EAO - Your Expert Partner for Human Machine Interfaces EAO Product Information Series 31 Switches and Indicators 31 Contents 31 Description ...................................................................................................... 3 Product Assembly .......................................................................................... 4 Devices raised mounting ............................................................................... 5 Accessories..................................................................................................... 7 Technical Data............................................................................................... 12 Typical Applications ..................................................................................... 15 Application guidelines.................................................................................. 17 Marking .......................................................................................................... 18 Drawings........................................................................................................ 19 Index............................................................................................................... 27 2 06.2009 31 Product Assembly Indicator round, raised mounting 0 1 1 2 3 4 5 Lens LED Switch housing Front plate Fixing nut 2 3 4 5 Illuminated pushbutton rectangular, raised mounting 0 1 2 3 4 5 4 06.2009 1 2 3 4 5 Lens LED Switch housing Front plate Fixing nut 31 Description Specimen order Product Information General notes The series 31 illuminated pushbuttons are equipped with snap-action or low-level switching elements. Besides the standard contacts (gold-plated silver) silver contacts for switching elements 2.8 mm plug-in terminals can be supplied on request. The front dimensions of these units are 18 x 24 mm, 18 x 18 mm or 18 mm dia. In addition to a number of illuminated pushbuttons, the customer can choose from a range of other units and accessories having the same front and mounting dimensions: Indicators, Flashers, Buzzers, etc. (For keylock switches see series 51 or 61.) 0 Indicator : - Indicator actuator, 18 x 24 mm, soldering terminal 31-040.005 Essential accessories : - Lens plastic blue, transparent, flush, 18 x 24 mm 31-903.6 - Single-LED, T1 3/4 MG, 24 VAC/DC, blau 10-2J12.1066 We reserve the right to modify technical data All dimensions in mm Mounting All switch actuators are mounted from the front by pushing them through the mounting hole in the front panel. They are then fixed from the back with a fixing nut and the mounting tool Typ-Nr. 01-907. Max. tightening torque 50 Ncm. For switching elements with 2.8 mm plug-in terminals, we offer plug-in bases, which when soldered to a PCB enable a plug-in connection to the button. The rectangular actuators are provided with an anti-twisting device. Lenses The flat or concave lenses, made of Polymethyl Methacrylate, are available in various colours, as well as translucent or transparent. Marking For further information about engraving, hot stamping and film inserts see part Marking. Illumination The T1 3/4 Midget Groove incandescent (filament) lamp (6 ... 48 V) ensures perfect illumination of the lenses, which are supplied in various colours. T1 3/4 Midget Groove Single-LED (6, 12, 24, 28, 48 V) are also available in blue, green, red, white or yellow. Luminosity and wave length scattering caused by the technology used in the LED manufacturing processes may lead to visual differences in our products. For supply voltages above 48 V, it is necessary to use a voltage reduction element (external series resistor or transformer). Position indication The status of a maintained action switch can be determinded by the position of the lens. 3 06.2009 31 Devices raised mounting Indicator actuator Essential Accessories: d Lens plastic page 7 d Single-LED page 10 4 4 31-030.005 31-030.002 31-031.006 4 Circuit drawing O 18 mm Typ-Nr. Technical drawing UT UT S S1 UT a 18 x 24 mm Typ-Nr. 31-701.006 31-702.006 31-040.005 31-040.002 31-041.006 Mounting dimensions 1D 2D - b 18 x 18 mm Typ-Nr. 31-703.006 31-704.006 31-050.005 31-050.002 31-051.006 Component layout IP 40 Terminals Diode (1N 4007) Indicator actuator Front protection Continuation see next page e 1 1 1 1 1 7 7 7 7 7 33 34 4 3 3 0.006 0.006 0.004 0.004 0.005 Diode (1N 4007): D = Diode, - = without Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm) Component layout from page 19, Mounting dimensions from page 20, Technical drawing from page 20, Circuit drawing from page 22 Buzzer IP 40 Plastic black S 31-810.005 Circuit drawing S1 a 18 x 24 mm Typ-Nr. 31-801.002 Technical drawing IP 40 Front cap Plastic black Mounting dimensions Buzzer Operation voltage : 10 ... 26 VDC Operation voltage : 10 ... 55 VAC, 10 ... 