSP101M6.3D6ATRF

6.3

100 63.0 0.06 5,100 0.015 1.9±0.1

NSP121M6.3D6ATRF 120 75.6 0.06 5,100 0.015 1.9±0.1

NSP121M6.3D6ZATRF 120 75.6 0.06 7,000 0.007 1.9±0.1

NSP151M6.3D6ATRF 150 94.5 0.06 5,100 0.015 1.9±0.1

NSP151M6.3D6XATRF 150 94.5 0.06 5,600 0.012 1.9±0.1

NSP151M6.3D6ZATRF 150 94.5 0.06 6,300 0.009 1.9±0.1

NSP181M6.3D6ATRF 180 113.4 0.06 5,100 0.015 1.9±0.1

NSP181M6.3D6ZATRF 180 113.4 0.06 6,300 0.009 1.9±0.1

NSP221M6.3D6ATRF 220 138.0 0.06 5,100 0.015 1.9±0.1

Surface Mount Specialty Polymer Solid Aluminum

Electrolytic Capacitors

STANDARD PRODUCTS AND SPECIFICATIONS

PRECAUTIONS

Please review the notes on correct use, safety and precautions found on

pages T10 & T11 of NIC’s Electrolytic Capacitor catalog.

Also found at www.niccomp.com/precautions

If in doubt or uncertainty, please review your specic application - process

details with NIC’s technical support personnel: tpmg@niccomp.com

Case Code < +45°C >+45°C ~ <+85°C >+85°C ~ +105°C

All 1.0 0.7 0.25

RIPPLE CURRENT TEMPERATURE CORRECTION FACTORS

PART NUMBERING SYSTEM

NSP 151 M 6.3 D6 Z A TR 500 F

RoHS Compliant

500 = 500 piece reel

Tape and Reel

Peak Reow Temperature Code

(A = +260°C)

Optional Performance Code

Case Size

Working Voltage

Tolerance Code M=20%, K=10%

Capacitance Code in µF, rst 2 digits are

signicant, third digits no. of zeros

Series

3NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

SPECIFICATIONS ARE SUBJECT TO CHANGE

If Peak Soldering Temperature is Maximum Time Above +230°C is

260°C, 10 seconds max. 40 seconds

255°C, 10 seconds max. 50 seconds

250°C, 10 seconds max. 60 seconds

COMPONENT SURFACE TEMP. (oC)

RECOMMENDED 260°C REFLOW SOLDERING PROFILE

NATURAL COOLING

260oC Max.

10 Seconds Max.

230

Time above

230°C

120 Seconds

150oC ~ 200°C

PREHEAT

Time (Seconds)

250

150

200

100

DURATION ABOVE 230°C (FOR 260°C REFLOW PARTS)

Notes:

1. SAC alloy (+217°C) reow soldering compatible

2. Soldering heat limits apply to the top surface of component

3. If you have concerns about your reow soldering prole review them with NIC

to insure compatible [tpmg@niccomp.com]

4. Two passes through the reow process are allowed (cooling down period

between process).

NSP Series

Surface Mount Specialty Polymer Solid Aluminum

Electrolytic Capacitors

DIMENSIONS (mm)

Case Code L ±0.2 W ±0.2 HW1 ±0.1 S ±0.3

D6 7.3 4.3 see values table 2.4 1.3

VOLTAGE CODES

Voltage Code

2.0Vdc D

2.5Vdc E

4.0Vdc G

6.3Vdc J

RECOMMENDED LAND PATTERNS (mm)

Please note the NSP series will t on standard

“D” and “E” size (7343) tantalum chip capacitor

land patterns

Case Code A B C

D6 2.8 4.0 8.8

PART MARKING

Capacitance (µF)

Anode Polarity Indicator

Voltage Code

Date Code

64721

4NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

SPECIFICATIONS ARE SUBJECT TO CHANGE

Surface Mount Specialty Polymer Solid Aluminum

Electrolytic Capacitors NSP Series

CARRIER TAPE DIMENSIONS (mm)

REEL DIMENSIONS (mm)

