182120 REMARK:1. NO.3 MUST WITHSTAND A 6 Lbs. MIN. PUSHOUT FORCE FROM NO.2 AFTER STAKING OPERATION REVISIONS REV DRAWING NO. DESCRIPTION NC THIRD ANGLE PROJ. A 2. REMARK 1 IS MAINTAINED BY STAMPING THE SIX POINTS SHOWN ON THE DRAWING WITHOUT PUNCTURING NO.2 B C DATE INITIAL RELEASE 17-Feb-98 SEPERATE BODY AND SHELL 24-Mar-09 UPDATE DRAWING FORMAT 05-Jan-06 UPDATED PER THE LATEST SUPPLIER PRINT 26-Dec-11 ECO -- APPR -- -- 2267 RV 26 16.5 14 RECOMMENDED CABLE STRIPPING DIMENSIONS NOTES: FINISH (PLATING THICKNESS IN MICRO-INCHES) 1.BRASS 2.SILVER PL. 80 MIN. THICK OVER COPPER PL. 50 MIN. THICK 3.SILVER PL. 100 MIN. THICK OVER COPPER PL. 50 MIN. THICK 4.TEFLON 5.ZINC DIECAST 4 CONTACT PIN 2 BODY ZINC DIECAST DESCRIPTION MATERIAL 3 1 INSULATOR SHELL BRASS SILVER 1 SILVER 1 FINISH QTY TEFLON NATURAL BRASS SILVER 1 1 UNLESS OTHERWISE SPECIFIED, DIMENSIO NS ARE IN INCHES AND TOLERANCES ARE: 2 PLACE DECIMAL 3 PLACE DECIMAL ANGLES #.015 (0,381 mm) #.005 (0,127 mm) # 1$ NOTICE - These drawings, specificati property of Amphenol Corp. (2) must confidential and not to be disclosed are given by Amphenol Corp. The fur other data by Amphenol Corp., or to not to be regarded by implication or rights or permitting such holder or product, process or design, patented or disclosed by said drawings, speci ons, or other data (1) are, and rema be returned upon request; and (3) ar to any person other than those to w nishing of these drawings, specifica any other person to anyone for any p otherwise in any manner licensing, any other person to manufacture, use or otherwise, that may in any way b fications, or other data. in the e hom they tions, or urpose is granting or sell any e related to MATERIAL SEE TABLE REFERENCE TASK # 830 DRAWN DATE RAJAVIJAYAN S 26-Dec-11 ENGINEER DATE RAJAVIJAYAN S 26-Dec-11 APPROVED DATE TITLE UHF SOLDER PLUG (FOR RG-8/U, RG-312/U CABLE) Amphenol Connex SCALE: 2.0:1 CAD FILE DWG SIZE DRAWING NO. B 182120 SHEET 1 OF 1 REV C