MOTOROLA SEMICONDUCTOR TECHNICAL DATA Switchmode Power Rectifiers ... designed for use in switching power supplies, inverters and as free . wheeling diodes, these stateoftheart devices have the following features; Ultrafast 35 and 60 Nanosecond Recovery Time 175C Operating Junction Temperature Popular TO-247 Package _ . High Voltage Capability to 600 Volts . _ Low Forward Drop Low Leakage Specified @ 150C Case Temperature ~ - Current Derating Specified @ Both Case and Ambient Temperatures Epoxy Meets UL94V-O @ 1/8 High Temperature Glass Passivated Junction Mechanical Characteristics e Case: Epoxy, Molded Weight: 4.3 grams (approximately) MUR3020WT MUR3O40WT MUR3SOGOWT Motorola preferred devices ULTRAFAST RECTIFIERS 30 AMPERES 200-400-600 VOLTS Finish: All External Surfaces Corrosion Resistant and 1 Terminal Leads are Readily Solderable e Lead Temperature for Soldering Purposes: 260C Max. 2,4 Oe ATA for 10 Seconds - 7 4 STYLE 2 e Shipped 30 units per plastic tube 2 e Marking: U3020, U3040, U3060 - _ - MAXIMUM RATINGS, PER LEG Rating Symbol MUR3020WT | MUR3040WT | MUR3OGOWT Unit Peak Repetitive Reverse Voltage VRRM 200 400 600 Voits Working Peak Reverse Voltage VRWM DC Blocking Voltage VR Average Rectified Forward Current @ 145C IF(AV) 15 Amps Total Device 30 Peak Repetitive Surge Current lEM 30 Amps (Rated Vp, Square Wave, 20 kHz, To = 145C) Nonrepetitive Peak Surge Current lFSmM 200 150 (Surge applied at rated load conditions, halfwave, single phase, 60 Hz) Operating Junction and Storage Temperature TJ, Tstg 65 to +175 C THERMAL CHARACTERISTICS, PER LEG Maximum Thermal Resistance Junction io Case ReJc 1.5 CW Junction to Ambient Resa 40 ELECTRICAL CHARACTERISTICS, PER LEG Maximum Instantaneous Forward Voltage (1) . VE Volts (Ip = 15 Amp, Te = 150C) 0.85 1.42 1.4 (Ip = 15 Amp, Tq = 25C) 1.05 1.25 1.7 Maximum Instantaneous. Reverse Current (1) ir pA (Rated DC Voltage, Ty = 150C) : 500 1000 (Rated DC Voltage, Ty = 25C) 10 10 Maximum Reverse Recovery Time tre 35 60 ns (if = 1.0 A, di/dt = 50 Amps/us) (1) Pulse Test: Pulse Width = 300 ps, Duty Cycie < 2.0%. = Preferred devices are Motorcla recommended choices for future use and_best overall value. . Revi Rectifier Device Daia 4-85MUR3020WT, MUR3040WT, MUR3060WT MUR3020WT 100 100 Ty = 150C 50 z 20 50 a 10 B 5 Lu 30 = 2 | a 20 05 X02 tu mc 04 10 ~ 0.05 0.02 0.01 on ow if. INSTANTANEOUS FORWARD CURRENT (AMPS) = Nn S im 2 to 0.2 Ot 0.2 0.4 0.6 0.8 i 12 14 1.6 Vp INSTANTANEOUS VOLTAGE (VOLTS) Figure 1. Typical Forward Voltage (Per Leg) Reta = 15C/W AS OBTAINED 10 USING A SMALL FINNED | SQUARE WAVE HEAT SINK. 6 de 4 2 Reya = 40C/w AS OBTAINED IN FREE AIR WITH NO SINK. 0 20 40 G6 80 100 120 140 160 Ta, AMBIENT TEMPERATURE (C) IF(Ay) AVERAGE FORWARD CURRENT (AMPS) 0 180 200 Figure 4. Current Derating, Ambient (Per Leg) P Fav) AVERAGE POWER DISSIPATION (WATTS). IFav) AVERAGE FORWARD