75 VDC Terminals Front protection Continuation see next page e 1 3 1 0.015 1 3 2 0.015 Further information in the Technical Data and Typical Applications Terminals: S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm), S = Soldering terminal Mounting dimensions from page 20, Technical drawing from page 20, Circuit drawing from page 22 5 06.2009 31 Devices raised mounting Illuminated pushbutton actuator Essential Accessories: d Lens plastic page 7 d Single-LED page 10 - 2 NC - 2 NO - 1 NC + 1 NO 1D 2D - M 2 NC + 2 NO 1D 2D - 3 NC + 3 NO - 4 NC + 4 NO - MA M MA M MA M MA M MA M 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 Circuit drawing 1 NO O 18 mm Typ-Nr. 31-476.036 31-436.036 31-473.036 31-433.036 31-475.036 31-435.036 31-472.036 31-432.036 31-471.036 31-431.036 31-747.0292 31-743.0292 31-748.0292 31-744.0292 31-271.0252 31-271.022 31-131.0252 31-131.022 31-749.0292 31-745.0292 31-750.0292 31-746.0292 31-272.0252 31-132.0252 31-273.0252 31-133.0252 31-274.0252 31-134.0252 Technical drawing - UT UT UT UT UT UT UT UT UT UT UT UT UT UT S S1 S S1 UT UT UT UT S S S S S S a 18 x 24 mm Typ-Nr. 31-466.036 31-426.036 31-463.036 31-423.036 31-465.036 31-425.036 31-462.036 31-422.036 31-461.036 31-421.036 31-713.0292 31-705.0292 31-714.0292 31-706.0292 31-261.0252 31-261.022 31-121.0252 31-121.022 31-715.0292 31-707.0292 31-716.0292 31-708.0292 31-262.0252 31-122.0252 31-263.0252 31-123.0252 31-264.0252 31-124.0252 Component layout 1 NC + 1 NO MA M MA M MA M MA M MA M MA M MA M MA b 18 x 18 mm Typ-Nr. 31-486.036 31-456.036 31-483.036 31-453.036 31-485.036 31-455.036 31-482.036 31-452.036 31-481.036 31-451.036 31-717.0292 31-709.0292 31-718.0292 31-710.0292 31-281.0252 31-281.022 31-151.0252 31-151.022 31-719.0292 31-711.0292 31-720.0292 31-712.0292 31-282.0252 31-152.0252 31-283.0252 31-153.0252 31-284.0252 31-154.0252 Mounting dimensions SA - Terminals LL Contacts 1 NC Switching action IP 40 Diode (1N 4007) Switching system Illuminated pushbutton actuator Front protection Continuation see next page e 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 14 28 17 31 16 30 15 29 18 32 11 25 12 26 13 10 27 24 7 21 8 22 9 23 6 20 5 19 0.007 0.007 0.007 0.007 0.007 0.007 0.007 0.007 0.007 0.007 0.008 0.008 0.008 0.008 0.006 0.006 0.006 0.006 0.010 0.010 0.010 0.010 0.008 0.008 0.010 0.010 0.012 0.012 Power rating: Low level switching element 42 V, 100 mA; Snap action switching element 250 V, 5 A Switching system: LL = Low level switching element, SA = Snap-action switching element Contacts: NC = Normally closed, NO = Normally open Diode (1N 4007): - = without, D = Diode Switching action: MA = Maintained action, M = Momentary action Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm) Component layout from page 19, Mounting dimensions from page 20, Technical drawing from page 20, Circuit drawing from page 22 6 06.2009 31 Accessories Front Lens plastic Continuation see next page Lens plastic concave, illuminative concave, non-illuminative flush, illuminative flush, illuminative (not recommended for film insert) flush, non-illuminative Lens blue transparent colourless transparent green transparent orange transparent red transparent yellow transparent black opaque grey opaque blue transparent colourless transparent green transparent orange transparent red transparent smoked transparent yellow transparent blue translucent colourless transparent green translucent green transparent orange translucent red translucent red transparent white translucent yellow translucent yellow transparent black opaque grey opaque b 18 x 18 mm Typ-Nr. 31-954.6 31-954.7 31-954.5 31-954.3 31-954.2 31-954.4 31-952.0 31-953.6 31-953.7 31-953.5 31-953.3 31-953.2 31-953.1 31-953.4 31-951.6 31-955.7 31-951.5 31-955.5 31-951.3 31-951.2 31-955.2 31-951.9 31-951.4 31-955.4 31-951.0 31-951.8 a 18 x 24 mm Typ-Nr. 31-904.6 31-904.7 31-904.5 31-904.3 31-904.2 31-904.4 31-902.0 31-902.8 31-903.6 31-903.7 31-903.5 31-903.3 31-903.2 31-903.1 31-903.4 31-901.6 31-905.7 31-901.5 31-905.5 31-901.3 31-901.2 31-905.2 31-901.9 31-901.4 31-905.4 31-901.0 31-901.8 O 18 mm Typ-Nr. e 31-933.6 31-933.7 31-933.5 31-933.3 31-933.2 31-933.1 31-933.4 31-931.6 31-935.7 31-931.5 31-935.5 31-931.3 31-931.2 31-935.2 31-931.9 31-931.4 31-935.4 31-931.0 31-931.8 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 Protective cover Protective cover hinged, transparent, with means for sealing b 18 x 18 mm Typ-Nr. 31-920 a 18 x 24 mm Typ-Nr. Technical drawing Continuation see next page e 31-925 5 6 0.002 0.002 Technical drawing from page 20 7 06.2009 31 Accessories Front protective cap front protection IP 67 Front protective cap two-part a 18 x 24 mm Typ-Nr. Technical drawing b 18 x 18 mm Typ-Nr. 31-923 Front protective cap PVC Silikon Mounting dimensions Continuation see next page e 31-924.2 2 2 4 4 0.003 0.003 Mounting dimensions from page 20, Technical drawing from page 20 Protective guard matt chromium-plated Typ-Nr. 01-927 Protective guard broad sides bent upwards narrow ends bent upwards 01-926 Technical drawing Continuation see next page e 2 0.011 1 0.011 Technical drawing from page 20 Blind plug Blind plug Plastic black Blind plug Mounting dimensions from page 20 8 06.2009 b 18 x 18 mm Typ-Nr. 01-948.0 a 18 x 24 mm Typ-Nr. 01-947.0 O 18 mm Typ-Nr. 01-949.0 Mounting dimensions Continuation see next page e 1 0.001 31 Accessories > Backside PCB plug-in base PCB plug-in base 16.4 mm dia. x 9.8 mm for Low level switching element, Pins axial 17.8 x 12.9 mm x 9.8 mm for Snap-action switching element 2.8 mm, Pins axial 17.9 x 