1998 Jan 29 491
Philips Components Product specification
Aluminium electrolytic capacitors
Power Long Life Snap-in 058/059 PLL-SI
L
FEATURES
Polarized aluminium electrolytic
capacitors, non-solid
Large types, minimized
dimensions, cylindrical aluminium
case, insulated with a blue sleeve
Pressure relief on the top of the
aluminium case
Charge and discharge proof
Very long useful life:
up to 10000 hours at 105 °C
Extended temperature range:
105 °C
Low ESR, high ripple current
capability.
APPLICATIONS
Computer, telecommunication and
industrial systems
Smoothing and filtering
applications
Standard and switched mode
power supplies
Energy storage in pulse systems.
Fig.1 Component outlines.
handbook, 4 columns
MAM071 - 1
handbook, halfpage
058/059
PLL-SI
CCB008
168/169
PLL-4TSI 056/057
PSM-SI
85 °C
keyed polarity
shock resistant
105 °C
159 PUL-SI
smaller
dimensions
QUICK REFERENCE DATA
DESCRIPTION VALUE
058 059
Case size (Dnom ×Lnom in mm) 22 ×25 to 35 ×50
Rated capacitance range (E6 series), CR33 to 47000 µF
Tolerance on CR±20%
Rated voltage range, UR10 to 100 V 200 to 400 V
Category temperature range 40 to +105 °C
Endurance test at 105 °C50 V: 2000 hours; 63 V: 5000 hours
Useful life at 105 °C50 V: 5000 hours; 63 V: 10000 hours
Useful life at 40 °C and 1.9 ×IR applied 50 V: 125000 hours; 63 V: 250000 hours
Shelf life at 0 V, 105 °C 500 hours
Based on sectional specification IEC 384-4/CECC 30300
Detail specification CECC 30301-807
Climatic category IEC 68 40/105/56
1998 Jan 29 492
Philips Components Product specification
Aluminium electrolytic capacitors
Power Long Life Snap-in 058/059 PLL-SI
L
Selection chart for CR, UR and relevant nominal case sizes (D×L in mm) for 058 series
Preferred types in bold.
CR
(µF) UR (V)
10 16 25 40 50 63 100
330 −−−−−−22 ×25
470 −−−−−−22 ×30
680 −−−−−22 ×25 25 ×30
−−−−−−22 ×40
1000 −−−−22 ×25 22 ×30 30 ×30
−−−−−−25 ×40
1500 −−−22 ×25 22 ×30 25 ×30 30 ×40
−−−−−22 ×40 25 ×50
2200 −−22 ×25 22 ×30 25 ×30 30 ×30 35 ×40
−−−−22 ×40 25 ×40 30 ×50
3300 22 ×25 22 ×30 25 ×30 30 ×30 30 ×40 35 ×50
−−−22 ×40 25 ×40 25 ×50
4700 22 ×25 22 ×30 25 ×30 30 ×30 30 ×40 35 ×40
−−22 ×40 25 ×40 25 ×50 30 ×50
6800 22 ×30 25 ×30 30 ×30 30 ×40 35 ×40 35 ×50
22 ×40 25 ×40 25 ×50 30 ×50 −−
10000 25 ×30 30 ×30 30 ×40 35 ×40 35 ×50 −−
22 ×40 25 ×40 25 ×50 30 ×50 −−−
15000 30 ×30 30 ×40 35 ×40 35 ×50 −−−
25 ×40 25 ×50 30 ×50 −−−−
22000 30 ×40 35 ×40 35 ×50 −−−−
25 ×50 30 ×50 −−−−−
33000 35 ×40 35 ×50 −−−−−
30 ×50 −−−−−−
47000 35 ×50 −−−−−−
1998 Jan 29 493
Philips Components Product specification
Aluminium electrolytic capacitors
Power Long Life Snap-in 058/059 PLL-SI
L
Selection chart for CR, UR and relevant nominal case sizes (D×L in mm) for 059 series
Preferred types in bold.