CURRENT (AMPS) 9 2 40 60 80 100 120 140 140 Vp. REVERSE VOLTAGE (VOLTS) 180 = 200 Figure 2. Typical Reverse Current (Per Leg) de SQUARE WAVE. RATED VOLTAGE APPLIED 160 170 Tc, CASE TEMPERATURE (C) Figure 3. Current Derating, Case (Per Leg) (RESISTIVE LOAD) IPK = x ; lay '2- (apaciTiVELOAD) (PK 25 tay 10 20 SQUARE WAVE Ty = 125C 0 2 4 8 8 1 120SCtOdkC (sC* if(av), AVERAGE FORWARD CURRENT (AMPS} Figure 5. Power Dissipation (Per Leg) 4-86 Rectifier Device Dataig, INSTANTANEOUS FORWARD CURRENT {AMPS} I Fav), AVERAGE FORWARD CURRENT (AMPS) MUR3020WT, MUR3040WT, MUR3060WT 100 50 30 20 0.5 0.3 02 0.4 0.2 2 0 0.4 0.6 0.8 1 Te vp, INSTANTANEOUS VOLTAGE (VOLTS) 14 1.6 Figure 6. Typical Forward Voltage (Per Leg) Re, JA = 40CW AS OBTAINED IN FREE AIR WITH NO HEAT SINK. _ 20 40 60 80 Resa =i USING A SMALL FINNED HEAT SINK. 100 120 140 Ta, AMBIENT TEMPERATURE (C) 160 180 200 t fl PFiay) AVERAGE POWER DISSIPATION (WATTS) ao Figure 9. Current Derating, Ambient (Per Leg) MURSO40WT _ ~ 2 are2e mans oo oo 0.2 01 0.05 0.02 0.01 In. REVERSE CURRENT (1A) 150 Va, REVERSE VOLTAGE (VOLTS) 100 400 450 500 Figure 7. Typical Reverse Current (Per Leg) ; | SQUARE iF{Av) AVERAGE FORWARD CURRENT (AMPS) o, 40 150 160 170 180 Tc, CASE TEMPERATURE (C} Figure 8. Current Derating, Case (Per Leg) (RESISTIVE-INDUCTIVE LOAD) pa an (CAPACITIVE LOAD) Es =5 10 9 2 4 6 8 10 12 14 16 I-(av} AVERAGE FORWARD CURRENT (AMPS) Figure 10. Power Dissipation (Per Leg) Rectifier Device DataMUR3020WT, MUR3040WT, MUR3060WT if, INSTANTANEOUS FORWARD CURRENT (AMPS) IFAV), AVERAGE FORWARD CURRENT (AMPS) MURSO6GOWT 100 200 = = 100 _ 80 50 3 20 E 10 = Oo 5 30 = a 2 20 wo! & 06 in me 02 10 ol 0.05 0.02 150 200 250 300 350 400 450 500 550 600 650 Vp. REVERSE VOLTAGE (VOLTS) Figure 12. Typicai Reverse Current (Per Leg) es a = = 5 Lu oe s S 10 0.5 2 = 8 oO 0.3 u = = 0.2 i 4 = 2 0.1 = ol 1 = 02 0.4 0.6 0.8 1 12 1.4 1.6 140 150 160 170 180 vp, INSTANTANEOUS VOLTAGE (VOLTS) Tg, CASE TEMPERATURE (C) Figure 11. Typical Forward Voltage (Per Leg) Figure 13. Current Derating, Case (Per Leg) ao Raja=1 AS FROM A SMALL TO-220 HEAT SINK. (CAPACITIVE LOAD} os 25 6 LOAD) 4 Bi = Tj=1 lav nyo FSF & DM Ss DO wo Raia = 60C/W AS OBTAINED IN FREE AIR ou PF(Av) AVERAGE POWER DISSIPATION (WATTS) o o 2 40 60 80 100 120 140 160 180 200 0 2 4 6 8 Ww 2 i 16 Ta, AMBIENT TEMPERATURE (C) IF(av). AVERAGE FORWARD CURRENT (AMPS) Figure 14. Current Derating, Ambient (Per Leg) Figure 15. Power Dissipation (Per Leg} 4-88 Rectifier Device Data05 0.2 0.1 0.05 0,02 0.01 rit), TRANSIENT THERMAL RESISTANCE (NORMALIZED) O01 0.02 0.05 MUR3020WT, MUR3SO40WT, MURSO60WT Zesc(t} =") ReJc Poot | | f 1. Race 1srcw max : ee D CURVES APPLY FOR POWER *| ihe PULSE TRAIN SHOWN READ TIME AT Ty DUTY CYCLE, D=tytz TU(pk) TA = Popky Zaye) O1 02 05 1 2 5 10 ~ 20 50100 200 500 1K 1, TIME (ms) Figure 16. Thermal Response C, CAPACITANCE (pF) 0; 2 5 10 20 50 100 Vp. REVERSE VOLTAGE (VOLTS) Figure 17. Typical Capacitance (Per Leg) Rectifier Device Datam= SEMICONDUCTOR oe MOTOROLA TECHNICAL DATA Switchmode Power Rectifiers ..