R:1.0

Case

Code A±0.2 B±0.2 DφE±0.1 F±0.1 Po±0.1 P1±0.1 t±0.2 W±0.3

D6 7.7 4.6 1.5 +0.1 5.50 1.75 4.0 8.0 2.4 12.0

A±2.0 B min. C±0.5 D±0.8 E±0.5 T±1.0 t W±1.0

330 80 13.0 21.0 2.0 20.0 3.0 14

Case

Code

Reel

Quantity

D6 3,500

5NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

SPECIFICATIONS ARE SUBJECT TO CHANGE

Surface Mount Specialty Polymer Solid Aluminum

Electrolytic Capacitors NSP Series

CHARACTERISTICS

FEATURES

• PERFORMANCE CODES “X”, “Y” & "Z" (HIGH RIPPLE CURRENT/LOW ESR)

• REPLACES MULTIPLE TANTALUM CHIPS IN HIGH

CURRENT POWER SUPPLIES AND VOLTAGE REGULATORS

• FITS EIA (7343) “D” AND “E” TANTALUM CHIP LAND PATTERNS

• Pb-FREE AND COMPATIBLE WITH REFLOW SOLDERING

LOW ESR COMPONENT

SOLID POLYMER ELECTROLYTE

For Performance Data

see www.LowESR.com

EXTENDED LOAD LIFE

HIGH RIPPLE CURRENT

ULTRA LOW ESR

Rated Working Range 2.0 ~ 16VDC

Rated Capacitance Range 2.2 ~ 560µF

Operating Temperature Range -40 ~ +105°C

Capacitance Tolerance ± 20% (M)

Max. Leakage Current (µA)

After 2 Minutes (+20°C) All Case Sizes See Standard Products and

Specications Tables

Max. Tan δ, 120Hz, +20°C

High Temperature Load Life

1,000 Hours @ 105°C

at Rated Working Voltage

Capacitance Change Within ±10% of initial measured value

Tan δLess than specied max. value

Leakage Current Less than specied max. value

Damp Heat Test

500 Hours @ +60°C at 90 ~ 95% RH

and Rated Working Voltage

Capacitance Change

8V ~ 16V Within -20%/+40% of initial measured value

6.3V Within -20%/+50% of initial measured value

4V Within -20%/+60% of initial measured value

2V, 2.5V Within -20%/+70% of initial measured value

Tan δLess than 200% of specied max. value

Leakage Current Less than specied max. value

PART NUMBERING SYSTEM

NSP 151 M 6.3 D4 X A TR F

RoHS Compliant

Tape and Reel

Peak Reow Temperature Code

(A = +260°C, No Code = +240°C)

Optional Performance Code

Case Size

Working Voltage

Tolerance Code M=20%, K=10%

Capacitance Code in µF, rst 2 digits are

signicant, third digits no. of zeros

Series

D2 - D5, D3X, D4X Sizes

Base: Fe (~ 100µm)

Under Plating: Cu (~ 5µm)

Finish Plating: Sn (5 ~ 9µm)

D4Z Sizes

Base: Cu (~ 105µm)

Finish Plating: Sn (5 ~ 9µm)

TERMINATION MATERIAL:

Not Recommended for New Designs

Note: The following parts are supported but not recommended for new designs

6NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

SPECIFICATIONS ARE SUBJECT TO CHANGE

Surface Mount Specialty Polymer Solid Aluminum

Electrolytic Capacitors NSP Series

NIC Part Number

(Reow 240°C)

NIC Part Number

(Reow 260°C)

WV Cap. Max. LC (µA) Tan δMax. Ripple Current

+105°C & 100KHz (mArms)

Max. ESR

+20°C & 100KHz (Ω)

