Replaceable ESD Carbofib tip tweezers 2ACFR.SA L=130 mm 242CFR.SA L=130 mm 249CFR.SA L=130 mm 259CFR.SA L=130 mm 5CFR.SA L=130 mm 5XCFR.SA L=125 mm 7CFR.SA L=125 mm 2ABCFR L=125 mm High precision Replaceable plastic tip tweezers Replacement tip set (2 tips + 3 screws available) The handle is made of high-quality antimagnetic stainless steel (SA, AISI 316L) Typical applications include the handling of scratch and break sensitive components like thin film resistors, SMD parts, microchips, etc. Well suited for soldering operations also at lead-free temperatures. The tips are made of ESD safe Carbofib (CF) PA66/CF30 polyamide 66 reinforced with 30 wt% carbon fibre very high rigidity, excellent tensile and flexural strength, fatigue and creep resistance excellent wear and abrasion resistance good heat capability good chemical resistance (oils, grease, fuels, non-polar solvents); not resistant to strong acids, alkalis and hot water or steam ESD safe material, (avoid powder attraction, sparks generation, ignition sources). very low coefficient of linear thermal expansion Type 2ACFR.SA A2ACF 242CFR.SA A242CF 249CFR.SA A249CF 259CFR.SA A259CF 5CFR.SA A5CF 5XCFR.SA A5CF 7CFR.SA A7CF 2ABCFR.SA A2ABCF Farnell Order-Nr. Description Flat round tip Replacement tip set for 2ACPR.SA Thin, flat round tip Replacement tip set for 242CPR.SA Strong rounded tip Replacement tip set for 249CPR.SA Fine tip Replacement tip set for 259CPR.SA Very fine tip Replacement tip set for 5CPR.SA Very fine tip, self-closing tweezers Replacement tip set for 5XCPR.SA Very fine, curved tip Replacement tip set for 7CPR.SA Flat curved round tip Replacement tip set for 2ABCFR.SA