Ordering information AC-DC Power Supplies Power Module type DPF1000 DPF 1000 1 2 1Series name 2Output wattage R DPF MODEL AC INPUT[V] MAX OUTPUT WATTAGE[W] DC OUTPUT VOLTAGE[V] DPF1000 AC85 - 264 1,000 DC360 AC170 - 264 1,500 SPECIFICATIONS INPUT OUTPUT PROTECTION CIRCUIT AND OTHERS ISOLATION ENVIRONMENT SAFETY OTHERS MODEL VOLTAGE[V] POWER FACTOR CORRECTION RANGE[V] CURRENT[A] FREQUENCY[Hz] INRUSH CURRENT[A] EFFICIENCY[%] POWER FACTOR LEAKAGE CURRENT[mA] *1 WATTAGE[W] *2 VOLTAGE[V] VOLTAGE ACCURACY[V] *3 OVERVOLTAGE PROTECTION[V] IOG ENA AUX OTHERS INPUT-OUTPUT INPUT, OUTPUT-FG OPERATING TEMP.,HUMID.AND ALTITUDE *4 STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS HARMONIC ATTENUATOR CASE SIZE/WEIGHT COOLING METHOD DPF1000 AC85 - 264 1f AC85 - 255 1f 11.5typ (ACIN 100V) 50/60 (47 - 63) 8.5typ (ACIN 200V) Limited by external resistance 90typ (ACIN 100V) 95typ (ACIN 200V) 0.98typ (ACIN 100V) 0.95typ (ACIN 200V) 0.75max (60Hz, According to IEC60950 and DEN-AN) 1,000 1,500 DC360 t20 DC400 - 450 The power factor corrector function stops Inverter operation monitoring, Open-collector output, Maximum sink current 10mA, Maximum allowance voltage 35V Enable signal, Open-collector output, Maximum sink current 10mA, Maximum allowance voltage 35V Auxiliary power supply for external signal, Output voltage:6.5 - 8.5V maximum, Output current:10mA Parallel operation possible (Current balancing function), N+1 redundant operation possible, Thermal protection Non isolated AC3,000V 1minute Cutoff current = 10mA, DC500V, 50MWmin (20t15C) -20 to +85C (Aluminum base plate), 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max -40 to +85C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max 10 - 55Hz, 49.0m/s2 (5G), 3minutes period, 60minutes each along X, Y and Z axis 196.1m/s2 (20G), 11ms, once each X, Y and Z axis UL60950-1, C-UL, EN60950-1, EN50178 Complies with DEN-AN and IEC60950-1 Complies with IEC61000-3-2 *5 118.6X12.7X85mm [4.67X0.5X3.35 inches] (WXHXD) /200g max Conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink) *1 Refer to Input voltage derating. *2 When the input voltage is more than 255V, the power factor corrector function stops, and the output voltage becomes rectified AC input voltage. *3 The value included the output setting and the line regulation, the load regulation and the temperature regulation. However, the input voltage is in the power factor correction range. DPF-2 AC170 - 264 1f *4 Please consult us in regard to use from -40C. *5 Please contact us about class C. * External components are required. Refer to standard connection method. DPF1000 External view Aluminum Base Plate 106.68 0.31 2.54 - VOUT +VOUT R 0.31 [0.01] 1t0.1 [0.04] [2.0] 4-3.5 [0.14] 106.68 ]= inches Weight: 200g max Tolerance: t0.3 [t0.012] Dimensions in mm,[ ]= inches Base Plate: Aluminum Mounting torque * Mounting hole screwing torque 0.4N*m(5.0kgf*cm)max A SIGNAL PIN [0.02] +1 3.0 -0.5 [0.12] 3.0t0.5 [0.12] [1.75] Dimensions in mm,[ Div. : 0.5inch [0.1] 4-0.6t0.1 [0.03] 44.7 [0.1] [4.2] [4.2] t=0.8t0.1 2.54 [0.55] AC2 2.54 AC IN/DC OUT PIN 2.54 AC1 [0.1] [0.1] 13.97 2.54 AC IN [1.76] 21.59 [0.1] AUX IOG CB ENA [0.85] 44.7 [0.55] 2.54 SIGNAL PIN Name Plate A 13.97 [4] 4-M3 Mounting Hole (FG) [0.1] 101.6 t0.5 DC OUT Lot No. [4.67] [0.5] 118.6t1 50.8 21.59 [0.54] [3.35] [2] [4.2] 12.7t0.5 106.68 Case (PBT) [0.85] [0.05] 13.97 4-1.2 [0.07] [0.54] 5-1.7 13.97 Recomending size for processing PCB (TOP VIEW) 85t1 50.8 4-M3 Mounting Hole for Heat Sink(FG) Performance data OUTPUT VOLTAGE FOR INPUT STATIC CHARACTERISTICS 390 400 380 V OUTPUT VOLTAGE OUTPUT VOLTAGE V 370 350 330 Input Voltage AC100V Input Voltage AC200V 310 0 0.8 1.6 2.4 3.2 4.0 4.8 5.6 6.4 7.2 320 Output Wattage 1000W Output Wattage 1500W 300 8.0 100 0 140 180 INPUT VOLTAGE A HARMONIC CURRENT (AC100V ) 220 260 V HARMONIC CURRENT (AC230V ) 10.0 10.0 Harmonic current standard of class A (at odd number) A Harmonic current standard of class A (at odd number) A 1.0 1.0 HARMONIC CURRENT HARMONIC CURRENT 340 0 0 OUTPUT CURRENT 0.1 0.01 0.001 360 1 10 20 HARMONIC ORDER 30 40 0.1 0.01 0.001 1 10 20 30 40 HARMONIC ORDER DPF-3 DPF