Height

(Vdc) (µF) 240°C 260°C

NSP680M2D5TRF N/A

2.0

68 8.1 -0.06 2,000 0.028 1.1±0.1

N/A NSP101M2D2ATRF 100 -20.0 0.06 2,500 0.018 1.8±0.1

N/A NSP101M2D2XATRF 100 -20.0 0.06 2,700 0.015 1.8±0.1

N/A NSP101M2D2ZATRF 100 -20.0 0.06 3,000 0.009 1.8±0.1

N/A NSP121M2D2ATRF 120 - 24.0 0.06 2,500 0.018 1.8±0.1

N/A NSP121M2D2XATRF 120 - 24.0 0.06 2,700 0.015 1.8±0.1

N/A NSP121M2D2ZATRF 120 - 24.0 0.06 3,000 0.009 1.8±0.1

N/A NSP151M2D2ATRF 150 - 30.0 0.06 2,500 0.018 1.8±0.1

N/A NSP151M2D2ZATRF 150 - 30.0 0.06 3,000 0.009 1.8±0.1

N/A NSP181M2D2ATRF 180 - 36.0 0.06 2,500 0.018 1.8±0.1

N/A NSP221M2D2ATRF 220 - 26.4 0.06 2,500 0.018 1.8±0.1

N/A NSP221M2D2ZATRF 220 - 44.0 0.06 3,000 0.009 1.8±0.1

N/A NSP271M2D4ATRF 270 - 54.0 0.10 3,300 0.012 4.2±0.1

N/A NSP271M2D4XATRF 270 - 54.0 0.10 3,500 0.010 4.2±0.1

N/A NSP331M2D3ATRF 330 - 66.0 0.10 3,000 0.015 2.8±0.2

N/A NSP331M2D3XATRF 330 - 66.0 0.10 3,300 0.012 2.8±0.2

N/A NSP331M2D3YATRF 330 - 66.0 0.10 3,400 0.009 2.8±0.2

N/A NSP331M2D4ATRF 330 - 66.0 0.10 3,300 0.012 4.2±0.1

N/A NSP331M2D4XATRF 330 - 66.0 0.10 3,500 0.010 4.2±0.1

N/A NSP391M2D3ATRF 390 - 78.0 0.10 3,000 0.015 2.8±0.2

N/A NSP391M2D3YATRF 390 - 78.0 0.10 3,400 0.009 2.8±0.2

N/A NSP391M2D4ATRF 390 - 78.0 0.10 3,300 0.012 4.2±0.1

N/A NSP391M2D4XATRF 390 - 78.0 0.10 3,500 0.010 4.2±0.1

N/A NSP391M2D4YATRF 390 - 78.0 0.10 3,700 0.007 4.2±0.1

N/A NSP471M2D4ATRF 470 - 94.0 0.10 3,300 0.012 4.2±0.1

N/A NSP471M2D3YATRF 470 - 94.0 0.10 3,400 0.009 2.8±0.1

N/A NSP471M2D4XATRF 470 - 94.0 0.10 3,500 0.010 4.2±0.1

N/A NSP471M2D4YATRF 470 - 94.0 0.10 3,700 0.007 4.2±0.1

N/A NSP561M2D4ATRF 560 -112.0 0.10 3,300 0.012 4.2±0.1

N/A NSP561M2D4YATRF 560 -112.0 0.10 3,700 0.007 4.2±0.1

NSP560M2.5D5TRF N/A

2.5

56 8.4 - 0.06 2,000 0.028 1.1±0.1

N/A NSP820M2.5D2ATRF 82 -20.5 0.06 2,500 0.018 1.8±0.1

N/A NSP820M2.5D2XATRF 82 -20.5 0.06 2,700 0.015 1.8±0.1

N/A NSP101M2.5D2ATRF 100 -25.0 0.06 2,500 0.018 1.8±0.1

