114 EE-SV3 Series Photomicrosensor (Transmissive)
Photomicrosensor (Transmissive)
EE-SV3 Series
■Dimensions
Note: All units are in millimeters unless otherwise indicated.
■Features
•High-resolution model with a 0.2-mm-wide or 0.5-mm-wide sensing
aperture, high-sensitivity model with a 1-mm-wide sensing aper-
ture, and model with a horizontal sensing aperture are available.
•Solder terminal models:
EE-SV3/-SV3-CS/-SV3-DS/-SV3-GS
•PCB terminal models
EE-SV3-B/-SV3-C/-SV3-D/-SV3-G
■Absolute Maximum Ratings (Ta = 25°C)
Note: 1. Refer to the temperature rating chart if the ambient temper-
ature exceeds 25°C.
2. The pulse width is 10 μs maximum with a frequency of
100 Hz.
3. Complete soldering within 10 seconds.
■Electrical and Optical Characteristics (Ta = 25°C)
Internal Circuit
K
A
C
E
Terminal No. Name
A Anode
K Cathode
C Collector
E Emitter
Dimensions Tolerance
3 mm max. ±0.2
3 < mm ≤ 6 ±0.24
6 < mm ≤ 10 ±0.29
10 < mm ≤ 18 ±0.35
18 < mm ≤ 30 ±0.42
Model Aperture (a x b)
EE-SV3(-B) 2.1 x 0.5
EE-SV3-C(S) 2.1 x 1.0
EE-SV3-D(S) 2.1 x 0.2
EE-SV3-G(S) 0.5 x 2.1
Four, 1.5
Four, 0.5
Four, R1
Four,
R1
Four, 0.25
Center mark
Cross section AA Cross section AA
2.54±0.2
2.54±0.2
Unless otherwise specified, the
tolerances are as shown below.
Two,
3.2±0.2 dia.
holes
Two,
3.2±0.2 dia.
holes
Item Symbol Rated value
Emitter Forward current IF50 mA
(see note 1)
Pulse forward
current
IFP 1 A
(see note 2)
Reverse voltage VR4 V
Detector Collector–Emit-
ter voltage
VCEO 30 V
Emitter–Collec-
tor voltage
VECO ---
Collector current IC20 mA
Collector dissipa-
tion
PC100 mW
(see note 1)
Ambient tem-
perature
Operating Topr –25°C to
85°C
Storage Tstg –30°C to
100°C
Soldering temperature Tsol 260°C
(see note 3)
Item Symbol Value Condition
EE-SV3(-B) EE-SV3-C(S) EE-SV3-D(S) EE-SV3-G(S)
Emitter Forward voltage VF1.2 V typ., 1.5 V max. IF = 30 mA
Reverse current IR0.01 μA typ., 10 μA max. VR = 4 V
Peak emission wave-
length
λP940 nm typ. IF = 20 mA
Detector Light current IL0.5 to 14 mA 1 to 28 mA 0.1 mA min. 0.5 to 14 mA IF = 20 mA,
VCE = 10 V
Dark current ID2 nA typ., 200 nA max. VCE = 10 V,
0lx
Leakage current ILEAK --- ---
Collector–Emitter satu-
rated voltage
VCE (sat) 0.1 V typ., 0.4 V max. --- 0.1 V typ.,
0.4 V max.
IF = 20 mA,
IL= 0.1 mA
Peak spectral sensitivity
wavelength
λP850 nm typ. VCE = 10 V
Rising time tr 4 μs typ. VCC = 5 V,
RL = 100 Ω,
IL= 5 mA
Falling time tf 4 μs typ.
Be sure to read Precautions on page 25.