17.9 x 8.4 mm for Low level switching element, Pins bent at right-angle P Typ-Nr. 31-940 P P 31-942 31-941 Component layout Terminals Continuation see next page e 2 0.002 3 1 0.002 0.004 PCB plug-in base Pins right-angle : With the extendable mounting the distance between plug-in base and PCB can be varied up to 3 mm. Terminals: P = PCB terminal Component layout from page 19 Flat receptacle Continuation see next page Flat receptacle 2.0 x 0.5 mm for Universal terminal 2.8 x 0.5 mm for Plug-in terminal e Typ-Nr. 31-945 0.001 31-946 0.001 Typ-Nr. 01-928 0.001 31-928 31-929 0.001 0.001 Typ-Nr. 01-929 0.010 Insulation sleeve Continuation see next page Insulation sleeve Cover Plug-in terminals for snap-action switching element 2.8 mm for Flat receptacle 31-945 for Flat receptacle 31-946 e Terminal cover Continuation see next page Terminal cover e 9 06.2009 31 Accessories > Illumination Filament lamp Continuation see next page Socket Filament lamp T1 3/4 MG Operating voltage/-current 12 VAC/DC, 75 mA 14 VAC/DC, 80 mA 18 VAC/DC, 40 mA 24 VAC/DC, 35 mA 28 VAC/DC, 30 mA 28 VAC/DC, 40 mA 36 VAC/DC, 20 mA 36 VAC/DC, 30 mA 48 VAC/DC, 20 mA 48 VAC/DC, 25 mA 6 VAC/DC, 120 mA 6.3 VAC/DC, 200 mA e Typ-Nr. 10-1309.1309 10-1310.1319 10-1311.1249 10-1312.1229 10-1313.1209 10-1313.1249 10-1316.1179 10-1316.1209 10-1319.1179 10-1319.1199 10-1306.1349 10-1307.1369 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 Typ-Nr. 10-2J09.1066 10-2J12.1066 10-2J13.1066 10-2J19.1046 10-2J06.3146 10-2J09.1065 10-2J12.1065 10-2J13.1065 10-2J19.1045 10-2J06.3145 10-2J09.1062 10-2J12.1062 10-2J13.1062 10-2J19.1042 10-2J06.3142 10-2J09.1069 10-2J12.1069 10-2J13.1069 10-2J19.1049 10-2J06.3149 10-2J09.1064 10-2J12.1064 10-2J13.1064 10-2J19.1044 10-2J06.3144 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 Single-LED Continuation see next page Socket Single-LED T1 3/4 MG Light colour blue green red white diffuse yellow Operating voltage/-current 12 VAC/DC, 7/14 mA 24 VAC/DC, 7/14 mA 28 VAC/DC, 7/14 mA 48 VAC/DC, 4/8 mA 6 VDC, 15 mA 12 VAC/DC, 4/7 mA 24 VAC/DC, 4/7 mA 28 VAC/DC, 4/7 mA 48 VAC/DC, 2/4 mA 6 VDC, 7 mA 12 VAC/DC, 7/14 mA 24 VAC/DC, 7/14 mA 28 VAC/DC, 7/14 mA 48 VAC/DC, 4/8 mA 6 VDC, 15 mA 12 VAC/DC, 7/14 mA 24 VAC/DC, 7/14 mA 28 VAC/DC, 7/14 mA 48 VAC/DC, 4/8 mA 6 VDC, 15 mA 12 VAC/DC, 7/14 mA 24 VAC/DC, 7/14 mA 28 VAC/DC, 7/14 mA 48 VAC/DC, 4/8 mA 6 VDC, 15 mA Note: AC operation through halve-wave rectifier possible, slight flickering can occure. 10 06.2009 e 31 Accessories Series resistor for lamp voltage reduction Continuation see next page Series resistor 10 k, for filament lamp 48 VAC, 25 mA 2.7 k, for filament lamp 48 VAC, 25 mA 3.3 k, for filament lamp 48 VAC, 25 mA 4.7 k, for filament lamp 48 VAC, 25 mA e Operating voltage 230/240 V Typ-Nr. 02-904.7 0.003 110 V 125 V 145 V 02-904.0 02-904.1 02-904.3 0.003 0.003 0.003 Typ-Nr. 02-912.2 0.045 02-912.3 02-912.1 0.090 0.025 Please keep to the country specific security rules. Terminal plate empty for fitting with series resistors Continuation see next page Terminal plate empty 10 spaces 125 x 60 x 15 mm 15 spaces 187.5 x 60 x 15 mm 5 spaces 62.5 x 60 x 15 mm e > Assembling Lens remover Continuation see next page Lens remover e Typ-Nr. 02-905 0.011 Typ-Nr. 61-9740.0 0.003 Typ-Nr. 01-907 0.020 Typ-Nr. 01-906 0.030 Lamp remover Continuation see next page Lamp remover e CAUTION A switching process might be released when replacing the lamp/LED ! Mounting tool Continuation see next page Mounting tool for Indicator 16 mm dia. e Dressing tool for aligning buttons Continuation see next page Dressing tool e 11 06.2009 31 Technical Data Conventional free air thermal current 5A The maximum current in continuous operation and at ambient temperature not exceeding the quoted maximum values. Actuator with snap-action switching element Switching system Self-cleaning, double-break, snap action switching system (with contact gap 2 x 0.5 mm). 1 Normally closed or 1 Normally open contact per element. Snap-action switching elements with soldering terminals at the sides: Up to 4 switching element can be on a pushbutton (max. 4 Normally closed and 4 Normally open contacts). Snap-action switching element with axial plug-in terminals 2.8 mm stachable, only 1 switching element can be on a pushbutton. Switch rating 250 VAC, 5 A (cos 1) 250 VAC, 3 A (cos 0,3) Switch rating AC (cos 0,7) 0 Voltage Current 125 VAC 3A 250 VAC 2A Switch rating DC (inductive) L:R = 30 ms Material 0 Material of contact Gold plated silver Switch housing Axial plug-in-/soldering terminal 2.8 mm: Diallylphthalate (DAP), Polyamide (PA66), Polysulfone, heatresistant and self-extinguishing Soldering terminal: PA 6.6 Ultramide Actuator housing Polyetherimide, self-extinguishing Mechanical characteristics Terminals Snap-action switching element with tinned soldering terminals at the sides: Max. wire diameter 2 wires a 1.2 mm Max. wire cross-section of stranded cable 1 x 1 mm Snap-action switching element with axial plug-in terminals, which can also be used as soldering terminals: Plug-in terminal 2.8 x 0.5 mm Soldering terminal: Max. wire diameter 1 wire of 1.5 mm Max. wire cross-section of stranded cable 2 x 0.75 mm or 1 x 1.0 mm Actuating force 2 N ... 