3MTM MetPakTM 2-FB Socket 2 mm 4/5-Row, Solder Tail or Press-Fit With Tail Cover, Right Angle * * * * * * * * * End-to-end stackable Offset dual-beam contact minimizes insertion force Expanded pin counts Protective Push-Cap Monoblockable Press or heat stake peg 12 mm modular units Meets global IEC 61076-4-104 Futurebus+(R) standard See the Regulatory Information Appendix (RIA) in the "RoHS compliance" section of www.3Mconnector.com for compliance information (RIA E1 & C1 apply) Date Modified: May12, 2010 Physical MP2 Series TS-1115-C Sheet 1 of 4 Insulation: Material: High Temp LCP Flammability: UL 94V-0 Color: Beige Contact: Material: Copper Alloy Plating: Underplating: 50 " (1.27 m) Nickel Wiping Area: See Ordering Information Solder Tails: See Ordering Information Electrical Current Rating: Signal: 1.5 A - All contacts simultaneously Insulation Resistance: 103 M Withstanding Voltage: 1,000 VAC Environmental Temperature Rating: -55 C to 125 C Process Temperature Rating: 260C (Profile per J-STD-020C) Moisture Sensitivity Level: 1 (per J-STD-020C) UL File No.: E68080 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com MetPak is a trademark of 3M Company. Futurebus+ is a registered trademark of the Institute of Electrical and Electronic Engineers, Inc. (IEEE) 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM MetPakTM 2-FB Socket 2 mm 4/5-Row, Solder Tail or Press-Fit With Tail Cover, Right Angle MP2 Series 21.0 .83 12.45 .490 "A" 1.00 .039 11.80 .465 X 9.30 .366 "C" TAIL LENGTH 13.50 .531 2.00 .079 TYP. 2 1 "D" POST LENGTH 6.00 .236 2.00 .079 TYP. "B" 4 ROW PRODUCT 23.0 .91 12.45 .490 ROW E FOR SPECIAL MONOBLOCKS CONTACT 3M SALES REPRESENTATIVE D C B A 13.80 .543 mm (Inch) Tolerance Unless Noted 11.30 .445 mm 0 3 0.0 0.3 0.00 0.13 ( ) Dimensions used for Reference Only 1.00 .039 5 ROW PRODUCT 8.00 .315 Note: 1. Refer to IEC 61076-4-104 Futurebus+(R) global standard. 2. "Press Fit" describes a contact tail having a compliant section designed to make a reliable electrical connection with a plated through-hole (PTH) in a printed circuit board, typically a "back plane." Ordering Information MP2 - SXXX - X1XX - X - XXXX Plating Options: (See Table 3) Contact Count (See Table 1) C = Capped Solder Tail Blank = Press-Fit Rows 4 = 4 Rows 5 = 5 Rows Termination Style M = Solder Tail (Press Peg) (press peg requiring arbor press for PCB assembly) (Contact 3M Sales Rep) P = Press Fit (w/ Tail Cover) Tail Length (See Table 2) TS-1115-C Sheet 2 of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM MetPakTM 2-FB Socket 2 mm 4/5-Row, Solder Tail or Press-Fit With Tail Cover, Right Angle MP2 Series Table 1 - Connector & Row Lengths Pin Count Dim "A" mm (Inch) 024 11.95 Dim "B" mm (Inch) [0.471] Rows Block Count 10.00 [0.394] 4 1 048 23.95 [0.943] 22.00 [0.866] 4 2 072 35.95 [1.415] 34.00 [1.339] 4 3 096 47.95 [1.889] 46.00 [1.811] 4 4 120 59.95 [2.36] 58.00 [2.283] 4 5 144 71.95 [2.833] 70.00 [2.756] 4 6 168 83.95 [3.305] 82.00 [3.228] 