Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. 74LVTH125 Low Voltage Quad Buffer with 3-STATE Outputs Features General Description Input and output interface capability to systems at The LVTH125 contains four independent non-inverting buffers with 3-STATE outputs. 5V VCC Bushold data inputs eliminate the need for external pull-up resistors to hold unused inputs Live insertion/extraction permitted Power Up/Down high impedance provides glitch-free bus loading Outputs source/sink -32mA/+64mA Functionally compatible with the 74 series 125 Latch-up performance exceeds 500mA ESD performance: - Human-body model > 2000V - Machine model > 200V - Charged-device model > 1000V These buffers are designed for low-voltage (3.3V) VCC applications, but with the capability to provide a TTL interface to a 5V environment. The LVTH125 is fabricated with an advanced BiCMOS technology to achieve high speed operation similar to 5V ABT while maintaining a low power dissipation. Ordering Information Order Number 74LVTH125M 74LVTH125SJ 74LVTH125MTC Package Number Package Description M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Device also available in Tape and Reel. Specify by appending suffix letter "X" to the ordering number. All packages are lead free per JEDEC: J-STD-020B standard. (c)1998 Fairchild Semiconductor Corporation 74LVTH125 Rev. 1.4.0 www.fairchildsemi.com 74LVTH125 -- Low Voltage Quad Buffer with 3-STATE Outputs January 2008 74LVTH125 -- Low Voltage Quad Buffer with 3-STATE Outputs Connection Diagram Logic Symbol IEEE/IEC Pin Description Pin Names Truth Table Description An, Bn Inputs On 3-STATE Outputs Inputs Output An Bn On L L L L H H H X Z H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial Z = HIGH Impedance (c)1998 Fairchild Semiconductor Corporation 74LVTH125 Rev. 1.4.0 www.fairchildsemi.com 2 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC Parameter Rating Supply Voltage -0.5V to +4.6V VI DC Input Voltage -0.5V to +7.0V VO DC Output Voltage Output in 3-STATE -0.5V to +7.0V State(1) Output in HIGH or LOW -0.5V to +7.0V DC Input Diode Current, VI < GND -50mA IOK DC Output Diode Current, VO < GND -50mA IO DC Output Current, VO > VCC IIK Output at HIGH State 64mA Output at LOW State 128mA ICC DC Supply Current per Supply Pin 64mA IGND DC Ground Current per Ground Pin 128mA TSTG Storage Temperature -65C to +150C Note: 1. IO Absolute Maximum Rating must be observed. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol VCC VI Parameter Min Max Units Supply Voltage 2.7 3.6 V Input Voltage 0 5.5 V IOH HIGH-Level Output Current -32 mA IOL LOW-Level Output Current 64 mA TA Free-Air Operating Temperature -40 85 C 0 10 ns/V t / V Input Edge Rate, VIN = 0.8V-2.0V, VCC = 3.0V (c)1998 Fairchild Semiconductor Corporation 74LVTH125 Rev. 1.4.0 www.fairchildsemi.com 3 74LVTH125 -- Low Voltage Quad Buffer with 3-STATE Outputs Absolute Maximum Ratings TA = -40C to +85C Min. Symbol Parameter VCC (V) 2.7 Input Clamp Diode Voltage Input HIGH Voltage VIL Input LOW Voltage 2.7-3.6 VO 0.1V or VO VCC - 0.1V VOH Output HIGH Voltage 2.7-3.6 IOH = -100A -1.2 2.0 0.8 VCC - 0.2 3.0 IOH = -32mA 2.0 2.7 IOL = 100A 0.2 IOL = 24mA 0.5 IOL = 16mA 0.4 IOL = 32mA 0.5 IOL = 64mA II(HOLD) II(OD) II 3.0 VI = 0.8V Bushold Input Over-Drive Current to Change State 3.0 VI = (3) Input Current 3.6 Bushold Input Minimum Drive 2.0V (4) IPU/PD A -75 500 A -500 VI = 5.5V 10 Control Pins 3.6 VI = 0V or VCC 1 Data Pins 3.6 VI = 0V -5 Power Off Leakage Current Power up/down 3-STATE Output Current 0 0-1.5 V 0.55 75 VI = VCC IOFF V V 2.4 3.0 V V IOH = -8mA 2.7 Output LOW Voltage Units II = -18mA VIK VOL Max. Conditions VIH 2.7-3.6 Typ.