SI5311-H / SI5311-H(B) IRED Features Colorless transparency lens type 5mm(T-1) all plastic mold type Low power consumption High radiant intensity RoHS Compliant Applications Light source for remote control devices (This device should be only used at non- repetitive pulse mode) Outline Dimensions unit : STRAIGHT TYPE STOPPER TYPE : (B) 4.80~5.20 4.80~5.20 8.40~8.80 1.00 Max. 0.05 Typ. 8.40~8.80 1.00 Max 0.05 Typ. 1.20 Min. 2.54 Typ. 26.00 Min. 2.54 Typ. 1 2 SPEC No : KSD-O2O029-002 APPROVED : I.H.KIM 5.50~6.00 0.55 Max. 0.55 Max. 0.06 Max 1.50 Min. 26.00 Min. 1.27 Typ. 1.50 Min. 0.50 Max. Rev No : 003 CHECKED : S.M.LEE 1 2 5.60~6.00 PIN Connections 1. Anode 2. Cathode Date : APR/04/2012 DRAWN : K.LIM Page : 1 /4 mm SI5311-H / SI5311-H(B) Absolute Maximum Ratings Characteristic (Ta=25) Symbol Rating Unit PD 120 mW IFP 0.5 A Reverse voltage VR 4 V Operating temperature range Topr -2585 Storage temperature range Tstg -30100 Tsol 260 for 5 seconds Power dissipation 1 * Peak forward current 2 * Soldering temperature *1.Duty ratio = 1/100, Pulse width = 0.1ms (Only used at non- repetitive pulse mode ) *2.Keep the distance more than 2.0mm from PCB to the bottom of IRED package Electrical / Optical Characteristics Characteristic (Ta=25) Symbol Test Condition Min. Typ. Max. Unit Forward voltage VF IF= 50mA - 1.3 1.45 V Radiant intensity IE IF= 50mA 25 50 - mW/Sr Peak wavelength P IR IF= 50mA - 950 - nm IF= 50mA - 50 - nm VR=4V - - 10 uA /2 IF= 50mA - 11 - deg Spectrum bandwidth Reverse current 3 * Half angle 1 *3. 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity SPEC No : KSD-O2O029-002 APPROVED : I.H.KIM Rev No : 003 CHECKED : S.M.LEE Date : APR/04/2012 DRAWN : K.LIM Page : 2 /4 SI5311-H / SI5311-H(B) Characteristic Diagrams Fig. 2 IE - IF Forward Current IF [mA] Radiant Intensity IE [mW/Sr] Fig. 1 IF-VF Forward Forward Voltage VF [V] Fig. 3 IF - Ta Current IF [mA] Forward Current IF [mA] Relative Intensity [%] Fig.4 Spectrum Distribution Ambient Temperature Ta [] Wavelength [nm] Fig. 5 Radiation Diagram 100 SPEC No : KSD-O2O029-002 APPROVED : I.H.KIM 50 0 50 Relative Radiant Intensity IE [%] Rev No : 003 CHECKED : S.M.LEE 100 Date : APR/04/2012 DRAWN : K.LIM Page : 3 /4 SI5311-H / SI5311-H(B) The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. SPEC No : KSD-O2O029-002 APPROVED : I.H.KIM Rev No : 003 CHECKED : S.M.LEE Date : APR/04/2012 DRAWN : K.LIM Page : 4 /4