5.5 N, depending on the number of switching elements Actuating travel 3 mm Rebound time 5ms Mechanical lifetime Momentary action 2 million cycles of operation Maintained action 1 million cycles of operation Voltage Current 24 VDC 2A 60 VDC 0.7 A Protection class II Environmental conditions Storage temperature -40 C ... +85 C Service temperature -25 C ... +55 C For indicators and illuminated pushbuttons mounted as a block, make sure the heat can escape freely. Protection degree Front as per: IP 40 IP 65 with spray cover Shock resistance (Single impacts, semi-sinusoidal) 15 g for 11 ms, as per IEC 60512-4-3, IEC 60068-2-27 Vibration resistance (sinusoidal) 10 g at 0-2000 Hz, amplitude 1.5 mm, as per IEC 60512-4-4, IEC 60068-2-6 Climate resistance Standard condition, as per IEC 60068-2-3 and 2-30 Changing condition, as per IEC 60068-2-14 and 2-33 Approvals Standards IEC 61058, EN 61058 Rated voltage 250 VAC/VDC Declaration of conformity CE Rated current 5A Contact resistance Starting value (initial) 50 m 12 06.2009 220 VDC 0.1 A Electric strength 2500 VAC, 50 Hz, 1 min. between all terminals and earth, as per IEC 60512-2-11 Approbations CB (IEC 61058) CSA ENEC (EN 61058) Germanischer Lloyd UL Electrical characteristics 110 VDC 0.2 A 31 Technical Data > Actuator with low level switching element Switching system This low level switching element was designed for switching low powers in electronic circuits. The mechanism assures reliable switching of loads ranging from a few A/V up to 100 mA/42 VAC/ DC. Single-break momentary contact, as normally open or normally closed with 4 independent points of contact. 2 momentary contacts per switching element; combination of normally open and normally closed is possible. Special features are the long life, extremely short rebound time and stable contact resistance. Material Material of contact Gold plated Switch housing Polysulfone, heat-resistant and self-extinguishing Actuator housing Polyetherimide, self-extinguishing Mechanical characteristics Terminals The universal terminals permit these units to be mounted on printed circuit boards (PCB). These terminals can also be used as soldering or plug-in terminals. For these terminals we can also supply a plug-in base which, when soldered on to the board, enables the switch to be plugged in. Soldering terminal: Max. wire diameter 2 wires a 0.8 mm Max. wire cross-section of stranded cable 1x 0.75 mm Protection class II Environmental conditions Storage temperature -40 C ... +85 C Service temperature -25 C ... +55 C For indicators and illuminated pushbuttons mounted as a block, make sure the heat can escape freely. Protection degree Front as per: IP 40 IP 65 with spray cover Shock resistance (Single impacts, semi-sinusoidal) 15 g for 11 ms, as per IEC 60512-4-3, IEC 60068-2-27 Vibration resistance (sinusoidal) 10 g at 0-2000 Hz, amplitude 1.5 mm, as per IEC 60512-4-4, IEC 60068-2-6 Climate resistance Standard condition, as per IEC 60068-2-3 and 2-30 Changing condition, as per IEC 60068-2-14 and 2-33 Plug-in terminal: 2.0 x 0.5 mm Actuating force 3 N ... 3,5 N Actuating travel 3 mm Rebound time Typ. <100 s Mechanical lifetime Momentary action 5 million cycles of operation Maintained action 1 million cycles of operation Electrical characteristics Standards EN 61058 Contact resistance Starting value (initial) 50 m Switch rating 10 A, 100 V to 100 mA at 42 VAC/VDC Electric strength 2500 VAC, 50 Hz, 1 min. between all terminals and earth, as per IEC 60512-2-11 13 06.2009 31 Technical Data > > Buzzer Typ-Nr. 31-810.005 Switching system Buzzer system Electronic non-contacting buzzer with IC oscillator Material Buzzer Typ-Nr. 31-801.002 Switching system Buzzer system Electronic non-contacting buzzer with IC oscillator Material Alarm buzzer case Polyetherimide Alarm buzzer case Polyetherimide Front bezel Polyamide Front bezel Polyamide Mechanical characteristics Terminals Soldering terminal Electrical characteristics Mechanical characteristics Terminals Plug-in terminal 2.8 x 0.5 mm Electrical characteristics Frequency (tone) Approx. 2.8 kHz Frequency (tone) ca. 2.0 kHz Interval frequency approx. 3 Hz Interval frequency 2 Hz Sound pressure 88 dB (A) 8 dB at a distance of 0.1 m Volume variable with a 1 M potentiometer or corresponding fixed resistor Sound pressure 88 db (A) 8 dB at a distance of 0.1 m Operation Voltage/Current Typ. 10 VAC ... 55 VAC, 25 mA Typ. 10 VDC ... 75 VDC, 15 mA Environmental conditions Operation Voltage/Current 10 VDC ... 26 VDC, 20 mA Environmental conditions Storage temperature -40 C ... +85 C Storage temperature -40 C ... +85 C Service temperature -25 C ... +55 C Service temperature -25 C ... +55 C Protection degree IP 40 Protection degree IP 40 Approvals Approbations Germanischer Lloyd Approvals Approbations Germanischer Lloyd Declaration of conformity CE 14 06.2009 Declaration of conformity CE 31 Typical Applications Diode element When indicators and illuminated pushbuttons equipped with diodes, the user is able to perform a lamp check or wire an alarm circuit simply with a considerable saving of space. 