- designed for use in switching power supplies, inverters and as free wheeling diodes, these state-of-the-art devices have the following features: * Ultrafast 35 and 60 Nanosecond Recovery Time 175C Operating Junction Temperature High Voltage Capability to 600 Volts e Low Forward Drop * Low Leakage Specified @ 150C Case Temperature * Current Derating Specified @ Both Case and Ambient Temperatures Epoxy Meets UL94, Va @ 1/8 * High Temperature Glass Passivated Junction Mechanical Characteristics: * Case: Epoxy, Molded Weight: 4.3 grams (approximately) Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily MUR3020PT MUR3040PT MUR3060PT MUR3020PT and MUR3060PT are Motorola Proferred Devices ULTRAFAST RECTIFIERS 30 AMPERES 200-400-600 VOLTS Solderable Lead Temperature for Soldering Purposes: 260C Max. for 10 Seconds 4 Shipped 30 units per plastic tube * Marking: U3020, U3040, U3060 4 CASE 340D-01 2 (TO-218AC) STYLE 2 MAXIMUM RATINGS MUR Rating Symbol 3020PT 3040PT 3060PT Unit Peak Repetitive Reverse Voltage VaARAM 200 400 600 Volts Working Peak Reverse Voltage VRWM DC Blocking Voltage VR Average Rectified Forward Current (Rated Vr) lF(AV) 15 Te < 160C 15 Tox Amps org go 'C* 30 145C Per Device Peak Rectified Forward Current, Per Leg 'eRM 30 30 Amps (Rated Vp, Square Wave, 20 kHz), Tc = 150C @ To = 150C @ To = 145C Nonrepetitive Peak Surge Current lFsm 200 ~ 150 Amps (Surge applied at rated load conditions halfwave, single phase, 60 Hz) Per Leg Operating Junction Temperature and Ty Tstg 65 to +175 C Storage Temperature THERMAL CHARACTERISTICS PER DIODE LEG Maximum Thermal Resistance, Junction to Case Rasc 1.5 CAW Junction to Ambient RaJa 40 ELECTRICAL CHARACTERISTICS PER DIODE LEG Maximum instantaneous Forward Voltage (1) Ve Volts (ip = 15 Amps, To = 150C) 0.85 1.12 1.2 (ig = 15 Amps, Te = 25C) 1,05 1.25 15 Maximum Instantaneous Reverse Current (4) ir pA (Rated de Voltage, Tg = 150C) 500 1000 (Rated de Voltage, To = 25C) 10 10 Maximum Reverse Recovery Time ter 35 60 ns (lz = 1 Amp, di/dt = 50 Amps/uis) (1) Pulse Test: Pulse Width = 300 ps, Duty Cycle <2% Rev 3 4-90 Rectifier Device DataMUR3020PT, MUR3040PT, MUR3060PT ip. INSTANTANEOUS FORWARD CURRENT (AMPS) {AV}. AVERAGE FORWARD CURRENT (AMPS) MUR3020PT 100 30 20 04 0.05 . 0,02 - 0.01 Ip. REVERSE CURRENT (A) 0 2 4 6 80 100 120 140 160 180 200 . Vp, REVERSE VOLTAGE (VOLTS) Figure 2. Typical Reverse Current (Per Leg) | 2 2 1 = - = bt & - = 05 B Qo = 0,3 z 3 02 < = RATED VOLTAGE APPLIED > ~- wee ee 0.1 = 0 02 04 06 08 1 12 14 1.6 140 750 180 0 780 vp. INSTANTANEOUS VOLTAGE {VOLTS} Te, CASE TEMPERATURE (C) Figure 1. Typical Forward Voltage (Per Leg) Figure 3. Current Derating, Case (Per Leg) 4 _ wo Ee IP 2 g {RESISTIVE LOAD] ot Raa = 15CIW AS OBTAINED z i 10 USING A SMALL FINNED (CAPACITIVE LOAD) is = 5 HEAT SINK, z 8 10 xz s 4 . 