N/A NSP101M2.5D2XATRF 100 -25.0 0.06 2,700 0.015 1.8±0.1

N/A NSP101M2.5D2ZATRF 100 -25.0 0.06 3,000 0.009 1.8±0.1

N/A NSP121M2.5D2ATRF 120 - 30.0 0.06 2,500 0.018 1.8±0.1

N/A NSP121M2.5D2ZATRF 120 - 30.0 0.06 3,000 0.009 1.8±0.1

N/A NSP151M2.5D2ATRF 150 - 37.5 0.06 2,500 0.018 1.8±0.1

N/A NSP151M2.5D2ZATRF 150 - 37.5 0.06 3,000 0.009 1.8±0.1

N/A NSP221M2.5D3ATRF 220 -55.0 0.10 3,000 0.015 2.8±0.2

N/A NSP221M2.5D3XATRF 220 -55.0 0.10 3,300 0.012 2.8±0.2

N/A NSP221M2.5D3YATRF 220 - 78.0 0.10 3,400 0.009 2.8±0.2

N/A NSP221M2.5D4ATRF 220 -55.0 0.10 3,300 0.012 4.2±0.1

N/A NSP221M2.5D4XATRF 220 -55.0 0.10 3,500 0.010 4.2±0.1

N/A NSP271M2.5D3ATRF 270 - 67.5 0.10 3,000 0.015 2.8±0.2

N/A NSP271M2.5D3YATRF 270 - 78.0 0.10 3,400 0.009 2.8±0.2

N/A NSP271M2.5D4ATRF 270 - 67.5 0.10 3,300 0.012 4.2±0.1

N/A NSP271M2.5D4XATRF 270 - 67.5 0.10 3,500 0.010 4.2±0.1

N/A NSP331M2.5D4ATRF 330 - 82.5 0.10 3,300 0.012 4.2±0.1

N/A NSP331M2.5D4XATRF 330 - 82.5 0.10 3,500 0.010 4.2±0.1

N/A NSP331M2.5D4YATRF 330 - 82.5 0.10 3,700 0.007 4.2±0.1

N/A NSP391M2.5D4ATRF 390 - 97.5 0.10 3,300 0.012 4.2±0.1

N/A NSP391M2.5D4YATRF 390 - 97.5 0.10 3,700 0.007 4.2±0.1

N/A NSP471M2.5D4ATRF 470 - 117.5 0.10 3,300 0.012 4.2±0.1

N/A NSP471M2.5D4YATRF 470 - 117.5 0.10 3,700 0.007 4.2±0.1

NSP390M4D5TRF N/A

39 9.3 - 0.06 2,000 0.028 1.1±0.1

NSP470M4D5TRF N/A 47 11.3 - 0.06 2,000 0.028 1.1±0.1

N/A NSP560M4D2ATRF 56 - 22.4 0.06 2,500 0.018 1.8±0.1

N/A NSP560M4D2XATRF 56 - 22.4 0.06 2,700 0.015 1.8±0.1

N/A NSP680M4D2ATRF 68 - 27.2 0.06 2,500 0.018 1.8±0.1

Not Recommended for New Designs

Note: The following parts are supported but not recommended for new designs

Continue on next page

7NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

SPECIFICATIONS ARE SUBJECT TO CHANGE

NIC Part Number

(Reow 240°C)

NIC Part Number

(Reow 260°C)

WV Cap. Max. LC (µA) Tan δMax. Ripple Current

+105°C & 100KHz (mArms)

Max. ESR

+20°C & 100KHz (Ω)