0 15 06.2009 31 Typical Applications > Buzzer (31-801.002) Depending on how terminals are connected, the buzzer can operate with a continous tone a(-) b(+) or with intermittent tone a(+) b(-). 0 a b + 10 - 26 VDC > Buzzer (31-810.005) 0 8 7 6 5 8 7 6 5 1 2 3 4 1. Supply voltage I Continuos tone U = 10 - 35 VAC U = 10 - 50 VDC 16 06.2009 8 7 6 5 0 U U 8 7 6 5 1 2 3 4 2. Supply voltage II Continous tone U = 35 - 55 VAC U = 35 - 75 VDC 1 2 3 4 3. Intermittent tone Interval aprox. 3 Hz 1 2 3 4 4. Volume control 31 Application guidelines Suppressor circuits When switching inductive loads such as relays, DC motors, and DC solenoids, it is always important to absorb surges (e.g. with a diode) to protect the contacts. When these inductive loads are switched off, a counter emf can severely damage switch contacts and greatly shorten lifetime. Fig. 1 shows an inductive load with a free-wheeling diode connected in parallel. This free-wheeling diode provides a path for the inductor current to flow when the current is interrupted by the switch. Without this free-wheeling diode, the voltage across the coil will be limited only by dielectric breakdown voltages of the circuit or parasitic elements of the coil. This voltage can be kilovolts in amplitude even when nominal circuit voltages are low (e.g. 12 VDC) see Fig. 2. The free-wheeling diode should be chosen so that the reverse breakdown voltage is greater than the voltage driving the inductive load. The DC blocking voltage (VR) of the free-wheeling diode can be found in the datasheet of a diode. The forward current should be equal or greater than the maximum current flowing through the load. To get an efficient protection, the free-wheeling diode must be connected as close as possible to the inductive load! 0 Counter emf over load without free-wheeling diode Fig. 2 Switching with inductive load Fig. 1 Switch ON OFF 0 VDC + _ Free-wheeling diode Inductive load Sveral hundred to several thousend volts e=L di __ dt 17 06.2009 31 Marking General notes 0 1. Engraving In addition to the most commonly used world languages, in DIN 1451-3 close spacing, other typefaces are available as Scandinavian, Slavic, Greek, Russian and Polish. Red, blue and black lenses are filled with white colour. Other colour lenses are filled in black. Standard height of letters is 2 mm. If the height is not specified, we will supply 2 mm engraved letters. 2. Hot stamping For larger series it is worth considering markings by means of hot stamping We will pleased to advise you. For letters and figures, typefaces with 2.5 mm, 3 mm and 4 mm are available. 3. Film inserts Instead of using engraving the lenses can be fitted with transparent film inserts, as an alternative. For this purpose, though, it is advisible to use transparent lenses. In the case of use of a smoke-black lens the fitted film becomes readable only if the lamp is on. To insert the film, the feet of the lens holder have to be pushed together far enough to enable the lens to be lift off easily. The film thickness is 0.2 mm. Important : Consider pushbutton mounting orientation befor specifying engraving characters ! All dimensions in mm 0 Front size (Lens) 18 dia. (15.8 dia.) Film insert max. size 12.8 dia. 18 x 18 (15.2 x 15.2) 12.7 x 12.7 18 x 24 (15.2 x 21.2) 12.7 x 18.7 Height of letters h 2.5 3.0 4.0 5.0 6.0 8.0 2.5 3.0 4.0 5.0 6.0 8.0 2.5 3.0 4.0 5.0 6.0 Number of lines 3 2 2 1 1 1 4 3 2 2 1 1 4 5 3 4 2 3 2 1 2 1 8.0 0 Number of (target value) capital letters per line 6 5 3 2 2 2 7-8 6-7 4-5 3-4 3 2-3 11 7-8 9 - 10 6-7 7 4-5 5-6 3-4 4-5 3 3-4 2-3 Number of (target value) small letters per line 6 6 4 3 2 2 8 7 5 4 3-4 2-3 12 8 10 - 11 7 7-8 5 6 4 5 3-4 3-4 2-3 B1 B2 B3 B4 AB abc AB abc AB AB abc 18 06.2009 h Film abc Image B4 B4 B4 B4 B4 B4 B3 B3 B3 B3 B3 B3 B1 B2 B1 B2 B1 B2 B1 B2 B1 B2 B1 B2 31 Drawings Component layout 1 PCB plug-in base page 9 Extendable mounting pins 3 1 4 2 a 9 4 3 b b 17.9 31 Switch a 42 9.6 17.9 1.27 O1.0 all holes 7.62 15.24 5 x 2.54 1.27 1.27 1.27 0.85 Drilling plan (conductor side) 2 PCB plug-in base page 9 3.81 3.81 O1.0 5.08 10.16 all holes O2.1 hole for central mounting with M2 screw, if desired 12.7 3 PCB plug-in base page 9 7.62 O2.1 hole for central mounting with M2 screw, if desired 10.16 3.81 7.62 3.81 + 0.1 O1.0 0 all holes 4 Indicator actuator page 5 | Illuminated pushbutton actuator page 6 Terminals (rearside) PCB layout (conductor side) 7.62 18 x 18 mm 18 x 24 mm 3.81 2.54 18 mm dia. 10.16 5.08 2 4 1 3 a b 2 4 1 3 a b 2 4 1 3 a b Anti twist device only 18 x 24 mm O1.0 all holes 19 06.2009 31 Drawings Mounting dimensions 1 Indicator actuator page 5 | Buzzer page 5 | Illuminated pushbutton actuator page 6 | Blind plug page 8 .2 +0 0 .2 +0 0 16 .2 +0 0 16 16 18 min. 24 min. 18 min. 10.4 2 Front protective cap page 8 18 x 24 mm 24 min. 24 min. 18 x 18 mm .2 +0 0 .2 +0 0 16 16 24 min. 30 min. Technical drawing 18 1 Protective guard page 8 26 12 18 2 Protective guard page 8 24 12 20 06.2009 O18 mm 18 min. 2 18 min. 18 x 24 mm 18 min. 18 x 18 mm 31 Drawings 2.8 x 0.5 3 Buzzer page 5 18 x 24 mm 1.5 ... 6 67 10.5 36 24 4 Front protective cap page 8 30 13 24 x 30 mm 24 x 24 mm 5 Protective cover page 7 32 25.5 23.5 10.5 10 14.5 20 6 Protective cover page 7 32 25.5 23.5 10.5 12 14.5 24 2.8 x 0.5 L1 10.5 3 U U+D Universal terminal + diodes O 18 mm Universal terminal 18 x 18 mm Soldering terminal (also pluggable) 18 x 24 mm 1.5 ... 