MARKING
The capacitors are marked (where possible) with the following information:
Rated capacitance (in µF)
Tolerance code on rated capacitance (M for ±20%)
Rated voltage (in V)
Climatic category in accordance with
“IEC 68”
Date code (year and week) in accordance with
“IEC 62”
Code for factory of origin
Name of manufacturer
Minus-sign to indicate the negative terminal, visible from the top and side of the capacitor
Code number (last 8 digits)
Code for basic specification in accordance with
“IEC 384-4-1”
and
“CECC 30301”
.
CR
(µF) UR (V)
200 250 385 400
33 −−22 ×25
47 −−22 ×30 22 ×30
68 22 ×25 22 ×35 22 ×35
−−25 ×30 25 ×30
100 22 ×25 22 ×30 30 ×30 30 ×30
−−25 ×40 25 ×40
150 22 ×30 22 ×35 25 ×50 30 ×35
25 ×30 30 ×40 25 ×50
220 22 ×35 30 ×30 35 ×40 35 ×40
25 ×30 25 ×35 30 ×50 30 ×50
330 30 ×30 30 ×35 35 ×50 35 ×50
25 ×40 25 ×50 −−
470 30 ×35 35 ×35 −−
25 ×50 30 ×45 −−
680 35 ×35 35 ×45 −−
30 ×45 −−−
1000 35 ×50 −−−
1998 Jan 29 494
Philips Components Product specification
Aluminium electrolytic capacitors
Power Long Life Snap-in 058/059 PLL-SI
MECHANICAL DATA AND PACKAGING QUANTITIES
Fig.2 Snap-in.
Dimensions in mm.
For dimensions see Table 1.
The minus terminal can be marked with a black dot or with an imprinted ‘ sign.
handbook, 4 columns
+ TERMINAL
TERMINAL
CCA994
D
L + 2 max.L
5.8 0
1
Bottom view
Fig.3 Mounting hole diagram.
Dimensions in mm.
handbook, 2 columns
CCA995
10
±0.1
2 ±0.1 (2×)
Table 1 Physical dimensions, mass and packaging information; see Fig.2
NOMINAL
CASE SIZE
D×L
(mm)
CASE
CODE Dmax
(mm) Lmax
(mm) MASS
(g)
PACKAGING
QUANTITIES
(units per box)
CARDBOARD BOX
DIMENSIONS
l×w×h
(mm)
22 ×25 2225 23 27 12 100 260 ×250 ×39
22 ×30 2230 23 32 16 100 260 ×250 ×44
22 ×35 2235 23 37 20 100 260 ×250 ×49
22 ×40 2240 23 42 23 100 260 ×250 ×54
25 ×30 2530 26 32 22 100 290 ×280 ×44
25 ×35 2535 26 37 24 100 290 ×280 ×49
25 ×40 2540 26 42 27 100 290 ×280 ×54
25 ×50 2550 26 52 38 100 290 ×280 ×64
30 ×30 3030 31 32 30 100 340 ×330 ×44
30 ×35 3035 31 37 35 100 340 ×330 ×49
30 ×40 3040 31 42 40 100 340 ×330 ×54
30 ×45 3045 31 47 45 100 340 ×330 ×59
30 ×50 3050 31 52 50 100 340 ×330 ×64
35 ×35 3535 36 37 48 50 390 ×198 ×49
35 ×40 3540 36 42 55 50 390 ×198 ×54
35 ×45 3545 36 47 63 50 390 ×198 ×59
35 ×50 3550 36 52 72 50 390 ×198 ×64
1998 Jan 29 495
Philips Components Product specification
Aluminium electrolytic capacitors
Power Long Life Snap-in 058/059 PLL-SI
L
ELECTRICAL DATA AND ORDERING INFORMATION
Unless otherwise specified, all electrical values in Tables 2 and 3 apply at
Tamb =20°C, P = 86 to 106 kPa, RH = 45 to 75%.
