MURF1620CTG - ON SEMICONDUCTOR

July, 2016 − Rev. 11 1Publication Order Number:

MURF1620CT/D

MURF1620CTG

Switch-mode Power

Rectifier

These state−of−the−art devices are designed for use in switching

power supplies, inverters and as free wheeling diodes.

Features

•Ultrafast 35 Nanosecond Recovery Times

•150°C Operating Junction Temperature

•Epoxy Meets UL 94 V−0 @ 0.125 in

•High Temperature Glass Passivated Junction

•Low Leakage Specified @ 150°C Case Temperature

•Current Derating @ Both Case and Ambient Temperatures

•Electrically Isolated. No Isolation Hardware Required.

•ESD Rating:

♦Human Body Model = 3B (> 8 kV)

♦Machine Model = C (> 400 V)

•This is a Pb−Free Package*

Mechanical Characteristics:

•Case: Epoxy, Molded

•Weight: 1.9 Grams (Approximately)

•Finish: All External Surfaces Corrosion Resistant and Terminal

Leads are Readily Solderable

•Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds

*For additional information on our Pb−Free strategy and soldering details, please

download the ON Semiconductor Soldering and Mounting Techniques

Reference Manual, SOLDERRM/D.

Device Package Shipping†

ORDERING INFORMATION

ISOLATED TO−220

CASE 221AH

ULTRAFAST RECTIFIER

16 AMPERES, 200 VOLTS

MARKING DIAGRAM

A = Assembly Location

Y = Year

WW = Work Week

U1620 = Device Code

G = Pb−Free Package

AKA = Diode Polarity

www.onsemi.com

MURF1620CTG TO−220

(Pb−Free) 50 Units / Rail

†For information on tape and reel specifications,

including part orientation and tape sizes, please

refer t o our Tape and Reel Packaging Specification

Brochure, BRD8011/D.

AYWW

U1620G

AKA

MURF1620CTG

www.onsemi.com

MAXIMUM RATINGS (Per Leg)

Rating Symbol Value Unit

Peak Repetitive Reverse Voltage

Working Peak Reverse Voltage

DC Blocking Voltage

VRRM

VRWM

200 V

Average Rectified Forward Current

Per Diode, (Rated VR), TC = 150°C

Total Device

IF(AV) 8

Peak Repetitive Forward Current

(Rated VR, Square Wave, 20 kHz), TC = 150°CIFM 16 A

Non−repetitive Peak Surge Current

(Surge applied at rated load conditions halfwave, single phase, 60 Hz) IFSM 100 A

Operating Junction and Storage Temperature TJ, Tstg −65 to +150 °C

RMS Isolation Voltage

(t = 0.3 second, R.H. ≤ 30%, TA = 25°C) (Note 1) Viso1 4500 V

Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality

should not be assumed, damage may occur and reliability may be af fected.

1. Proper strike and creepage distance must be provided.

THERMAL CHARACTERISTICS (Per Leg)

Characteristic Symbol Value Unit

Maximum Thermal Resistance, Junction−to−Case RqJC 4.2 °C/W

Lead Temperature for Soldering Purposes: 1/8″ from the Case for 5 seconds TL260 °C

ELECTRICAL CHARACTERISTICS (Per Leg)

Characteristic Symbol Value Unit

Maximum Instantaneous Forward Voltage (Note 2)

(iF = 8.0 A, TC = 150°C)

(iF = 8.0 A, TC = 25°C)

vF0.895

0.975

Maximum Instantaneous Reverse Current (Note 2)

(Rated DC Voltage, TC = 150°C)

(Rated DC Voltage, TC = 25°C)

iR250

5.0

Maximum Reverse Recovery Time

(IF = 1.0 A, di/dt = 50 A/ms)

(IF = 0.5 A, iR = 1.0 A, IREC = 0.25 A)

trr 35

Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product

performance may not be indicated by the Electrical Characteristics if operated under different conditions.

2. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.

VR, REVERSE VOLTAGE (VOLTS)

IR, REVERSE CURRENT (A)m

0.01

0.04

0.1

0.4

1.0

2.0

100

400

1.0 k

20016012080400

100

, INSTANTANEOUS FORWARD CURRENT (AMPS)

5.0

2.0

1.0

0.1

0.2 0.4 0.6 0.8 1.0 1.2

vF, INSTANTANEOUS VOLTAGE (VOLTS)

Figure 1. Typical Forward Voltage, Per Leg

0.3

TJ = 100°C25°C

20 60 100 140 180

TJ = 100°C

25°C

10 k

Figure 2. Typical Reverse Current, Per Leg*

MURF1620CTG

www.onsemi.com

PACKAGE DIMENSIONS

TO−220 FULLPACK, 3−LEAD

CASE 221AH

ISSUE F

DIM MIN MAX

MILLIMETERS

D14.70 15.30

E9.70 10.30

A4.30 4.70

b0.54 0.84

P3.00 3.40

L1 --- 2.80

c0.49 0.79

L12.50 14.73

b2 1.10 1.40

Q2.80 3.20

A2 2.50 2.90

A1 2.50 2.90

H1 6.60 7.10

123

SEATING

PLANE

AA1

NOTES:

1. DIMENSIONING AND TOLERANCING PER ASME

Y14.5M, 1994.

2. CONTROLLING DIMENSION: MILLIMETERS.

3. CONTOUR UNCONTROLLED IN THIS AREA.

4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH AND GATE

PROTRUSIONS. MOLD FLASH AND GATE PROTRUSIONS NOT TO

EXCEED 0.13 PER SIDE. THESE DIMENSIONS ARE TO BE

MEASURED AT OUTERMOST EXTREME OF THE PLASTIC BODY.

5. DIMENSION b2 DOES NOT INCLUDE DAMBAR PROTRUSION.

LEAD WIDTH INCLUDING PROTRUSION SHALL NOT EXCEED 2.00.

6. CONTOURS AND FEATURES OF THE MOLDED PACKAGE BODY

MAY VARY WITHIN THE ENVELOP DEFINED BY DIMENSIONS A1

AND H1 FOR MANUFACTURING PURPOSES.

2.54 BSC

0.14 M

E/2

0.25 M

NOTE 3

FRONT VIEW SIDE VIEW

SECTION D−D

ALTERNATE CONSTRUCTION SECTION A−A

ANOTE 6

NOTE 6

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.

ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor ’s product/patent

coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.

ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.

Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,

regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or

specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer

application by customer ’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not

designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification

in a foreign jurisdiction or any devices intended for implantation in the human body . Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized

application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and

expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such

claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This

literature is subject to all applicable copyright laws and is not for resale in any manner.

UBLICATION ORDERING INFORMATION

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Europe, Middle East and Africa Technical Support:

Phone: 421 33 790 2910

Japan Customer Focus Center

Phone: 81−3−5817−1050

MURF1620CT/D

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor

19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA

Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada

Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada

Email: orderlit@onsemi.com

ON Semiconductor Website: www.onsemi.com

Order Literature: http://www.onsemi.com/orderlit

For additional information, please contact your loc

Sales Representative