6 Soldering terminal 7 Indicator actuator page 5 L L1 U U+D 23.5 26.5 36 1D, 2D 36 L 21 06.2009 31 Drawings Universal terminal + diode 18 x 18 mm Universal terminal 18 x 24 mm Soldering terminal (also pluggable) Soldering terminal 8 Illuminated pushbutton actuator page 6 L L1 U U+D 1NC+1NO 29 36 - - 2NC+2NO 36.5 - - - 3NC+3NO 44 - - - 4NC+4NO O 18 mm 2.8 x 0.5 1.5 ... 6 3 L1 10.5 U L Circuit drawing 1 Buzzer page 5 a b 2 Buzzer page 5 8 7 6 5 1 2 3 4 3 Indicator actuator page 5 a-(x1) b+(x2) 4 Indicator actuator page 5 5 Illuminated pushbutton actuator page 6 1 3 1 2 3 1 4 22 06.2009 2 3 1 4 2 3 x1- 4 x2+ IV III II I 4 2 U+D 51.5 - - - 1NC+1NO+D - - - 43.5 2NC+2NO+D - - - 51 36 - 1NC, 1NO, 1NC+1NO, 2NC, 2NO 31 Drawings 6 Illuminated pushbutton actuator page 6 1 3 1 I 2 3 1 II 2 4 3 x1- 4 x2+ III 2 4 7 Illuminated pushbutton actuator page 6 1 3 1 I 2 3 a- 3(+) 4 b+ 4(-) II 2 4 8 Illuminated pushbutton actuator page 6 1 1 3 2 3 a- 3(+) 1(-) 4 b+ 4(-) 2(+) II I 2 4 9 Illuminated pushbutton actuator page 6 1 1 3 2 3 x1- 4 x2+ II I 2 4 10 Illuminated pushbutton actuator page 6 1 3 a- 4 b+ I 2 11 Illuminated pushbutton actuator page 6 1 3 a- 3(+) 4 b+ 4(-) I 2 12 Illuminated pushbutton actuator page 6 1 3 a- 3(+) 1(-) 4 b+ 4(-) 2(+) I 2 13 Illuminated pushbutton actuator page 6 1 3 x1- 4 x2+ I 2 23 06.2009 31 Drawings 14 Illuminated pushbutton actuator page 6 1 a- 2 b+ 15 Illuminated pushbutton actuator page 6 1 3 a- 2 4 b+ 16 Illuminated pushbutton actuator page 6 1 a- 2 b+ 17 Illuminated pushbutton actuator page 6 1 3 a- 2 4 b+ 18 Illuminated pushbutton actuator page 6 1 3 a- 2 4 b+ 19 Illuminated pushbutton actuator page 6 1 3 1 2 1 3 4 2 3 1 2 4 4 2 20 Illuminated pushbutton actuator page 6 1 3 1 2 1 3 4 2 3 x1- 4 x2+ III II I 2 4 21 Illuminated pushbutton actuator page 6 1 3 1 2 3 a- 3(+) 4 b+ 4(-) II I 4 24 06.2009 2 3 x1- 4 x2+ IV III II I 31 Drawings 22 Illuminated pushbutton actuator page 6 1 3 1 I 2 3 a- 3(+) 1(-) 4 b+ 4(-) 2(+) II 2 4 23 Illuminated pushbutton actuator page 6 1 3 1 I 2 3 x1- 4 x2+ II 2 4 24 Illuminated pushbutton actuator page 6 1 3 x1- 4 x2+ I 2 25 Illuminated pushbutton actuator page 6 1 3 a- 3(+) 4 b+ 4(-) I 2 26 Illuminated pushbutton actuator page 6 1 3 a- 3(+) 1(-) 4 b+ 4(-) 2(+) I 2 27 Illuminated pushbutton actuator page 6 1 3 x1- 4 x2+ I 2 28 Illuminated pushbutton actuator page 6 1 a- 2 b+ 29 Illuminated pushbutton actuator page 6 1 3 a- 2 4 b+ 25 06.2009 Drawings 30 Illuminated pushbutton actuator page 6 1 a- 2 b+ 31 Illuminated pushbutton actuator page 6 1 3 a- 2 4 b+ 32 Illuminated pushbutton actuator page 6 1 3 a- 2 4 b+ 33 Indicator actuator page 5 a-(x1) 3(+) b+(x2) 4(-) 34 Indicator actuator page 5 a-(x1) 3(+) 1(-) b+(x2) 4(-) 2(+) 26 06.2009 31 Index from Typ-Nr. Typ-Nr. Page 01-906 ........................................ 11 01-907 ........................................ 11 01-926 .......................................... 8 01-927 .......................................... 8 01-928 .......................................... 9 01-929 .......................................... 9 01-947.0 ....................................... 8 01-948.0 ....................................... 8 01-949.0 ....................................... 8 02-904.0 ..................................... 11 02-904.1 ..................................... 11 02-904.3 ..................................... 11 02-904.7 ..................................... 11 02-905 ........................................ 11 02-912.1 ..................................... 11 02-912.2 ..................................... 11 02-912.3 ..................................... 11 10-1306.1349 ............................. 10 10-1307.1369 ............................. 10 10-1309.1309 ............................. 10 10-1310.1319 ............................. 10 10-1311.1249 ............................. 10 10-1312.1229 ............................. 10 10-1313.1209 ............................. 10 10-1313.1249 ............................. 10 10-1316.1179 ............................. 10 10-1316.1209 ............................. 10 10-1319.1179 ............................. 10 10-1319.1199 ............................. 10 10-2J06.3142 ............................. 10 10-2J06.3144 ............................. 10 10-2J06.3145 ............................. 10 10-2J06.3146 ............................. 10 10-2J06.3149 ............................. 10 10-2J09.1062 ............................. 10 10-2J09.1064 ............................. 10 10-2J09.1065 ............................. 10 10-2J09.1066 ............................. 10 10-2J09.1069 ............................. 10 10-2J12.1062 ............................. 10 10-2J12.1064 ............................. 10 10-2J12.1065 ............................. 10 10-2J12.1066 ............................. 10 10-2J12.1069 ............................. 10 10-2J13.1062 ............................. 10 10-2J13.1064 ............................. 10 10-2J13.1065 ............................. 10 10-2J13.1066 ............................. 