(2) A 1 0V VI or VO 5.5V 100 A VO = 0.5V to 3.0V, VI = GND or VCC 100 A IOZL 3-STATE Output Leakage Current 3.6 VO = 0.5V -5 A IOZH 3-STATE Output Leakage Current 3.6 VO = 3.0V 5 A IOZH+ 3-STATE Output Leakage Current 3.6 VCC < VO 5.5V 10 A ICCH Power Supply Current 3.6 Outputs HIGH 0.19 mA ICCL Power Supply Current 3.6 Outputs LOW 5 mA ICCZ Power Supply Current 3.6 Outputs Disabled 0.19 mA ICCZ+ Power Supply Current 3.6 VCC VO 5.5V, Outputs Disabled 0.19 mA ICC Increase in Power Supply Current(5) 3.6 One Input at VCC - 0.6V, Other Inputs at VCC or GND 0.2 mA Notes: 2. All typical values are at VCC = 3.3V, TA = 25C. 3. An external driver must source at least the specified current to switch from LOW-to-HIGH. 4. An external driver must sink at least the specified current to switch from HIGH-to-LOW. 5. This is the increase in supply current for each input that is at the specified voltage level rather than VCC or GND. (c)1998 Fairchild Semiconductor Corporation 74LVTH125 Rev. 1.4.0 www.fairchildsemi.com 4 74LVTH125 -- Low Voltage Quad Buffer with 3-STATE Outputs DC Electrical Characteristics TA = 25C Conditions Symbol Parameter VCC (V) CL = 50 pF, RL = 500 VOLP Quiet Output Maximum Dynamic VOL 3.3 (7) VOLV Quiet Output Minimum Dynamic VOL 3.3 (7) Min. Typ. Max. Units 0.8 V -0.8 V Notes: 6. Characterized in SOIC package. Guaranteed parameter, but not tested. 7. Max number of outputs defined as (n). n-1 data inputs are driven 0V to 3V. Output under test held LOW. AC Electrical Characteristics TA = -40C to +85C, CL = 50pF, RL = 500 VCC = 3.3V 0.3V Symbol tPLH Parameter Min. Propagation Delay, Data to Output tPHL tPZH Output Enable Time tPZL tPHZ Output Disable Time tPLZ tOSHL, tOSLH Typ.(8) Max. VCC = 2.7V Min. Max. Units ns 1.0 3.5 1.0 4.5 1.0 3.9 1.0 4.9 1.0 4.0 1.0 5.5 1.1 4.0 1.1 5.4 1.5 4.5 1.5 5.7 1.3 4.5 1.3 4.0 Output to Output Skew(9) 1.0 ns ns 1.0 ns Notes: 8. All typical values are at VCC = 3.3V, TA = 25C. 9. Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH-to-LOW (tOSHL) or LOW-to-HIGH (tOSLH). Capacitance(10) Symbol CIN COUT Parameter Conditions Typical Units Input Capacitance VCC = 0V, VI = 0V or VCC 4 pF Output Capacitance VCC = 3.0V, VO = 0V or VCC 8 pF Note: 10. Capacitance is measured at frequency f = 1MHz, per MIL-STD-883B, Method 3012. (c)1998 Fairchild Semiconductor Corporation 74LVTH125 Rev. 1.4.0 www.fairchildsemi.com 5 74LVTH125 -- Low Voltage Quad Buffer with 3-STATE Outputs Dynamic Switching Characteristics(6) 0.65 A 0.43TYP 14 8 B 6.4 6.10 3.2 1 PIN#1 IDENT 0.2 C B A 7 TOP VIEW 1.65 ALL LEAD TIPS 0.45 RECOMMENDED LAND PATTERN 1.2 MAX 0.30 0.19 ALL LEAD TIPS 0.1 C 0.65 SEE DETAIL A 0.90+0.15 -0.10 0.13 A B 0.20 0.09 C C FRONT VIEW 0.09 MIN NOTES: A. CONFORMS TO JEDEC REGISTRATION MO-153, VARIATION AB, REF NOTE 6 B. DIMENSIONS ARE IN MILLIMETERS. C. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH, AND TIE BAR EXTRUSIONS D. DIMENSIONING AND TOLERANCES PER ANSI Y14.5M, 2009. E. LANDPATTERN STANDARD: SOP65P640X110-14M. F. DRAWING FILE NAME: MKT-MTC14rev7. GAGE PLANE 0.09 MIN 1.00 0.25 SEATING PLANE DETAIL A 8.75 8.50 A 7.62 14 8 14 B 0.65 8 4.00 3.80 6.00 1 PIN #1 IDENT. 1.27 (0.33) TOP VIEW 5.60 7 0.51 0.35 0.25 M C B A 1.75 MAX 1.70 1 1.27 LAND PATTERN RECOMMENDATION A C 1.50 1.25 FRONT VIEW 0.25 0.10 0.50 0.25 x 45 R0.10 GAGE PLANE R0.10 0.36 8 0 0.90 0.50 (1.04) 0.10 C 0.25 0.19 SIDE VIEW NOTES: A. CONFORMS TO JEDEC MS-012, VARIATION AB, ISSUE C B. ALL DIMENSIONS ARE IN MILLIMETERS C. DIMENSIONS DO NOT INCLUDE MOLD FLASH OR BURRS D. LAND PATTERN STANDARD: SOIC127P600X145-14M E. CONFORMS TO ASME Y14.5M, 2009 D. DRAWING FILENAME: MKT-M14Arev14 SEATING PLANE DETAIL A SCALE 16 : 1 7 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com