SYMBOL DESCRIPTION
CRrated capacitance at 100 Hz
IRrated RMS ripple current at 100 Hz or 10 kHz and 105 °C
IL1 max. leakage current after 1 minute at UR
IL5 max. leakage current after 5 minutes at UR
ESR max. equivalent series resistance at 100 Hz
Z max. impedance at 10 kHz
Ordering example
Electrolytic capacitor 058 series
10000 µF/25 V; ±20%
Nominal case size: 30 ×40 mm
Catalogue number: 2222 058 56103.
Table 2 Electrical data and ordering information for 058 series; preferred types in bold
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
D×L
(mm)
CASE
CODE
IR
100 Hz
105 °C
(A)
IR
10 kHz
105 °C
(A)
IL1
1 min
(µA)
IL5
5 min
(µA)
ESR
100 Hz
(m)
Z
10 kHz
(m)
CATALOGUE
NUMBER
2222 ... .....
10 4700 22 ×25 2225 1.95 2.30 286 98 82 57 058 54472
6800 22 ×30 2230 2.44 2.88 412 140 61 44 058 54682
10000 25 ×30 2530 2.81 3.32 604 204 54 42 058 54103
10000 22 ×40 2240 3.29 3.88 604 204 43 32 058 44103
15000 30 ×30 3030 3.53 4.17 904 304 42 34 058 54153
15000 25 ×40 2540 3.78 4.46 904 304 38 30 058 44153
22000 30 ×40 3040 4.62 5.45 1324 444 31 25 058 54223
22000 25 ×50 2550 4.68 5.52 1324 444 31 24 058 44223
33000 35 ×40 3540 5.15 6.08 1984 664 30 24 058 54333
33000 30 ×50 3050 5.70 6.73 1984 664 24 21 058 44333
47000 35 ×50 3550 6.23 7.35 2824 944 24 21 058 54473
16 3300 22 ×25 2225 1.90 2.24 321 110 86 57 058 55332
4700 22 ×30 2230 2.36 2.78 455 154 65 44 058 55472
6800 25 ×30 2530 2.75 3.25 657 222 56 42 058 55682
6800 22 ×40 2240 3.18 3.75 657 222 46 32 058 45682
10000 30 ×30 3030 3.44 4.06 964 324 44 34 058 55103
10000 25 ×40 2540 3.66 4.32 964 324 40 30 058 45103
15000 30 ×40 3040 4.55 5.37 1444 484 32 25 058 55153
15000 25 ×50 2550 4.55 5.37 1444 484 32 24 058 45153
22000 35 ×40 3540 5.07 5.98 2116 708 31 24 058 55223
22000 30 ×50 3050 5.67 6.69 2116 708 25 21 058 45223
33000 35 ×50 3550 6.23 7.35 3172 1060 25 21 058 55333
1998 Jan 29 496
Philips Components Product specification
Aluminium electrolytic capacitors
Power Long Life Snap-in 058/059 PLL-SI
25 2200 22 ×25 2225 1.76 2.08 334 114 100 57 058 56222
3300 22 ×30 2230 2.23 2.63 499 169 73 44 058 56332
4700 25 ×30 2530 2.60 3.07 709 239 62 42 058 56472
4700 22 ×40 2240 3.00 3.54 709 239 52 32 058 46472
6800 30 ×30 3030 3.26 3.85 1024 344 49 34 058 56682
6800 25 ×40 2540 3.49 4.12 1024 344 44 30 058 46682
10000 30 ×40 3040 4.37 5.16 1504 504 35 25 058 56103
10000 25 ×50 2550 4.37 5.16 1504 504 35 24 058 46103
15000 35 ×40 3540 4.91 5.79 2254 754 33 24 058 56153
15000 30 ×50 3050 5.43 6.41 2254 754 27 21 058 46153
22000 35 ×50 3550 6.07 7.16 3304 1104 27 21 058 56223
40 1500 22 ×25 2225 1.65 2.01 364 124 114 65 058 57152
2200 22 ×30 2230 2.04 2.49 532 180 87 50 058 57222
3300 25 ×30 2530 2.43 2.99 796 268 71 45 058 57332
