PRODUCT DATASHEET
4635 Boston Lane
Phone: 512-382-8100
MKTG-DOC-000152
A01
Austin, TX 78735
www.nuventix.com
Revision
Jan 2013 r1
SynJet® LED Cooler R87-46
SynJet cooling technology provides the most reliable thermal
management solution available. This LED cooler has been developed
by Nuventix for cooling downlight and spotli g h t modules and arrays.
• Cools up to 38 W4
• Reliable 100K Hours Lifetime
• Energ y Effic ient
Specifications1
Thermal & Acoustic
SynJet Setting2 Θs-a3
Al TDP4 (W)
ΔT = 30° / 40°C SPL
(dBA)5 Wire Connections
Mid Performance 0.84 36 / 48 25 Red to +VDC
Black & Blue to Ground
Standard Performanc e 0.92 33 / 43 22 Red to +VDC
Black only to Ground
Silent Perf ormance 1.03 29 / 39 19 Red to +VDC
Black & Purple to Ground
PWM at 100% duty cycle 0.79 38 / 51 27
Red to +VDC
Black only to Ground
Blue to PWM Signal
Heatsink Only 2.41 12 N/A N/A N/A
Electrical
SynJet Setting2 Voltage
(VDC)
+/- 10%
Current (mA)
6
Pavg
(mW)
Voltage
(VDC)
+/- 10%
Current (mA)
6
Pavg
(mW)
Imin
Iavg
Ipeak
Imin
Iavg
Ipeak
Mid
5 20
150
300
750
12 10
67
134
800
Standard
95
190
475
50
100
600
Silent
65
130
325
40
80
480
PWM at 100% duty cycle
160
320
800
82
164
980
Environmental
All Settings
Min
Max
Units
Conditions
Operating Temperature
-40
70
°C
Air temperature surrounding cooler
Storage Temperature
-50
75
°C
Air temperature surroundi ng cooler
Storage Altitude
15K
m
Above sea level
Operating Relati ve Humidity
5
95
%
Non-condensing
Weight
335
g
SynJet with A l heat sink
Reliability
100K
hrs
L10 @ 60°C
Regulatory Complianc e
RoHS, U L, F CC Part 15 Class B, CE
Mechanical - SynJet Cooling Sol uti on shown with Configurable heat sink
1 All values are typical at 25ºC unless otherwise stated.
2 The Level Select model should be used for discrete performance settings. Follow the instructions in the Product Design Guide for adjusting settings.
3 Thermal resistanc e valu es ar e given as referenc e only and are measured in free air without airflow obstructions. Thermal resistance is measured from the bottom
middle of the heat sink to ambient air measured at the inlet to the SynJet, with a heat source at least 4.1cm2 using the 60 W reference heat sink. Actual thermal
performance may vary by application and final product design should be tested to assure proper thermal performance.
4 Thermal Design Power is bas ed on a 30ºC or 40ºC temperature rise of heat sink mounting surface above ambient temperature around cooler.
5 Sound Pressure Level is measured at 1 meter distance per ISO 7779.
6 The SynJet has a time varying current. The current waveform is sinusoidal and the average current (Iavg) is used to calculate the average power consumption
(Pavg) at nominal input voltage (VDC). See the Electrical section in the Product Design Guide for a detailed explanation.
• 5 Yr Warranty
• Small Form Factor
• Quiet Acoust ics
PRODUCT DATASHEET
4635 Boston Lane
Phone: 512-382-8100
MKTG-DOC-000152
A01
Austin, TX 78735
www.nuventix.com
Revision
Jan 2013 r1
SynJet Wire Harness Connector Pi n o u t
Part Numbers
Part Number
Description
Notes
NX201100
SynJet, ZFlow 87, PWM, 5V, Black
Use with PWM input to control performance setti ng
NX201101
SynJet, ZFlow 87, Level Select, 5V, Black
Configurable to discret e perf ormance settings
NX201102
SynJet, ZFlow 87, PWM, 12V, Black
Use with PWM input to control performance setti ng
NX201103
SynJet, ZFlow 87, Level Select, 12V, Black
Configurable to discret e perf ormance settings
NX301103
Heatsink, R87-46, Configurable, Black
Contact sales for other heatsink options
NX301109
Heatsink, R87-46, Bridgel ux RS, Black
Contact sales for other heatsink options
NX301110
Heatsink, R87-46, Xicato XSM, Vossloh Schwabe Luga Shop, Black
Contact sales for other heatsink options
NX301111
Heatsink, R87-46, Citizen CLL030, CLL050, Ledi l, Black
Contact sales for other heatsink options
NX301112
Heatsink, R87-46, Osram Soleriq, Ledil, Sharp Megazenigata, Molex,
Black
Contact sales for other heatsink options
NX301113
Heatsink, R87-46, Philips Luxeon K, Black
Contact sales for other heatsink options
WALLS-C4150-001
Wire Harness, 4-Wire, 150 mm Length
Contact sales for other wire harness opt i ons
WALLS-C4600-001
Wire Harness, 4-Wire, 600 mm Length
Contact sales for other wire harness opt i ons
Pin
Wire Color
Symbol
Description
1
Red
+VDC
5 V or 12 V depending on model
2
Black
GND
Ground
3 Purple CTRL2
Input for Level Select model
Status signal for PWM model
4 Blue CTRL1
Input for Level Select model
PWM input for PWM model
Nuventix reserves the right to make changes to the products or information cont ai ned herein without notic e. No
liability is assumed as a result of their use or applications. For addit ional information, please contact Nuventix directly.
IMPOR TAN T: Syn Jets should be compl etely wired to the power supply before the power supply is energized. The power supply s houl d be
turned off before the SynJet Cooler is disconnected. SynJet Coolers are not designed for “hot swap” or “hot plug” applications.
All dimensions are nominal and in mm unless otherwise stated. See product drawings f or more detail.