Height

(Vdc) (µF) 240°C 260°C

N/A NSP680M4D2XATRF

4.0

68 27.2 0.06 2,700 0.015 1.8±0.1

N/A NSP820M4D2ATRF 82 32.8 0.06 2,500 0.018 1.8±0.1

N/A NSP820M4D2XATRF 82 32.8 0.06 2,700 0.015 1.8±0.1

N/A NSP820M4D2ZATRF 82 32.8 0.06 3,000 0.009 1.8±0.1

N/A NSP101M4D2ATRF 100 40.0 0.06 1,800 0.018 1.8±0.1

N/A NSP121M4D3ATRF 120 - 48.0 0.10 3,000 0.015 2.8±0.2

N/A NSP121M4D3XATRF 120 - 48.0 0.10 3,300 0.012 2.8±0.2

N/A NSP151M4D3ATRF 150 -60.0 0.10 3,000 0.015 2.8±0.2

N/A NSP151M4D3XATRF 150 -60.0 0.10 3,300 0.012 2.8±0.2

N/A NSP151M4D3YATRF 150 -60.0 0.10 3,400 0.009 2.8±0.2

N/A NSP181M4D3ATRF 180 - 72.0 0.10 2,500 0.018 2.8±0.2

N/A NSP181M4D4ATRF 180 - 72.0 0.10 3,300 0.012 4.2±0.1

N/A NSP181M4D3YATRF 180 - 72.0 0.10 3,400 0.009 2.8±0.2

N/A NSP181M4D4XATRF 180 - 72.0 0.10 3,500 0.010 4.2±0.1

N/A NSP221M4D4ATRF 220 -88.0 0.10 3,300 0.012 4.2±0.1

N/A NSP221M4D4XATRF 220 -88.0 0.10 3,500 0.010 4.2±0.1

N/A NSP221M4D4YATRF 220 -88.0 0.10 3,700 0.007 4.2±0.1

N/A NSP271M4D4ATRF 270 - 108.0 0.10 3,300 0.012 4.2±0.1

N/A NSP271M4D4YATRF 270 - 108.0 0.10 3,700 0.007 4.2±0.1

N/A NSP331M4D4ATRF 330 - 132.0 0.10 3,700 0.012 4.2±0.1

N/A NSP100M6.3D2ATRF 10 6.3 0.06 1,400 0.055 1.8±0.1

N/A NSP220M6.3D2ATRF 22 13.9 0.06 1,600 0.040 1.8±0.1

N/A NSP330M6.3D2ATRF 33 20.8 0.06 2,000 0.028 1.8±0.1

NSP330M6.3D5TRF N/A

6.3

33 8.3 - 0.06 2,000 0.028 1.1±0.1

N/A NSP470M6.3D2ATRF 47 29.6 0.06 2,500 0.018 1.8±0.1

N/A NSP470M6.3D2XATRF 47 29.6 0.06 2,700 0.015 1.8±0.1

NSP560M6.3D2ZTRF N/A 56 14.1 - 0.06 3,000 0.009 1.8±0.1

N/A NSP680M6.3D2ATRF 68 - 42.8 0.06 2,500 0.018 1.8±0.1

N/A NSP680M6.3D2XATRF 68 - 42.8 0.06 2,700 0.015 1.8±0.1

N/A NSP101M6.3D3ATRF 100 - 63.0 0.10 3,000 0.015 2.8±0.2

N/A NSP101M6.3D3XATRF 100 - 63.0 0.10 3,300 0.012 2.8±0.2

N/A NSP121M6.3D3ATRF 120 - 75.6 0.10 3,000 0.015 2.8±0.2

N/A NSP121M6.3D3XATRF 120 - 75.6 0.10 3,300 0.012 2.8±0.2

N/A NSP151M6.3D3ATRF 150 - 94.5 0.10 2,500 0.018 2.8±0.2

N/A NSP151M6.3D4ATRF 150 - 94.5 0.10 3,300 0.012 4.2±0.1

N/A NSP151M6.3D4XATRF 150 - 94.5 0.10 3,500 0.010 4.2±0.1

N/A NSP181M6.3D4ATRF 180 - 113.4 0.10 3,300 0.012 4.2±0.1

N/A NSP181M6.3D4XATRF 180 - 113.4 0.10 3,500 0.010 4.2±0.1

NSP181M6.3D4YTRF N/A 180 45.4 - 0.10 3,700 0.007 4.2±0.1

NSP181M6.3D4ZTRF N/A 180 45.4 - 0.10 4,000 0.005 4.2±0.1

N/A NSP221M6.3D4ATRF 220 - 138.6 0.10 3,000 0.015 4.2±0.1

N/A NSP8R2M8D2ATRF

8.0

8.2 - 6.3 0.06 1,400 0.055 1.8±0.1

N/A NSP150M8D2ATRF 15 -12.0 0.06 1,600 0.040 1.8±0.1

N/A NSP220M8D2ATRF 22 - 17.6 0.06 2,000 0.028 1.8±0.1

NSP220M8D5TRF N/A 22 7.0 - 0.06 2,000 0.028 1.1±0.1

N/A NSP330M8D2ATRF 33 - 26.4 0.06 2,500 0.018 1.8±0.1

N/A NSP470M8D2ATRF 47 - 37.6 0.06 1,800 0.025 1.8±0.1

N/A NSP680M8D3ATRF 68 - 54.4 0.10 3,000 0.015 2.8±0.2

N/A NSP101M8D3ATRF 100 -80.0 0.10 2,500 0.018 2.8±0.2

NSP101M8D4TRF NSP101M8D4ATRF 100 32.0 80.0 0.10 3,300 0.012 4.2±0.1

N/A NSP151M8D4ATRF 150 -120.0 0.10 3,000 0.015 4.2±0.1

N/A NSP220M10D2ATRF

22 -22.0 0.06 1,600 0.030 1.8±0.1

N/A NSP330M10D2ATRF 33 - 33.0 0.06 1,800 0.025 1.8±0.1

N/A NSP390M10D2ATRF 39 - 39.0 0.06 1,800 0.025 1.8±0.1

NSP4R7M12.5D2TRF N/A

12.5

4.7 3.0 - 0.06 1,000 0.080 1.8±0.1

NSP100M12.5D2TRF N/A 10 5.0 -0.06 1,000 0.060 1.8±0.1

NSP150M12.5D5TRF N/A 15 7.5 - 0.06 1,400 0.040 1.1±0.1

NSP150M12.5D2TRF N/A 15 7.5 - 0.06 1,300 0.050 1.8±0.1

NSP220M12.5D2TRF N/A 22 11.0 -0.06 1,600 0.030 1.8±0.1

NSP2R2M16D2TRF N/A 16 2.2 3.0 - 0.06 1,000 0.110 1.8±0.1

NSP4R7M16D2TRF N/A 4.7 3.0 - 0.06 1,000 0.080 1.8±0.1

Not Recommended for New Designs

Note: The following parts are supported but not recommended for new designs

Surface Mount Specialty Polymer Solid Aluminum

Electrolytic Capacitors NSP Series

Continue on next page

8NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

SPECIFICATIONS ARE SUBJECT TO CHANGE

NIC Part Number

(Reow 240°C)