3300 22 ×40 2240 2.78 3.39 796 268 60 37 058 47332
4700 30 ×30 3030 2.96 3.61 1132 380 59 40 058 57472
4700 25 ×40 2540 3.26 3.90 1132 380 51 32 058 47472
6800 30 ×40 3040 3.94 4.81 1636 548 42 29 058 57682
6800 25 ×50 2550 4.10 5.00 1636 548 39 26 058 47682
10000 35 ×40 3540 4.18 5.10 2404 804 46 29 058 57103
10000 30 ×50 3050 4.98 6.08 2404 804 36 24 058 47103
15000 35 ×50 3550 5.21 6.36 3604 1204 36 24 058 57153
50 1000 22 ×25 2225 1.50 1.83 304 104 138 69 058 51102
1500 22 ×30 2230 1.88 2.29 454 154 102 54 058 51152
2200 25 ×30 2530 2.27 2.77 664 124 82 47 058 51222
2200 22 ×40 2240 2.55 3.11 664 124 71 38 058 41222
3300 30 ×30 3030 2.81 3.43 994 334 66 41 058 51332
3300 25 ×40 2540 3.07 3.75 994 334 57 33 058 41332
4700 30 ×40 3040 3.77 4.60 1414 474 47 30 058 51472
4700 25 ×50 2550 3.85 4.70 1414 474 43 27 058 41472
6800 35 ×40 3540 4.01 4.89 2044 684 49 30 058 51682
6800 30 ×50 3050 4.74 5.78 2044 684 38 24 058 41682
10000 35 ×50 3550 5.04 6.15 3004 1004 38 24 058 51103
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
D×L
(mm)
CASE
CODE
IR
100 Hz
105 °C
(A)
IR
10 kHz
105 °C
(A)
IL1
1 min
(µA)
IL5
5 min
(µA)
ESR
100 Hz
(m)
Z
10 kHz
(m)
CATALOGUE
NUMBER
2222 ... .....
1998 Jan 29 497
Philips Components Product specification
Aluminium electrolytic capacitors
Power Long Life Snap-in 058/059 PLL-SI
L
63 680 22 ×25 2225 1.17 1.43 261 90 228 150 058 58681
1000 22 ×30 2230 1.46 1.78 382 130 170 115 058 58102
1500 25 ×30 2530 1.76 2.15 571 193 137 85 058 58152
1500 22 ×40 2240 2.00 2.44 571 193 115 85 058 48152
2200 30 ×30 3030 2.27 2.77 836 281 101 70 058 58222
2200 25 ×40 2540 2.40 2.93 836 281 94 70 058 48222
3300 30 ×40 3040 3.07 3.75 1251 420 70 50 058 58332
3300 25 ×50 2550 3.07 3.75 1251 420 70 50 058 48332
4700 35 ×40 3540 3.65 4.45 1781 596 60 45 058 58472
4700 30 ×50 3050 3.88 4.73 1781 596 53 45 058 48472
6800 35 ×50 3550 4.58 5.59 2574 861 46 35 058 58682
100 330 22 ×25 2225 0.92 1.12 202 70 370 250 058 59331
470 22 ×30 2230 1.14 1.39 286 98 280 190 058 59471
680 25 ×30 2530 1.35 1.65 412 140 232 140 058 59681
680 22 ×40 2240 1.57 1.92 412 140 190 140 058 49681
1000 30 ×30 3030 1.79 2.40 604 204 163 115 058 59102
1000 25 ×40 2540 1.85 2.26 604 204 158 115 058 49102
1500 30 ×40 3040 2.45 2.99 904 304 111 85 058 59152
1500 25 ×50 2550 2.38 2.90 904 304 116 85 058 49152
2200 35 ×40 3540 3.05 3.72 1324 444 86 65 058 59222
2200 30 ×50 3050 3.13 3.82 1324 444 82 65 058 49222
3300 35 ×50 3550 3.84 4.68 1984 664 64 50 058 59332
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
D×L
(mm)
CASE
CODE
IR
100 Hz
105 °C
(A)
IR
10 kHz
105 °C
(A)
IL1
1 min
(µA)
IL5
5 min
(µA)
ESR
100 Hz
(m)
Z
10 kHz
(m)
CATALOGUE
NUMBER
2222 ... .....