4 7 192 95.95 [3.778] 94.00 [3.701] 4 8 030 11.95 [0.471] 10.00 [0.394] 5 1 060 23.95 [0.943] 22.00 [0.866] 5 2 090 35.95 [1.415] 34.00 [1.339] 5 3 120 47.95 [1.888] 46.00 [1.811] 5 4 150 59.95 [2.361] 58.00 [2.283] 5 5 180 71.95 [2.833] 70.00 [2.756] 5 6 210 83.95 [3.305] 82.00 [3.228] 5 7 240 95.95 [3.778] 94.00 [3.701] 5 8 Table 2 - Tail & Post Lengths Contact-to-PC Board Tail Termination Option No. Solder Dim. "D" 2.72 [0.107] 3.57 [0.141] 3.53 [0.139] 3.57 [0.141] Press-Fit* M1 M2 Dim "C" P1 *Compliant-Pin Tail Table 3 - Plating Plating Suffix Press-Fit Tails* Solder Tails TG30 (RIA E2 & C2 apply) (RIA E3 & C2 apply) 0.76 m [30 "] Min. Au Contact Area 2.54 m [100 "] Min. SnPb Tail Area 1.27 m [50 "] Min. Ni all over Plating Composition TR30 (RIA E2 & C2 apply) (RIA E3 & C2 apply) 0.08 m [3 "] Min. Au Contact Area 0.67 m [27 "] Min. PdNi Contact Area 2.54 m [100 "] Min. SnPb Tail Area 1.27 m [50 "] Min. Ni all over FJ (RIA E1 & C1 apply) (RIA E1 & C1 apply) 0.25 m [10 "] Min. Au Contact Area 2.54 m [100 "] Min. Matt Whisker Mitigating Sn Tail Area 1.27 m [50 "] Min. Ni all over KR (RIA E1 & C1 apply) (RIA E1 & C1 apply) 0.76 m [30 "] Min. Au Contact Area 2.54 m [100 "] Min. Matt Whisker Mitigating Sn Tail Area 1.27 m [50 "] Min. Ni all over LR (RIA E1 & C1 apply) (RIA E1 & C1 apply) 0.08 m [3 "] Min. Au Contact Area 0.67 m [27 "] Min. PdNi Contact Area 2.54 m [100 "] Min. Matt Whisker Mitigating Sn Tail Area 1.27 m [50 "] Min. Ni all over *Compliant-Pin Tail TS-1115-C Sheet 3 of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM MetPakTM 2-FB Socket 2 mm 4/5-Row, Solder Tail or Press-Fit With Tail Cover, Right Angle 2.00 .079 MP2 Series 6.00 .236 3X THESE HOLES CONSTITUTE MODULAR REPEATING PATTERN 4.00 .157 2.00 .079 TYP. 1.00 .039 A1 4.00 .157 UNPLATED THROUGH-HOLE 12.00 .472 "B" 2.05 +.05 -.00 O 0.10 .081 +.002 -.000 UNPLATED THRU HOLE O UNPLATED THROUGH-HOLE "D" PLATED THRU HOLE "D" PLATED THROUGH-HOLE O O 0.10 3.00 .118 1.50 .059 +.10 -.00 +.004 -.000 O 0.10 2.00 .079 4X UNPLATED THROUGH-HOLE RECOMMENDED 4 ROW PCB HOLE MOUNTING PATTERN 8.00 .315 RECOMMENDED 5 ROW PCB HOLE MOUNTING PATTERN Table 4 -- HOLE PLATING For TG30 and TR30 FINISHES ONLY HOLE Finished Dia. mm [in] Cu Thickness mm [in] SnPb Thickness microns ["] Drilled Hole Dia. mm [in] "D" 0.65-0.80 [.0256-.0315] 0.025 [.001] min 15 [600] max 0.81-0.86 [.0319-.0339] Table 5 -- HOLE PLATING For KR and LR FINISHES ONLY HOLE Finished Dia. mm [in] Cu Thickness mm [in] Immersion Matte Sn Thickness microns ["] Electrolitic Au Thickness microns ["] OSP ENTEK Thickness microns ["] Drilled Hole Dia. mm [in] "D" 0.700-0.800 [.0276-.0315] 0.025-0.045 [0.001-0.002] 0.5 - 2.5 [20 - 100] 0.1 - 0.5 [4 - 20] 0.2 - 0.5 [8 - 20] 0.830-0.860 [.0330-.0340] or 0.85mm [ #66 ] TWIST DRILL TS-1115-C Sheet 4 of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3Mconnector.com Please recycle. Printed in USA. (c) 3M 2010. All rights reserved. RIA-2217B-E 3M is a trademark of 3M Company.