10 10-2J13.1069 ............................. 10 10-2J19.1042 ............................. 10 10-2J19.1044 ............................. 10 10-2J19.1045 ............................. 10 10-2J19.1046 ............................. 10 10-2J19.1049 ............................. 10 31-030.002 ................................... 5 31-030.005 ................................... 5 31-031.006 ................................... 5 31-040.002 ................................... 5 31-040.005 ................................... 5 31-041.006 ................................... 5 31-050.002 ................................... 5 31-050.005 ................................... 5 31-051.006 ................................... 5 Typ-Nr. Page 31-121.022 ................................... 6 31-121.0252 ................................. 6 31-122.0252 ................................. 6 31-123.0252 ................................. 6 31-124.0252 ................................. 6 31-131.022 ................................... 6 31-131.0252 ................................. 6 31-132.0252 ................................. 6 31-133.0252 ................................. 6 31-134.0252 ................................. 6 31-151.022 ................................... 6 31-151.0252 ................................. 6 31-152.0252 ................................. 6 31-153.0252 ................................. 6 31-154.0252 ................................. 6 31-261.022 ................................... 6 31-261.0252 ................................. 6 31-262.0252 ................................. 6 31-263.0252 ................................. 6 31-264.0252 ................................. 6 31-271.022 ................................... 6 31-271.0252 ................................. 6 31-272.0252 ................................. 6 31-273.0252 ................................. 6 31-274.0252 ................................. 6 31-281.022 ................................... 6 31-281.0252 ................................. 6 31-282.0252 ................................. 6 31-283.0252 ................................. 6 31-284.0252 ................................. 6 31-421.036 ................................... 6 31-422.036 ................................... 6 31-423.036 ................................... 6 31-425.036 ................................... 6 31-426.036 ................................... 6 31-431.036 ................................... 6 31-432.036 ................................... 6 31-433.036 ................................... 6 31-435.036 ................................... 6 31-436.036 ................................... 6 31-451.036 ................................... 6 31-452.036 ................................... 6 31-453.036 ................................... 6 31-455.036 ................................... 6 31-456.036 ................................... 6 31-461.036 ................................... 6 31-462.036 ................................... 6 31-463.036 ................................... 6 31-465.036 ................................... 6 31-466.036 ................................... 6 31-471.036 ................................... 6 31-472.036 ................................... 6 31-473.036 ................................... 6 31-475.036 ................................... 6 31-476.036 ................................... 6 31-481.036 ................................... 6 31-482.036 ................................... 6 31-483.036 ................................... 6 31-485.036 ................................... 6 31-486.036 ................................... 6 31-701.006 ................................... 5 31-702.006 ................................... 5 31-703.006 ................................... 5 Typ-Nr. Page 31-704.006 ...................................5 31-705.0292 ................................. 6 31-706.0292 ................................. 6 31-707.0292 ................................. 6 31-708.0292 ................................. 6 31-709.0292 ................................. 6 31-710.0292 ................................. 6 31-711.0292 ................................. 6 31-712.0292 ................................. 6 31-713.0292 ................................. 6 31-714.0292 ................................. 6 31-715.0292 ................................. 6 31-716.0292 ................................. 6 31-717.0292 ................................. 6 31-718.0292 ................................. 6 31-719.0292 ................................. 6 31-720.0292 ................................. 6 31-743.0292 ................................. 6 31-744.0292 ................................. 6 31-745.0292 ................................. 6 31-746.0292 ................................. 6 31-747.0292 ................................. 6 31-748.0292 ................................. 6 31-749.0292 ................................. 6 31-750.0292 ................................. 6 31-801.002 ...................................5 31-810.005 ...................................5 31-901.0 ....................................... 7 31-901.2 ....................................... 