1998 Jan 29 498
Philips Components Product specification
Aluminium electrolytic capacitors
Power Long Life Snap-in 058/059 PLL-SI
Table 3 Electrical data and ordering information for 059 series; preferred types in bold
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
D×L
(mm)
CASE
CODE
IR
100 Hz
105 °C
(A)
IL1
1 min
(µA)
IL5
5 min
(µA)
ESR
100 Hz
(m)
Z
10 kHz
(m)
CATALOGUE
NUMBER
2222 ... .....
200 100 22 ×25 2225 0.53 124 44 1280 730 059 52101
150 22 ×30 2230 0.67 184 64 850 540 059 52151
220 22 ×35 2235 0.86 268 92 610 430 059 32221
220 25 ×30 2530 0.87 268 92 610 430 059 52221
330 30 ×30 3030 1.12 400 136 435 300 059 52331
330 25 ×40 2540 1.12 400 136 435 300 059 42331
470 30 ×35 3035 1.46 568 192 335 225 059 32471
470 25 ×50 2550 1.25 568 192 335 225 059 42471
680 30 ×45 3045 1.87 820 276 235 155 059 32681
680 35 ×35 3535 1.85 820 276 235 155 059 62681
1000 35 ×50 3550 2.45 1204 404 160 125 059 52102
250 68 22 ×25 2225 0.49 106 38 1640 760 059 53689
100 22 ×30 2230 0.62 154 54 1110 570 059 53101
150 22 ×35 2235 0.82 229 79 795 440 059 33151
150 25 ×30 2530 0.82 229 79 795 440 059 53151
220 25 ×35 2535 1.03 334 114 540 300 059 33221
220 30 ×30 3030 1.06 334 114 540 300 059 53221
330 30 ×35 3035 1.43 499 169 385 225 059 33331
330 25 ×50 2550 1.40 499 169 385 225 059 43331
470 30 ×45 3045 1.79 709 239 270 155 059 33471
470 35 ×35 3535 1.79 709 239 270 155 059 63471
680 35 ×45 3545 2.25 1024 344 190 125 059 43681
385 33 22 ×25 2225 0.32 80 29 3860 3000 059 58339
47 22 ×30 2230 0.41 113 40 2710 2100 059 58479
68 22 ×35 2235 0.53 161 56 1870 1460 059 38689
68 25 ×30 2530 0.52 161 56 1870 1460 059 58689
100 30 ×30 3030 0.72 235 81 1270 1010 059 58101
100 25 ×40 2540 0.72 235 81 1270 1010 059 48101
150 30 ×40 3040 0.99 351 119 850 675 059 58151
150 25 ×50 2550 0.99 351 119 850 675 059 48151
220 35 ×40 3540 1.31 512 173 580 465 059 58221
220 30 ×50 3050 1.31 512 173 580 465 059 48221
330 35 ×50 3550 1.75 766 258 390 320 059 58331
1998 Jan 29 499
Philips Components Product specification
Aluminium electrolytic capacitors
Power Long Life Snap-in 058/059 PLL-SI
L
Additional electrical data
400 47 22 ×30 2230 0.30 117 42 4260 3490 059 56479
68 22 ×35 2235 0.38 167 58 2950 2420 059 36689
68 25 ×30 2530 0.41 167 58 2950 2420 059 56689
100 30 ×30 3030 0.55 244 84 2020 1660 059 56101
100 25 ×40 2540 0.55 244 84 2020 1660 059 46101
150 30 ×35 3035 0.68 364 124 1350 1110 059 36151
