15,4 Date Code 13,45 -0,1 Firmensignet 3 -0,1 Ident-Nr. XXXXXXX ERNI 103398 EE-Zone fur durchkontaktierte 0,5 Locher o0.60.05 compliant zone for thru hole o0.60.05 5 Ausrichtstreifen Alignment strip 2 10 x 2 = 20 8 25 10 x 2 = 15 2 4x2= 20 11 Ebene - z a 11.2 Level 3 Ebene - 1 9.7 Level 2 8.2 Ebene - Level 1 b c 8 +0.2 +0.2 +0.2 4.5 0.3 d e 3.7 0.3 f A 1 max 1 max P2 B C 50 max D E P1 F G U 1 Datum plane depth 11 10 9 25 24 23 22 21 20 19 18 17 16 15 7 8 6 5 4 3 1 2 K R3 z R R R R R R R R R R R R R R R R R R R R R R R R R J R R R R R R R R R R R R R R R R R R R R Bezugsebene Tiefe 13 0.3 contact layout Bestuckungsplan - R R R R R H R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R L M a N b R2 c P Q d R e R1 f S T 13 0.2 Lochbild fur Leiterplatte Board hole pattern (Bestuckungsseite) (Component mounting side) 4 10 x 2 = ( 20 ) 0.1 alle Locher 4 2 +0,05 1) 13 1 11 z 8.3 0.1 o 0,6 0,05 Diameter of finished plated-through hole o 0,7 0,02 Bohrungsdurchmesser des Loches o 0,7 0,02 Diameter of drilled hole a b 2 c Schichtaufbau im metallisierten Loch siehe Zeichnung 114406 d Metal plating of plated-through hole see drawing 114406 e f Fehlende Masse und Angaben nach IEC 61076-4-101 Missing information and dimensions per IEC 61076-4-101 Information: R1 Level 1 siehe Bestuckungsplan/ see contact layout Anforderungsstufe 2/ Consider protection memo from DIN 34 4 x 2 = (8) 16 0.2 0.1 o 0,6 0,05 Durchmesser des metallisierten Loches not plated thru 15 6.8 2 nicht durchkontaktiert 25 14.5 0.2 10 x 2 = ( 20 ) 1) all holes 5.3 0.1 Tolerances c Index All Dimensions in mm class 2 All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. 17.09.2002 Date 2:1 Scale Subject to modification without prior notice. Drawing will not be updated. Designation ERmet Messerleiste A ERmet Male Wide Type A Elektroapparate GmbH D-73099 ADELBERG V:00026194.SZN 103398 ERMA I