Reed Sensors Flange Mounting Sensor > 59150 59150 Flange Mount Sensor + 57150 Actuator Description The 59150 is a flange mounting reed sensor 28.57mm x 19.05mm x 6.35mm (1.125" x 0.750" x 0.250") with a choice of normally open, normally open high voltage, normally closed or changeover contacts. Its case design enables screw or adhesive mounting and the wires exit from top right hand side. It is also available with left hand exit - see 59145 Series. It is capable of switching up to 265Vac/300Vdc at 10VA. The 59150 functions best with the matching actuator 57150-000. Note: The 57150 Actuator is sold separately. Features * Two-part magnetically operated proximity sensor * Case design allows screw down or adhesive mounting Agency Approvals Agency * Customer defined sensitivity * Choice of cable and connector Agency File Number Benefits E61760 * Hermetically sealed, magnetically operated contacts continue to operate long after optical and other technologies fail due to contamination Note: Contact Littelfuse for specific agency approval ratings. Dimensions * No standby power requirement * Operates through non-ferrous materials such as wood, plastic or aluminium * Simple installation and adjustment Dimensions in mm (inch) Applications 28.57 (1.125) 14.28 (.562) 9.53 (.375) Actuator 19.05 (.75) 15.88 (.625) 300 (11.81) 6.35 (.250) NOM. * Position and limit sensing * Security system switch * Linear actuators * Door switch 3.43 (.135) 3.18x7.82 (.125x.308 LG.) SLOT 2 6.35 (.250) 28.57 (1.125) Sensor 15.88 (.625) 3.18x7.82 (.125x.308 LG.) SLOT 2 9.53 (.375) 14.28 (.562) 19.05 (.75) 6.35 (.250) 3.43 (.135) 6.35 (.250) Schematics Switch Type Black Black Black Blue White Black Black (c) 2017 Littelfuse Revised: 02/09/17 Specifications are subject to change without notice. 1 and 2 3 4 littelfuse.com Reed Sensors Flange Mounting Sensor > 59150 59150 Flange Mount Sensor + 57150 Actuator Electrical Ratings Normally Open Contact Type Switch Type Normally Open High Voltage Change Over Normally Closed 1 2 3 4 VA/Watt - max. 10 10 5 5 Vdc - max. Vac - max. Vdc - min. 200 140 250 300 265 400 175 120 200 175 120 200 Carry Adc - max. Aac - max. Adc - max. 0.5 0.35 1.2 0.4 0.30 1.4 0.25 0.18 1.5 0.25 0.18 1.5 Contact, Initial Insulation - max. - min. 0.2 1010 0.2 1010 0.2 109 0.2 109 Capacitance Contact pF - typ. 0.3 0.2 0.3 0.3 Temperature Operating C -40 to +105 -20 to +105 -40 to +105 -40 to +105 Contact Rating Voltage 4 Current 4 1 Switching 2 Breakdown Switching Resistance 5 3 2 Product Characteristics Operate Time 6 ms - max. 1.0 1.0 3.0 3.0 Release Time 6 ms - max. 1.0 1.0 3.0 3.0 11ms 12 sine G - max. 100 100 50 50 50-2000 Hz G - max. 30 30 30 30 Shock 7 Vibration 7 Notes: 1. Contact rating - Product of the switching voltage and current should never exceed the wattage rating. Contact Littelfuse for additional load/life information. 2. When switching inductive and/or capacitive loads, the effects of transient voltages and/or currents should be considered. Refer to Application Notes AN108A and AN107 for details. 3. Breakdown Voltage - per MIL-STD-202, Method 301. 4. Electrical Load Life Expectancy - Contact Littelfuse with voltage, current values along with type of load. 5. This resistance value is for 11.81mm wire length. Resistance changes when wire lengthens. 6. Operate (including bounce)/Release Time - per EIA/NARM RS-421-A, diode suppressed coil (Coil II). 7. Shock and Vibration - per EIA/NARM RS-421-A and MIL-STD-202. 8. For custom modifications to the wire length or size, or adding a special connector, please contact Littelfuse. Sensitivity Options (Using 57150 Actuator) Select Option Switch Type S T U Pull-In AT Range Activate Distance - D mm (inch) Average Pull-In AT Range Activate Distance - D mm (inch) Average Pull-In AT Range Activate Distance - D mm (inch) Average V Pull-In Activate Distance - D AT mm (inch) Range Average 1 Normally Open 12-18 13.5 (.531) 17-23 11.2 (.441) 22-28 9.8 (.385) 27-33 9.0 (.357) 2 High Voltage -- -- 17-23 11.2 (.441) 22-28 9.8 (.385) 27-33 9.0 (.357) 3 Change Over 15-20 11.0 (.433) 20-25 9.2 (.362) 25-30 8.5 (.335) -- -- 4 Normally Closed 15-20 11.0 (.433) 20-25 9.2 (.362) 25-30 8.5 (.335) -- -- Note: D 1. Pull-In AT Range: These AT values are the bare reed switch AT before modification. (c) 2017 Littelfuse Revised: 02/09/17 Specifications are subject to change without notice. Sensor Actuator 2. The activation distance is average value on the final sensor assembly. littelfuse.com Reed Sensors Flange Mounting Sensor > 59150 59150 Flange Mount Sensor + 57150 Actuator Part Numbering System Cable Length Specification Sensor: Cable Type: 24 AWG 7/32 PVC 105C UL1430/UL1569 Select Option Cable Length mm (inch) 02 300 (11.81) 59150 - X - X - XX - X Series Termination Specification Switch Type 1, 2, 3, or 4 Termination Options Select Option Sensitivity S, T, U, or V Description (Two-wire versions illustrated) A Tinned leads (6.40.76)mm F Untinned leads (6.40.76)mm E JST type XHP 2.5mm pitch Cable Length 02 Termination A, E, or F Actuator: 57150 - 000 Series Standard Actuator 000 Note: The 57150 Actuator is sold separately. Packaging Packaging Option Packaging Specification Bulk (c) 2017 Littelfuse Revised: 02/09/17 Specifications are subject to change without notice. Bulk Quantity 500 Quantity & Packaging Code N/A Taping Width N/A littelfuse.com