150 25 ×50 2550 0.78 364 124 1350 1110 059 46151
220 35 ×40 3540 0.94 532 180 930 760 059 56221
220 30 ×50 3050 0.94 532 180 930 760 059 46221
330 35 ×50 3550 1.25 796 260 620 510 059 56331
PARAMETER CONDITIONS VALUE
Voltage
Surge voltage for short periods 250 V versions Us= 1.15 ×UR
385 V versions Us= 1.1 ×UR
Reverse voltage Urev 1V
Current
Leakage current after 1 minute at URIL1 0.006CR×UR+4µA
after 5 minutes at URIL5 0.002CR×UR+4µA
Inductance
Equivalent series inductance (ESL) all case sizes typ. 19 nH
max. 25 nH
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
D×L
(mm)
CASE
CODE
IR
100 Hz
105 °C
(A)
IL1
1 min
(µA)
IL5
5 min
(µA)
ESR
100 Hz
(m)
Z
10 kHz
(m)
CATALOGUE
NUMBER
2222 ... .....
1998 Jan 29 500
Philips Components Product specification
Aluminium electrolytic capacitors
Power Long Life Snap-in 058/059 PLL-SI
Capacitance (C)
handbook, 4 columns
0.7
0.8
0.9
1.0
100 50 0 50 100
C
C0
150
0.6
0.5
0.4
1.1
MRA469
Tamb
( C)
o
1
2
3
Curve 1: UR=63to100V.
Curve 2: UR= 200 V.
Curve 3: UR250 V and 40 V.
C0= capacitance at 20 °C and 100 Hz.
Fig.4 Typical multiplier of capacitance as a function of ambient temperature.
handbook, 4 columns
C
1.1
1.0
0.9
0.8
0.7
0.610 10 10 10
23 4
f (Hz)
C0
MRA465
3
2
1
Curve 1: UR= 10 and 16 V.
Curve 2: UR= 25, 35 and 40 V.
Curve 3: UR>40V.
C
0= capacitance at 20 °C and100 Hz.
Fig.5 Typical multiplier of capacitance as a function of frequency.
1998 Jan 29 501
Philips Components Product specification
Aluminium electrolytic capacitors
Power Long Life Snap-in 058/059 PLL-SI
L
Equivalent series resistance (ESR)
handbook, 4 columns
100 50 0 50 100 150
1
102
103
101
ESR
MRA468
0
ESR
10 1
Tamb
( C)
o
3
2
2, 3
1
1
Curve 1: UR250 V.
Curve 2: UR= 200 V.
Curve 3: UR100 V.
ESR0= typical at 20 °C and 100 Hz.
Fig.6 Typical multiplier of ESR as a function of ambient temperature.
Curve 1: UR=10to100V.
Curve 2: UR= 200 to 400 V.
ESR0= typical at 20 °C and 100 Hz.
Fig.7 Typical multiplier of ESR as a function of frequency.
handbook, 4 columns
010 103104x
102
0.5
1.5
ESR
f (Hz)
1
CCA412
ESR0
1
2
1998 Jan 29 502
Philips Components Product specification
Aluminium electrolytic capacitors
Power Long Life Snap-in 058/059 PLL-SI
Impedance (Z)
handbook, 4 columns
100 50 0 50 100 150
Tamb
( C)
Z
1
101
1
10
10
3
102
MRA467
Z
0
o
1
2
3
Curve 1: UR250 V.
Curve 2: UR= 200 V.
Curve 3: UR100 V.
Z0= typical impedance at 20 °C and 10 kHz.