8 L_ Raia = z Ty = 125C AS OBTAINED IN FREE AIR = WITH NO HEAT = 0620S 140 0 2 4 6 8 10 12 4 16 Ta, AMBIENT TEMPERATURE (C) IF(AV}. AVERAGE FORWARD CURRENT (AMPS) Figure 4. Current Derating, Ambient (Per Leg) Figure 5. Power Dissipation (Per Leg) Rectifier Device Data 4-91MUR3020PT, MUR3040PT, MUR3060PT 100 ip. INSTANTANEOUS FORWARD CURRENT (AMPS) 2 nn Irjavy AVERAGE FORWARD CURRENT (AMPS} 50 30 20 mn we nN 0.3 0.2 0.1 0.2 0.4 0.6 08 1.0 1.2 14 16 vp, INSTANTANEOUS VOLTAGE (VOLTS) Figure 6. Typical Forward Voltage (Per Leg) Raja = 15CW AS USING A SMALL FINNED HEAT SINK. Raa = 3 OBTAINED IN FREE AIR WITH NO SINK, 2 Tg, AMBIENT TEMPERATURE (C) Figure 9. Current Derating, Ambient (Per Leg) MUR3040PT Priay). AVERAGE POWER DISSIPATION (WATTS) I Ss S o o . _ Beg Run wn SBS jae REVERSE CURRENT (A) 0.02 0.01 100 160) =-200 S250 300-350 Vp. REVERSE VOLTAGE (VOLTS} 400 450 500 Figure 7. Typical Reverse Current (Per Leg) SQUARE WAVE RATED VOLTAGE APPLIED IF(AV}. AVERAGE FORWARD CURRENT (AMPS) 0 - 140 180 160 170 180 Tc, CASE TEMPERATURE (C) Figure 8. Current Derating, Case (Per Leg) 16 4 (RESISTIVE-INDUCTIVE LOAD) Loan) PK = 5 lav 20 Ty = 125C 4 6 8 12 lE(aV), AVERAGE FORWARD CURRENT (AMPS) 4 18 Figure 10. Power Dissipation {Per Leg) 4-92 Rectifier Device Data te | aMUR3020PT, MUR3040PT, MUR3060PT ig, INSTANTANEOUS FORWARD CURRENT (AMPS) 02, 04 06 08 1 i214 16 vp, INSTANTANEOUS VOLTAGE (VOLTS} Figure 11. Typical Forward Voltage = 2 eg Roja = 16CW AS OBT. = FROM A SMALL TO-220 = 8 Lad & 7 a a & e = 5 2 4 z 3 [square & 1 Reva = 60Cw | AS OBTAINED IN FREE AIR, NO HEAT SINK Q 0 2 6400 Oss 120 140 60 180) 200 Ta, AMBIENT TEMPERATURE (C) Figure 14. Current Derating, Ambient ig(tiyp AVERAGE FORWARD CURRENT (AMPS) 200 8 IR, REVERSE CURRENT (4A) ee a a nN oO Pray), AVERAGE POWER DISSIPATION (WATTS) MUR3060PT on o -h po soo on = R a NS OT 150 Vp, REVERSE VOLTAGE (VOLTS} Figure 12. Typical Reverse Current SQUARE WAVE RATED VOLTAGE APPLIED 160 160 Tc, CASE TEMPERATURE (C) Figure 13. Current Derating, Case {CAPACITIVE LOAD} PK = 5 lav (RESISTIVEINDUCTIVE LOAD) PK lav Ty = 125C 2 4 #6 68 0 2 IF{AV). AVERAGE FORWARD CURRENT (AMPS) Figure 15. Power Dissipation WAVE 14 Rectifier Device Data 4-93 180 16MUR3020PT, MUR3040PT, MUR3060PT = 2 a S RS Prok) Zesc(t) = rl Rese Resc = 1.5 CW MAX Ty | | | D CURVES APPLY FOR POWER PULSE TRAIN SHOWN | he READ TIME AT Ty ty DUTY CYCLE, D = tyty ek ~ TC = Pink) Zasrt S o o a o a i] 2 a r{t), TRANSIENT THERMAL RESISTANCE (NORMALIZED} o = = o 2 isd 0.05 0.1 0.2 0.5 1 2 5 10 20 50 400 200 500 1K t, TIME (ms) Figure 16. Thermal Response Ty = 25C C, CAPACITANCE {pF} 1 2 5 10 20 50 100 Vp. REVERSE VOLTAGE (VOLTS} Figure 17. Typical Capacitance (Per Leg) 4-94 Rectifier Device Data