NIC Part Number

(Reow 260°C)

WV Cap. Max. LC (µA) Tan δMax. Ripple Current

+105°C & 100KHz (mArms)

Max. ESR

+20°C & 100KHz (Ω)

Height

(Vdc) (µF) 240°C 260°C

NSP6R8M16D2TRF N/A 16 6.8 4.4 - 0.06 1,000 0.070 1.8±0.1

NSP8R2M16D2TRF N/A 8.2 5.2 -0.06 1,300 0.045 1.8±0.1

Not Recommended for New Designs

Note: The following parts are supported but not recommended for new designs

If Peak Soldering Temperature is Maximum Time Above +200°C is

240°C, 5 seconds max. 30 seconds

230°C, 5 seconds max. 40 seconds

COMPONENT SURFACE TEMP. (oC)

RECOMMENDED 240°C REFLOW SOLDERING PROFILE

150°C ~ 200°C

NATURAL COOLING

240oC Max.

250

200

150

100

Time above

200°C

120 Seconds

5 Seconds Max.

Time (Seconds)

DURATION ABOVE 200°C (FOR 240°C REFLOW PARTS)

Notes:

1. SAC alloy (+217°C) reow soldering compatible

2. Soldering heat limits apply to the top surface of component

3. If you have concerns about your reow soldering prole review them with NIC

to insure compatible [tpmg@niccomp.com]

4. Two passes through the reow process are allowed (cooling down period

between process).

Surface Mount Specialty Polymer Solid Aluminum

Electrolytic Capacitors NSP Series

If Peak Soldering Temperature is Maximum Time Above +230°C is

260°C, 10 seconds max. 40 seconds

255°C, 10 seconds max. 50 seconds

250°C, 10 seconds max. 60 seconds

COMPONENT SURFACE TEMP. (oC)

RECOMMENDED 260°C REFLOW SOLDERING PROFILE

NATURAL COOLING

260oC Max.

10 Seconds Max.

230

Time above

230°C

120 Seconds

150oC ~ 200°C

PREHEAT

Time (Seconds)

250

150

200

100

DURATION ABOVE 230°C (FOR 260°C REFLOW PARTS)

9NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

SPECIFICATIONS ARE SUBJECT TO CHANGE

Surface Mount Specialty Polymer Solid Aluminum

Electrolytic Capacitors NSP Series

RECOMMENDED LAND PATTERNS (mm)

DIMENSIONS (mm)

Please note the NSP series will t on standard

“D” and “E” size (7343) tantalum chip capacitor

land patterns

PART MARKING

Capacitance (µF)

Anode Polarity Indicator

Voltage Code

Date Code

64721

VOLTAGE CODES

Case Code L ±0.4 W ±0.3 HW1 ±0.2 S ±0.3

D2 ~ D6 7.3 4.3 see values table 2.4 1.3

Voltage Code

2.0Vdc D

2.5Vdc E

4.0Vdc G

6.3Vdc J

8Vdc K

10Vdc A

12.5Vdc B

16Vdc C

Case Code A B C

D2 ~ D6 2.8 4.0 8.8

CARRIER TAPE DIMENSIONS (mm)

REEL DIMENSIONS (mm)

R:1.0

Case

Code A±0.2 B±0.2 DφE±0.1 F±0.1 Po±0.1 P1±0.1 t±0.2 W±0.3

7.7 4.6 1.5 +0.1 5.50 1.75 4.0 8.0

1.5

12.0

D2, D6 2.4

D3 3.5

D4 4.3

A±2.0 B min. C±0.5 D±0.8 E±0.5 T±1.0 t W±1.0

330 80 13.0 21.0 2.0 20.0 3.0 14

Case

Code

Reel

Quantity

D5, D6,

D2 3,500

D3, D4 2,000