Fig.8 Typical multiplier of impedance as a function of ambient temperature.
handbook, 4 columns
105
Z
(m)
101103104107
f (Hz)
104
103
102
101
105106
102
MRA470
1
2
3
4
5
6
7
8
9
10
Curve 1: 33 µF.
Curve 2: 68 µF.
Curve 3: 100 µF.
Curve 4: 330 µF.
Curve 5: 680 µF.
Curve 6: 1000 µF.
Curve 7: 1500 µF.
Curve 8: 2200 µF.
Curve 9: 3300 µF.
Curve 10: 4700 µF.
Case D×L=22×25 mm.
Tamb =20°C.
Fig.9 Typical impedance as a function of frequency.
1998 Jan 29 503
Philips Components Product specification
Aluminium electrolytic capacitors
Power Long Life Snap-in 058/059 PLL-SI
L
handbook, 4 columns
105
Z
(m)
101103104107
f (Hz)
104
103
102
101
105106
102
MRA471
1
2
3
4
5
6
7
8
9
10
Curve 2: 100 µF.
Curve 2: 100 µF.
Curve 3: 150 µF.
Curve 4: 470 µF.
Curve 5: 1000 µF.
Curve 6: 1500 µF.
Curve 7: 2200 µF.
Curve 8: 3300 µF.
Curve 9: 4700 µF.
Curve 10: 6800 µF.
Case D×L=22×30 mm.
Tamb =20°C.
Fig.10 Typical impedance as a function of frequency.
handbook, 4 columns
105
Z
(m)
101103104107
f (Hz)
104
103
102
101
105106
102
MRA472
1
2
3
4
5
6
7
8
9
10
Curve 1: 68 µF.
Curve 2: 150 µF.
Curve 3: 220 µF.
Curve 4: 680 µF.
Curve 5: 1500 µF.
Curve 6: 2200 µF.
Curve 7: 3300 µF.
Curve 8: 4700 µF.
Curve 9: 6800 µF.
Curve 10: 10000 µF.
Case D×L=25×30 and 22 ×40 mm.
Tamb =20°C.
Fig.11 Typical impedance as a function of frequency.
1998 Jan 29 504
Philips Components Product specification
Aluminium electrolytic capacitors
Power Long Life Snap-in 058/059 PLL-SI
handbook, 4 columns
105
Z
(m)
101103104107
f (Hz)
104
103
102
101
105106
102
MRA473
1
2
3
4
5
6
7
8
9
10
Curve 1: 100 µF.
Curve 2: 220 µF.
Curve 3: 330 µF.
Curve 4: 1000 µF.
Curve 5: 2200 µF.
Curve 6: 3300 µF.
Curve 7: 4700 µF.
Curve 8: 6800 µF.
Curve 9: 10000 µF.
Curve 10: 15000 µF.
Case D×L=30×30 and 25 ×40 mm.
Tamb =20°C.
Fig.12 Typical impedance as a function of frequency.
handbook, 4 columns
105
Z
(m)
101103104107
f (Hz)
104
103
102
101
105106
102
MRA474
1
2
3
4
5
6
7
8
9
10
Curve 1: 150 µF.
Curve 2: 330 µF.
Curve 3: 470 µF.
Curve 4: 1500 µF.
Curve 5: 3300 µF.
Curve 6: 4700 µF.
Curve 7: 6800 µF.
Curve 8: 10000 µF.
Curve 9: 15000 µF.
Curve 10: 22000 µF.
Case D×L=30×40 and 25 ×50 mm.
Tamb =20°C.
Fig.13 Typical impedance as a function of frequency.
1998 Jan 29 505
Philips Components Product specification
Aluminium electrolytic capacitors
Power Long Life Snap-in 058/059 PLL-SI
L
handbook, 4 columns
105
Z
(m)
101103104107
f (Hz)
104
103
102
101
105106
102
MRA475
1
2
3
4
5
6
7
8
9
10
Curve 1: 220 µF.