7 31-901.3 ....................................... 7 31-901.4 ....................................... 7 31-901.5 ....................................... 7 31-901.6 ....................................... 7 31-901.8 ....................................... 7 31-901.9 ....................................... 7 31-902.0 ....................................... 7 31-902.8 ....................................... 7 31-903.1 ....................................... 7 31-903.2 ....................................... 7 31-903.3 ....................................... 7 31-903.4 ....................................... 7 31-903.5 ....................................... 7 31-903.6 ....................................... 7 31-903.7 ....................................... 7 31-904.2 ....................................... 7 31-904.3 ....................................... 7 31-904.4 ....................................... 7 31-904.5 ....................................... 7 31-904.6 ....................................... 7 31-904.7 ....................................... 7 31-905.2 ....................................... 7 31-905.4 ....................................... 7 31-905.5 ....................................... 7 31-905.7 ....................................... 7 31-920 .......................................... 7 31-923 .......................................... 8 31-924.2 ....................................... 8 31-925 .......................................... 7 31-928 .......................................... 9 31-929 .......................................... 9 31-931.0 ....................................... 7 31-931.2 ....................................... 7 31-931.3 ....................................... 7 27 06.2009 Index from Typ-Nr. Typ-Nr. Page 31-931.4 .......................................7 31-931.5 .......................................7 31-931.6 .......................................7 31-931.8 .......................................7 31-931.9 .......................................7 31-933.1 .......................................7 31-933.2 .......................................7 31-933.3 .......................................7 31-933.4 .......................................7 31-933.5 .......................................7 31-933.6 .......................................7 31-933.7 .......................................7 31-935.2 .......................................7 31-935.4 .......................................7 31-935.5 .......................................7 31-935.7 .......................................7 31-940 ..........................................9 31-941 ..........................................9 31-942 ..........................................9 31-945 ..........................................9 31-946 ..........................................9 31-951.0 .......................................7 31-951.2 .......................................7 31-951.3 .......................................7 31-951.4 .......................................7 31-951.5 .......................................7 31-951.6 .......................................7 31-951.8 .......................................7 31-951.9 .......................................7 31-952.0 .......................................7 31-953.1 .......................................7 31-953.2 .......................................7 31-953.3 .......................................7 31-953.4 .......................................7 31-953.5 .......................................7 31-953.6 .......................................7 31-953.7 .......................................7 31-954.2 .......................................7 31-954.3 .......................................7 31-954.4 .......................................7 31-954.5 .......................................7 31-954.6 .......................................7 31-954.7 .......................................7 31-955.2 .......................................7 31-955.4 .......................................7 31-955.5 .......................................7 31-955.7 .......................................7 61-9740.0 ...................................11 28 06.2009 Typ-Nr. Page Typ-Nr. Page Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail EAO reserves the right to alter specifications without further notice E-mail Website EAO AG Tannwaldstrasse 88 4601 Olten, Switzerland info@eao.com www.eao.com Austria +49 201 85 87 0 +49 201 85 87 210 sales.ede@eao.com Belgium +32 3 777 82 36 +32 3 777 84 19 sales.ebl@eao.com China +852 27 86 91 41 +852 27 86 95 61 sales.ehk@eao.com France +33 1 64 43 37 37 +33 1 64 43 37 49 sales.ese@eao.com Germany +49 201 85 87 0 +49 201 85 87 210 sales.ede@eao.com Italy +39 035 481 0189 +39 035 481 3786 sales.eit@eao.com Japan +81 3 5444 5411 +81 3 5444 0345 sales.esj@eao.com Netherlands +31 78 653 17 00 +31 78 653 17 99 sales.enl@eao.com Sweden +46 8 683 86 60 +46 8 724 29 12 sales.esw@eao.com Switzerland +41 62 388 95 00 +41 62 388 95 55 sales.ech@eao.com United Kingdom +44 1444 236 000 +44 1444 236 641 sales.euk@eao.com USA +1 203 877 4577 +1 203 877 3694 sales.eus@eao.com Other Countries +41 62 286 92 10 +41 62 296 21 62 info@eao.com