Curve 2: 470 µF.
Curve 3: 680 µF.
Curve 4: 2200 µF.
Curve 5: 4700 µF.
Curve 6: 6800 µF.
Curve 7: 10000 µF.
Curve 8: 15000 µF.
Curve 9: 22000 µF.
Curve 10: 33000 µF.
Case D×L=35×40 and 30 ×50 mm.
Tamb =20°C.
Fig.14 Typical impedance as a function of frequency.
handbook, 4 columns
105
Z
(m)
101103104107
f (Hz)
104
103
102
101
105106
102
MRA476
1
2
3
4
5
6
7
8
9
10
Curve 1: 330 µF.
Curve 2: 680 µF.
Curve 3: 1000 µF.
Curve 4: 3300 µF.
Curve 5: 6800 µF.
Curve 6: 10000 µF.
Curve 7: 15000 µF.
Curve 8: 22000 µF.
Curve 9: 33000 µF.
Curve 10: 47000 µF.
Case D×L=35×50 mm.
Tamb =20°C.
Fig.15 Typical impedance as a function of frequency.
1998 Jan 29 506
Philips Components Product specification
Aluminium electrolytic capacitors
Power Long Life Snap-in 058/059 PLL-SI
RIPPLE CURRENT AND USEFUL LIFE
Table 4 Multiplier of ripple current (IR) as a function of frequency
FREQUENCY
(Hz) IR MULTIPLIER
UR=10to25V U
R=40to100V U
R>100 V
50 0.93 0.91 0.86
100 1.00 1.00 1.00
200 1.04 1.05 1.13
400 1.07 1.09 1.21
1000 1.11 1.13 1.29
2000 1.13 1.15 1.32
4000 1.15 1.18 1.35
10000 1.18 1.22 1.40
handbook, full pagewidth
1.3
1.2
1.1
1.0
0.8
0.5
0.040 50 60 70 80 90 Tamb (C)
o
I
A
R
I
MGA454
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
(1)
2.4
2.5
2.6
2.7
100 110
2
7
life multiplier
1
1.2
1.5
2.5
3
4
5
10
15
20
30
40
60
100
150
200
300
400
600
Fig.16 Multiplier of useful life as a function of ambient temperature and ripple current load.
IA= actual ripple current at 100 Hz and 105 °C.
IR= rated ripple current at 100 Hz and 105 °C.
(1) Useful life at 105 °C and IR applied: 5000 hours for 50 V types; 10000 hours for 63 V types.
1998 Jan 29 507
Philips Components Product specification
Aluminium electrolytic capacitors
Power Long Life Snap-in 058/059 PLL-SI
L
SPECIFIC TESTS AND REQUIREMENTS
General tests and requirements are specified in this handbook, Section
“Tests and Requirements”
.
Table 5 Test procedures and requirements
TEST PROCEDURE
(quick reference) REQUIREMENTS
NAME OF TEST REFERENCE
Endurance IEC 384-4/
CECC 30300
subclause 4.13
Tamb = 105 °C; UR applied;
50 V types: 2000 hours;
63 V types: 5000 hours
UR100 V; C/C: ±15%
UR>100 V; C/C: ±10%
Z2×spec. limit
IL5 spec. limit
Useful life CECC 30301
subclause 1.8.1 Tamb = 105 °C; UR and IR applied;
50 V types: 5000 hours;
63 V types: 10000 hours
UR100 V; C/C: ±45%
UR>100 V; C/C: ±30%
Z3×spec. limit
IL5 spec. limit
no short or open circuit,
no visible damage
total failure percentage:
UR100 V: 1%;
UR>100 V: 3%
Shelf life
(storage at
high temperature)
IEC 384-4/
CECC 30300
subclause 4.17
Tamb = 105 °C; no voltage applied;
500 hours
after test: UR to be applied for 30 minutes,
24 to 48 hours before measurement
C/C: ±10%
IL5 2×spec. limit